NIT No. 07 (22-23) Item No. 4

Renovation of E&M Equipment of 03 nos. tube wells:- Booster Pump LIG Loni Road, Water Emergancy Loni Road, 80 yard mandolin tube wells :- Supply of deep well Submersible pump set 15 HP,3 Phase, AC supply, working Voltage 415 V, having discharge 990/1100 LPM at head 48 Mtr. Make-BS/ KSB/ Mody Havells.

Ultra bright LED Tube light (single side connection) with very high efficacy - 18 Watt. SOR 2022 item code 19.1.2 Make:- Havells/Bajaj/Crompton

Supply of PVC insulated PVC sheathed flat submersible cable, copper conductor (flexible) cable, Size 3 core x 6 Sq mm ,1100 Volts, conforming to IS 694 .Make:- Havells/Finolex/PolycabDJB approved make

Supply of LT power Aluminum cable, solid, XLPE, insulated PVC armored 650/1100 V-grade as per IS 7908 (Part-I) 1988 size 3.5 x 35 Sqmm.Make:- Havells/Gloster/Grandey/ DJB approved make

Supply of 45W. L.E.D Light energy saving & environmental friendly long life Versatile pressure die-cast aluminum IP 66 roadway laminate with high power L .E. D as light source. MAKE-HAVELLS,BAJAJ/CROMPTON (SOR code :- 19.10.5)

Supply of Nut Bolts, Washer. ISI Mark

Fabrication/ Supply of venturi assembly 80 mm dia. with complete accessories as required at site.

Supply of G.I. tail piece medium class of 0.5 mtrs long including one end flanged and other end threaded of 80mm as per site requirement.

Supply of 80mm dia. GI Bend with both side flanges duly welded and threaded as per site requirement.

Supply of CI. D.F. non rising spindle sluice valve, PN 1.0 Size 80mm dia. Make:- Kirloskar/ IVC/ DJB approved make. (SOR E&M code :- 4.7.4)

Supply of CI, D.F. swing checks NRV.P.N. 1.0 Size 80mm dia. Make:- Kirloskar/ IVC/ DJB approved make. (SOR E&M code :- 4.9.4)

Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed medium class PVCconduit, with piano type switch, phenolic laminated sheet,suitable size M.S. box and earthing the point with 1.5 sq.mm.FRLS PVC insulated copper conductor single core cable etc. asrequired. (DSR E&M 2018 item no. 1.8.3)

Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVCinsulated, copper conductor, single core cable and earthing etc.as required. (DSR E&M 2018 item no. 1.41)

Supplying and fixing of 32 mm dia X 2.00 meters long G.I. pipe(medium class) bracket for mounting of fluorescent / HPMV /HPSV street light fitting on pole including bending the pipe to therequired shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts,bolts and washer, painting the flat iron with primer and finishpaint etc. as required (DSR E&M 2018 item no 12.34)

Workmanship Charges for lowering the submersible pump set and fixing other electrical items in 4 no. bore well, Fixing/Erection/Installation of E&M equipment, accessories, testing and commissioning on load with satisfactory functioning of Pump. The work includes all sundry required items for completion of work, i.e. eccentric taper, rubber gasket, necessary reinforcement and vibration isolation arrangement, etc. and loading, unloading, cartage, making good all damages caused during installation and restoring the same to their original finish as required, adequate safety provision, barricading, warning signal and other safety measures while executing the work or wherever necessary so as to avoid accident. The components of the installation shall be of such design so as to satisfactory function under all conditions. The tube well will be commissioned on automation mode and timing to be set as per direction of Engineer-in-Charge. The all sundry items which are useful & necessary for operation of Tube well in automation mode shall be deemed to have been included, whether such items are especially in specification or not.

Swarn Engineers

Gupta Brothers