Loading
Loading…
Loading…
Tender Value
₹71.2 L
EMD Value
₹1.4 L
Closing Date
5 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIG/NORTH
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less ;where V= Advertised value of the tender in crores of Rupees N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, asper the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information asper format-6, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s)during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i)Three similar works each costing not less than the amount equal to30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any signaling work involving outdoor work and / or addition and /or alteration in existing Indoor signaling system. OR any CLS or RI or EI or TPWS or IBS or ABS or BPAC work involving indoor and/or outdoor. Similar work to include indoor if the tendered work involves addition and / or alteration in existing indoor signaling system and outdoor if the tendered work involves outdoor work. OR Any such work involving activities as given in the name of the tendered work.
14 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own or on behalf of a partnership concern. If the tender is submitted on behalf of a partnership concern, he should submit the certified copy of partnership deed (PD) along with the tender and authorization to sign the tender documents on behalf of partnership firm. If these documents are not enclosed along with the tender documents, the tender will be treated as having been submitted by individual signing the tender documents. The tenderer whether sole proprietor, a limited company or a partnership firm if they want to act through agent or individual partners should submit along with the tender or at a later stage, a power of attorney(POA) duly stamped and authenticated by a Notary public or by Magistrate in favour of the specific person whether he or they be partners of the firm or any other person specifically authorizing him or them to submit the tender, sign the agreement ,receive money, witness measurement, sign Measurement Books, compromise, settle, relinquish any claims preferred by the firm and signed No claim certificate and refer all or any dispute to arbitration.
Tenderer should clearly state the status of firm and submit the relevant document in support of authentication, in absence of following/relevant documents the offer of tenderer is summarily rejected: (A)Self-declaration /proprietorship certificate in case of proprietor firm along with POA if any. (B) Partnership deed and power of attorney in case of partnership firm. (C)Certified copy of an extract of resolution passed by the board of directors in case of limited firm or Private Limited Company
(a) Sole Proprietorship Firm: (i)All documents in terms of Para 10 of the Tender Form (Second Sheet)of Tender document
(b) HUF: (i)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and 1.1.2 he has the authority, power and consent given by other members to act on behalf of HUF. (ii)All other documents in terms of Para10 of the Tender Form (Second Sheet)of Tender document
(c) Partnership Firm: (i)All documents as mentioned in para18 of the Tender Form document
(d) Company registered under Companies Act2013: (i)The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation(iii)A copy of Authorization/Power of Attorney 1.1.4 issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) of Tender document
(e) LLP (Limited Liability Partnership): (i)A copy of LLP Agreement (ii)A copy of Certificate of Incorporation (iii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from 1.1.5 participation intenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/ LLP or JV in which they were/ are partners/members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract.(v)All other documents in terms of Para 10 of the Tender Form(Second Sheet).
(f) Registered Society & Registered Trust: (i)A copy of Certificate of Registration (ii)A copy of Memorandum of Association of Society/Trust Deed (iii)A copy of Power of Attorney in favour of 1.1.6 the individual to sign the tender documents and create liability against the Society/Trust. (iv)A copy of Rules & Regulations of the Society (v)All other documents in terms of Para 10 of the Tender Form (Second Sheet) of tender document
Information as per Para 16 of GCC Part (1)(Tender form second sheet Annex-I) related to Employment/Partnership Etc. of Retired Railway Employees and Clauses 59 (9) & 62 (1) (xv) to GCC regarding employment etc. Of retired government officers by railway contractors
Certificate of Information regarding EMPLOYMENT/PARTNERSHIP etc. of Retired Railway Employees with the tender as per the attached proforma, Format 11 of tender document
Certificate of NO RELATIVE being an employee of Western Railway as per attached Performa Format10 of Tender document
Signal & Telecom outdoor work in connection with the replacement of the existing steel girder by Precast PSC slab under ADEN (NDB) jurisdiction (Total 30 spans) of Ukai songadh-Jalgaon section of Mumbai Division.
SG_216_2_136_WA_R
SG_216_2_136_WA_R
Open
Works - General
6 Months
Mumbai, Maharashtra
₹0
₹1.4 L
5 Jun 2026
11 May 2026
22 May 2026
117 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 18,94,091.15 | ||
| — | 5.00 | — | — | ||
| SS Location box made of Spl Grade SS 304 of sizeas per drg.No.DRM/SG/948 (Single app. Case).Themanufacturer's certificatein regard to grade ofstainless steel and testreport be submitted atthe time of supply. Note:-(1)Enclosure should bemade of 1.6 mm & doormade of 2 mm thick SS304 sheet. (2)SS 20 mm(rod) X 100 mm(height)male female hinges formoving door smoothly.(3)SS 16 mm Rod fixhandle for both the door.(4)SS sheet stiffner(0.8to 1 mm thickness) tostrengthen the door bothside. (5) SS hook (6 mmrod) to be provided onboth doors forkeepingthe door open position.Stoppers to be providedfor both doors. (6)E-typelocking arrangement(W11) for bothdoor andlifting hook (5X150 mm)02 Nos (7) SS sheet 450mm x 650 mm for fulllocation box provision ofany writingwork at frontside door etc. (8)Provision of switch boardfor location light fittedwith one two pin holder,One three pinsocket(female) and two pianotype switches of 6A forlocation boxes withinternal wiring 2.5 sq.mm flexible copperwires,Holders ,socket andswitch should be of ISImark. (9)Indian Railwayproperty tag is to be provided on two sidewithfollowing details, Sr. No,Manufacturing firm name& year of Manufacturing.(10)White enamel paintshall be providedinsidelocation box. (11)SSangle frame 30 mm x 30mm x 5 mm is providedalong with location box. (12)Earth GI clamp5 mmx 50 mm flat is providingto location at two ends toconnection earth GI patti. (13)All hardware used inlocation boxfor mountingarrangements shall be ofSS (nuts, bolts, washersetc). (14)Suitable locationbox Hylam fabrication toprovidethe clear space ofwriting to 18 cm to 20 cm(15) Packing eachlocation box to beshipped using wrappingplastic sheetaroundlocation box | — | — | — | 2,99,279.9 | |
| — | 10.00 | — | — | ||
| SS Location box is made of Spl Grade SS 304 of sizeas per drg. No.DRM/SG/945 (Half app.Case).Manufacturer'scertificate in regard tograde of stainless steeland test report shall besubmitted at the time ofsupply.Note:- (1)Enclosedshould be made of 1.6mm & door made of 2mm thick SS 304 sheet.(2)SS 20 mm (rod) X 100mm(height) male femalehinges for moving doorsmoothly. (3)SS 16 mmRod fix handle for boththe door. (4)SS sheetstiffner(0.8 to 1 mmthickness) for strengthenthe door both side. (5) SShook (6 mm rod) to beprovided on both doorsforkeeping the door openposition. Stoppers to beprovided for both doors.(6)E-type lockingarrangement (W11) forbothdoor and lifting hook(5X150 mm) 02 Nos (7)SS sheet 250 mm x 450mm for half location boxprovision of anywritingwork at front side dooretc. (8) Provision ofswitch board for locationlight fitted with one twopin holder, One threepinsocket (female) and twopiano type switches of 6Afor location boxes withinternal wiring 2.5 sq.mm flexible copperwires,Holders ,socket andswitch should be of ISImark. (9)Indian Railwayproperty tag is providedon two side withfollowingdetails, Sr. No, Manufacturing firm name& year of Manufacturing.(10)White enamel paintshall be providedinsidelocation box. (11)SSangle frame 30 mm x 30mm x 5 mm is providedalong with location box.(12)Earth GI clamp 5mmx 50 mm flat is providingto location at two ends toconnection earth GI patti.(13)All hardware used inlocation boxfor mountingarrangements shall be ofSS (nuts, bolts, washersetc). (14)Suitable locationbox Hylam fabrication toprovidethe clear space ofwriting to 18 cm to 20cm. (15) Packing eachlocation box to beshipped using wrappingplastic sheetaroundlocation box. | — | — | — | 5,19,980.6 | |
| — | 15.00 | — | — | ||
| IS 13410: Glass Reinforced Polyester Sheet Moulding Compounds (SMC) Size of Sheet : 1000x1000x8. | — | — | — | 80,830.05 | |
| — | 2000.00 | — | — | ||
| ARA Terminal blocks with links made of PBT Spec No.IRS/75/2006(Rev - 2) with latest amendments andRDSO Drg.No.SA-23741A Alt.4. | — | — | — | 1,50,000 | |
| — | 2000.00 | — | — | ||
| Disconnect Terminal Block, Screw less type, 4-wire front entry (Two in-put & Two out- put) The color willbe decided by Engineer - in - Charge. (Preferably In Blue, Red & Grey Colors in the ratio of 1:2:3). as per RDSO Spec.No. RDSO/SPN/189/2004. With latest amendments. Note: Make to be approved by Railway before supply. | — | — | — | 1,17,060 | |
| — | 500.00 | — | — | ||
| Supply of End plate 2.5mm/0.091 in thick as per site requirement. | — | — | — | 5,535 | |
| — | 500.00 | — | — | ||
| Supply of End Stopper 10mm/0.0394 in width as per site requirement. | — | — | — | 5,430 | |
| — | 55.00 | — | — | ||
| Supply of Carrier Rails for above 35mm x 7.5mm, 1mm/0.039 in thickness un-slotted type as per siterequirement. | — | — | — | 6,263.4 | |
| — | 50.00 | — | — | ||
| Double Walled Corrugated(DWC) HDPE Pipe withassociated collars etc. as perRDSO SpecificationNo.RDSO/SPN/204/2011 orlatest anti-rodent & anti-oxidant and non flamepropagating type in 6 metersstraight lengthand of size120 mm outer die,& 103.5mm inner dia. (Themanufacturers, suppliersmust produce valid IS licenseandshould be certified underISO 9000 and shall submitcopy of certificate). One ofthe following couplingarrangementsshould also besupplied with each pipe asper the site requirement. 1)Suitable snap fit coupler withrubber 'O-Ring 2)Spacers 3)Tees 4) Bend, 5) End-cap(The total quantity of aboveitems is equal to no. of pipessupplied.) DWC pipe shallbemarked at every 1 mtr lengthin such a way thatmanufacturer's name, vendername and year ofmanufacture can beeasily identified. | — | — | — | 95,610 | |
| — | 200.00 | — | — | ||
| Medium Class G.I. Pipes to IS: 1239 (Pt.)-2004 or latest; 100mm dia. (int. Dia) 3.65 mm thick or abovewith coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I.pipes. | — | — | — | 2,34,056 | |
| — | 15.00 | — | — | ||
| Maintenance Free Earth Electrode of length 3m, including supply of 3 bags of Earth enhancementmaterial for earthling (10KGs/bag) for each electrode & other accessories as per Drg. No. SDO / RDSO/ E&B/001 andRDSO Spec No. RDSO / SPN/197/2008. This item includes the following items: (a) Copper bonded steel earth electrodeof 3.0 meter long & 17.2 mm dia with Cu-bonding thickness of min 250 micron - 1 no. (b) Earth-enhancing compound(10 Kg/Bag) - 3 No. (c) Cu-strip 200 X 25 X 6 mm to terminate earth rod = 1no. (d) Cu-strip 300 X 25 X 6 mm (MEEB)= 1 no. (e) Cu- strip 150 X 25 X 6 mm (SEEB) = 1 no. (Inspection by RDSO) | — | — | — | 1,56,046.2 | |
| — | 20.00 | — | — | ||
| Supply of Signalling Rapid Joint UV resistance cable jointing system with two half separated enclosuretapered at both ends filled with cross linked polymer and highly robust insulating plastic case class -2 joint . The jointshall be as per RDSO draft specs no. RDSO/SPN/TC/101/2012, the jointing kit suitable for signalling cable Size 6 x 1.5,12 x 1.5, 19 x 1.5 , 30 x 1.5 mm2. Note: The joint made by rapid jointing kit for signalling cable will be temporary. | — | — | — | 2,24,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
136RTD.pdf
ATTACHMENT
136RTD.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .