Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹29.1 L+₹2.1 L (7.85%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹41.2 L+₹14.3 L (52.8%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
22 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 881 EWS C/o 56 APO
GE 881 EWS C/o 56 APO
SPECIAL REPAIR TO BLDG NO. T-06 AND E/M SERVICES TO BLDG NO. P-62 P-62A AT POONCH IN THE AOR OF AGE B/R-II UNDER GE 881 EWS
2022_MES_546751_2
GE/PNH-41/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE 881 EWS C/o 56 APO
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE 881 EWS
₹68,000
Yes
16 Dec 2022
30 Sept 2022
29 Oct 2022
30 Sept 2022
22 Oct 2022
8 Oct 2022
Amount
B&R PORTION:- Taking down chowkhats with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.
Taking down chowkats with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.
M&L for walling of random rubble stone/boulder masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.
M&L for walling of random rubble stone/boulder masonry brought upto course, well bonded, bedded and solidly hearted, built in cement mortar (1:6) but except stone, complete all as specified and directed.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame complete all as specified and directed.
M&L for plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S&F factory made, 2nd class hard wood, 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers size of members as specified complete all as speified and directed.
S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats complete all as specified and directed.
S & F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (b), supplied & fitted to chowkats complete all as specified and directed.
S&F Sheet glass, ordinary quality, 3mm thick and glazed with oil putty or wooden beads, in square n exc. 0.5 Sq m each pane, complete all as specified and directed.
S & F mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 100 mm complete all as specified and directed.
S&F butt hinges medium weight cold rolled mild steel 75 mm complete all as specified and directed.
S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and direted.
S&F 150 mm of aluminium, anodised, barrel tower bolt extruded section and fixed complete all as specified and directed.
S&F 100 mm of aluminium, anodised, barrel tower bolt extruded section and fixed complete all as specified and directed.
S&F 150 mm long extruded aluminium alloy handles,cast type, fixed complete all as specified and directed.
S&F 100 mm long extruded aluminium alloy handles,cast type, fixed complete all as specified and directed.
S&F harrison rails, anodised aluminium alloy plated with with fixing brackets, stops, rollers etc. complete all as specified.
M&L for 6mm thick plywood, grade BWR, type BB, fixing in ceiling with nails to timber frame work fixing in repair complete all as specified and directed.
M&L for second class softwood (Kail) as in scantling, clean sawn fixed in position with nails, including ceiling work, complete all as specified and directed.
Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type C-2 (using 4mm graded crushed stone aggregate) as in sub base, complete all as specified and directed.
M&L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with & incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed.
All as per item No 27 above but as in skirting with 10mm thick plaster in cm(1:4) complete all as specified and directed.
M&L for glazed ceramic coloured tiles (450x350mmx7mm/350x250x7mm), as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry wall surfaces, chajjas, suspended slabs & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:4 on other than fair faces of brick or stone masonry wall surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and directed.
Dismantling AC sheets or similar pattern roof covering, complete all as specified and directed.
M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
Dismantling timber scantling 40sqcm and over in section unframed work, as in any position etc , complete all as specified.
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
M&L for preparation of new steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide zinc chrome complete all as specified and directed.
M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 75 mm dia PVC floor trap with grating including jointing with solvent cement to waste pipe complete all as specified and directed.
S&F PVC (SWR) soil waste and vent pipes 75mm dia any length single socketed with rubber ring joint, laid in floor or trenches as soil pipe, complete all as specified and directed.
S&F Salt-glazed stoneware gully traps of size 150 x 100mm, square or round mouthed, type 'P' complete all as specified and directed.
S&F in repair soap dish, chromium plated fixed to plugs with brass screwsSalt-glazed stoneware gully traps of size 150 x 100mm, square or round mouthed, type 'P' complete all as specified and directed.
S&F in repair 75 mm bore PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F in repair 75 mm bore PVC(SWR) branch piece, single (single Y) equal or unequal , ordinary or inverted (spigot or socket type) complete all as specified and directed.
S&F PVC (SWR) soil waste and vent pipes 110mm dia any length single socketed with rubber ring joint,fixed to wall, complete all as specified and directed.
S&F 150mm PVC(SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair 110 mm bore PVC(SWR) branch piece, single (single Y) equal or unequal , ordinary or inverted (spigot or socket type) complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down steel tubing and connections for 20mm bore, including cleaning for refixing or removal to store complete all as specified and directed.
S&F for 15mm dia steel tubing, " medium grade', galvanised, with all fitting; laid in trenches complete all as specified and directed.
S&F for 20mm dia steel tubing, " medium grade', galvanised, with all fitting; laid in trenches complete all as specified and directed.
Supply & fixed in repairs Gate Valve (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20 mm bore complete all as specified and directed.
S&F in repair bib tap 15 mm bore, fancy type, brass CP with long shank and cup (concealed type), with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed
S&F in repair stop valve/angle valve cast copper alloy 15 mm dia, brass CP with long shank and cup (concealed type) with wall flange screwed down, high pressure, with capstan head screwed both ends for iron pipes or for unions complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed
S&F in repair PVC connection 15mm size with PTMT nuts on both ends of length 600mm, complete all as specified.
S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including flushing cistern and flush pipe, anti syphonage pipe with & including connection to 'P' branch pipe 300 to 400 mm long of size 100 mm dia, incl seat cover, health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 mtr flexible pipe, fixing nut bolts, connection to drain (or outgoing pipe), anti syphonage pipe etc, complete all as specified.
S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 190gm),complete all as specified.
M&L for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper white or any tint, over and including 1 mm thick wall care putty, complete all as specified and directed.
Material & Labour for preparation of newly plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistent exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Material & Labour for complete removal of existing treatment incl preparation of old plastered surface of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistent exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M&L for 50 mm thick PCC 1:3:6 Type C-2 (using 40mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.
M&L for cement concrete (1:2:4) using 20mm graded stone aggregate as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block, kneelers, apex stones, bed plates, roof kerbs round or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge.
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring, finished even and rough to receive the top layers, complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type-C1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.
M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement, complete all as specified and directed.
S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.
Demolition of cement concrete (reinforced) of any description and in any position (reinforcement cut as required to facilitate demolition), complete all as specified and directed.
M&L for RCC ,1:2:4 type B-0, using 12.5 mm crushed aggregate as in beams, cantilevers, bressumers, lintels over 1.5 m span and the like, complete all as specified and directed.
Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, rough finished complete all as specified.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
All as per Srl item No.74 Above but 8 to 10 mm dia TMT bars as in stirrups, spacers and binders complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks triple layer (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I, of capacity 1000 Ltrs incl with 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, including dismantling of existing tank and removing from site complete all as specified and as directed.
M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
M&L for 2nd class hardwood planed one side with butt joints, fixing in partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and directed.
M&L for 18/19mm thick extra over rates of block board or veneered particle board for external teak wood lipping, 6mm thick fixed with nails complete all as specified and directed.
S & F 30mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified.
S&F 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified.
S&F in repair galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
E&M PORTION:- Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.
S&F in repair LED batten 20W PVC body and diffuser with tricolour LED complete all as specifiecd and directed.
Dsmantling and taking down unserviceable main switches, DB etc of any type/size and making good disturbed surfaces to match with the existing finishes, complete all as specifiecd and directed.
Taking down existing wooden casing/capping from site carefully and refixing the same at existing place incl all accessories and making good disturbed surfaces to match with the existing finishes, complete all as specifiecd and directed.
M&L for point wiring with two single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 Sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including PVC casing & caping (ISI marked) of suitable size in existing wooden, casing capping including all required accessories complete all as specified and as directed for the following :-
One light/fan point/bell point controlled by one way switch 6 Amp complete all as specified and directed.
One 3/5 pin socket outlet 6 amp on same board complete all as specified and directed.
One 3/5 pin socket outlet 6 amp independent board complete all as specified and directed.
All as per srl item No 88 here in before but for one 3 pin socket outlet 16/20 Amp independent with two single core 4.0 Sqmm size cable as phase & neutral and on single core 4.0 Sqmm as in continuous earth wire complete all as specified and directed.
S&F in repair ceiling rose, 3 terminal, surface bakelite 65 mm x 50mm, PVC poly carbonate, insulated body, complete all as specified and directed.
S&F in switch, one way, 6 Amps of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivaleat in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed by Engr-in-charge. Note: Rate is inclusive of suitable cover plate and accessories of SSK heritage series (model No 701 & 702) or equivalent in Havells/Legrand/Anchor
S&F in repair switch, one way, 16 Amps of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed by Engr-in-charge. Note: Rate is inclusive of suitable cover plate and accessories of SSK heritage series (model No 703) or equivalent in Havells/Legrand/Anchor
S&F in repair bell push, one way, 6 Amps of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed by Engr-in-charge. Note: Rate is inclusive of suitable cover plate and accessories of SSK heritage series (model No 703) or equivalent in Havells/Legrand/Anchor
S&F in repair switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed.
S&F in repair switch socket combination, 6 Amps of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed. Note: Rate is inclusive of SSK heritage series switch, socket and suitable cover plate and accessories of SSK Heritage series (model No 701, 702, 707 & 752) or equivalent in Havells/Legrand/Anchor
S&F in repair switch socket combination, 3 pin, 6 & 16 Amp of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed. Note: Rate is inclusive of SSK heritage series switch, socket and suitable cover plate and accessories of SSK Heritage series (model No 725 & 756) or equivalent in Havells/Legrand/Anchor
S&F in repair socket outlet 2 in 1, 3 pin, 6 Amp of colour brushed brass or 24 Kt Gold plated of the heritage series of or equivalent in Havells/Legrand/Anchor SSK and as approved by GE and complete all as specified and directed. Note: Rate is inclusive of SSK heritage series socket and suitable cover plate and accessories of SSK Heritage series (model No 707) or equivalent in Havells/Legrand/Anchor
S&F in replacement angle type lamp holder made out of poly carbonate with metal lamp holder ISI marked with back plate fixed on PVC square block complete all as specified and directed.
S&F in repair bell push, flush type, 6 Amps, (ISI marked), complete all as specified and directed by Engr-in-Charge.
S&F in repair door bell, ding dong type (ISI marked) AC 230V complete all as specified and directed by Engr-in-Charge.
S&F in repair fan regulator flush type for 1200/1400 mm sweep ceiling fan of colour brushed brass or 24 Kt Gold plated of the heritage series of SSK or equivalent in Havells/Legrand/Anchor and as approved by GE and complete all as specified and directed. Note: Rate is inclusive of SSK heritage series fan regulator and suitable cover plate and accessories of SSK Heritage series (model No 710) or equivalent in Havells/Legrand/Anchor
Supply and fixing in repair Inverter LED batten 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make- Havells Cat part No-LHEXACP7FN1W020 or equivalent Make as specified in PS
Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. all as specified and directed.
Supply and fixing repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type in existing wooden ceiling with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in replacement round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in replacement square slim panel, LED light fitting recessed type with high efficiency PMMA diiffuser of 3 watt capacity, soft glare free light complete with driver, holder and LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Supply and fixing in replacement pearl cob swivel downlight, LED light fitting recessed type with high efficiency PMMA diiffuser of 3 watt capacity, colour warm white or as directed, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Polycab cat part No. LDO0105010 or equivalent make as specified in PS.
Supply and fixing in replacement spot (focus) track LED light fitting wall mounted surface or as suitable, with high efficiency PMMA diiffuser of 15 watt capacity, colour warm white or as directed, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Polycab cat part No. PLMD0701001 or equivalent make as specified in PS.
Supply and fixing in replacement elegant suspended round moon light with spun aluminium body with high transmittance, PMMA diiffuser of 40 watt capacity, colour warm white or as directed, suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Polycab cat part No. PLT0101423 or equivalent make as specified in PS.
S&F in repair sheet metal enclosure for DBs, VTPN, 8 way vertical suitable for TP/FP G frame MCCB of capacity 100 amps, double door (IP43) built in bus bar suitable for 415 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed. “Note:- Rate is inclusive of MCCB 200A, 4 pole with all accessories.”
S&F in repair sheet metal enclosure for DBs, TPN, 6 way, double door (IP43) built in bus bar suitable for 415 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed. “Make: Havells, DCORA DB box, Model- Klass leather, Cat Part No DSSDBX0205” or equivalent Make as specified in PS.
S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed. “Make: Havells, DCORA DB box, Model- Klass leather, Cat Part No DSSDBX0161” or equivalent Make as specified in PS.
S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 12 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed. complete all as specified and directed.“Make: Havells, DCORA DB box, Model- Klass leather, Cat Part No DSSDBX0162” or equivalent Make as specified in PS.
S&F in repair MCB isolator SPN 40 to 63 amps, capacity 10 KA, 'C' series complete all as specified and directed.
S&F in repair MCB isolator, single pole 40 amps, capacity 10 KA, 'C' series complete all as specified and directed.
S&F in repair MCB isolator, four pole, 80 amps, capacity 10 KA, 'C' series complete all as specified and directed.
Supply, laying & testing of cable in trenches/pole XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm, 3.5 core including taking down old cable, complete all as specified and directed.
Supply, laying & testing of cable in trenches/pole XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm, 2 core including taking down old cable, complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of pole, stays, laying of cables etc and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.
Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified.
M&L for dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.
M&L for sub class ‘B’ bricks old size, laid flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as cable protection, laid in trenches, complete all as specified and directed.
S&F GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps, nuts bolts etc incl taking out existing pipe complete all as specified and directed.
Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 3 of 2009 SSR Pt-I and testing complete including earth work in any type of soil, PCC 1:2:4 type B-1 as in earthing pit and cover 50mm thick reinforced with 6mm dia MS round bar @ 10cm C/C both way and MS frame, common salt, charcoal and testing on completion including dismantling unsv earthing, complete all as specified and directed.
M&L for wiring for circuit/submain wiring alongwith earth wire with 2 x 2.5 Sqmm +1x2.5Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old sub main wiring, complete all as specified and directed.
M&L for wiring for circuit/submain wiring alongwith earth wire with 2 x 4.0 Sqmm +1x4.0 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old sub main wiring, complete all as specified and directed.
S&F in repair LED 9W inverter lamp (B22 CDL), suitable for angle holder, complete all as specified and directed.
S&F in repair Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 amps, 240 volts complete all as specified and directed.
M&L for wiring for circuit/submain wiring alongwith earth wire with 2 x 6 Sqmm +1x6 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old sub main wiring, complete all as specified and directed.
M&L for wiring for circuit/submain wiring alongwith earth wire with 2 x 10 Sqmm +1x10 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed as required including taking down old sub main wiring, complete all as specified and directed.
S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.
narayan construction
NATIONAL TRADING COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .