SPECIAL REPAIR TO MES BLDG NO T-396 AT SILA GARRISON UNDER AGE (I) CIF (U) REASI

Amount

M&L Brick work with sub class 'B' bricks, straight or curved on plan in CM 1:6 complete all as specified and directed.

M&L Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished fair and smooth complete all as specified and as directed. Note: WPC shall be measured and paid separately.

M&L Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of primer including birla putty 1mm thick complete all as specified and directed.

M&L for preparing the external newly Plastered surfaces of walls and applying two coat of Cement base paint over one coat of alkali resistant priming paint complete all as specified and directed.

Preparation of old or previously treated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (camouflage pattern) complete all as specified and directed.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto as per item no 9 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L reinforced cement concrete nominal mix type B1 1:2:4 ( using 20mm graded aggregate) as in beams complete all as specifed and directed.

M&L Formwork to sides and soffits of floor or roof beams, fair and finished surface of concrete, complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commerial type of one side and another face is covered with aluminium sheet, 0.5mm thick, fixed with aluminium alloys screws complete all as specified and directed.

S & F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for coloured glazed ceramic tiles (designer Pattern, HL) in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7 mm /450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed .

M&L coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L coloured joint free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed/bedding layer in CM 1:4 complete all as specified & directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M & L 50mm thick Cement concrete PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in sub base complete all as specified and directed.

S & F 60mm thick M-35 grade Machine pressed precast concrete coloured interlocking paver block of any shape and conforming to IS 15658-2006 complete all as specified and directed.

M&L for 50mm thick Cement concrete 1:3:6 type C-1 (using 20mm graded agg) as in plinth protection, and finished even and smooth without using extra cement all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness and type, including cover fillets complete all as directed by the Engineer in charge.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, (Size of grid 605X605 mm) complete all as specified and directed.

S&F 16mm thick mineral fibre board (designer Pattern) fixed or laid/ inserted to timber/GI/ Aluminium framework with screws complete all as specified and directed.

M&L 50 mm thick Cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in flooring/ hard standing and plinth protection complete all as specified and directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down old pipes complete all as specified and directed.

S&F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking down old pipes complete all as specified and directed.

S&F in repair Stop valve cast copper alloy (ISI Marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 20mm bore dia, complete all as specified and directed.

S&F PVC (SWR) 'S' trap 100/110mm complete all as specified and directed.

S & F PVC SWR pipes 110 mm dia single socketed in any length with rubber rings joints, laid in trenches or in floors including taking down existing pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as spd and directed.

Supply & fixed in repair PVC flushing cistern low level of 10 ltr capacity, white, valve less symphonic action type complete with inlet ball valve float and handle or Push button type including brackets complete all as specified & directed.

S&F in repair Vitreous china ware wash down water closet pan (pedestal pattern), white excluding fixing bolts, flushing cistern and flush pipe, complete all as specified and directed.

S&F in repair Vitreous China white soap dish, fixed to plugs with chromium plated brass screw of approximate size 160x 160x90mm complete all as specified and directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and plastic cleats of minimum weight 190 gm complete all as specified & directed.

S&F in repair fancy type CP brass central hole basin mixer for mixing hot & cold water supply screwed down for iron pipe of 15 mm bore dia complete all as specified and directed.

Supply & Fixing rotational moulded polyethylene water storage tanks of capacity 1000 litres, (cylindrical vertical with closed top) hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts and washer, 20mm ball brass valves, high pressure, with polythene float and flynut complete etc including dismantling existing water tanks of any description complete all as specified and directed.

S&F in repair fancy type stainless steel Drapery rods 19/20 mm bore for curtain rails including supply and fixing of stainless steel brackets, fancy stainless steel stops and curtain rings (06 Nos per mtr) complete all as specified and directed .

S&F Bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, for bore dia of pipe 15mm, complete all as specified and as directed by Engineer-in-Charge. Cat Part No. :- QQT-7037 of make Jaquar or equivalent in approved makes. Note : - Bib tap shall be of ISI marked.

S&F in repair brass CP Wall mixer of 15mm bore with provision for overhead shower with 115mm long bend pipe on upper side connecting legs, wall flanges and fixed, complete all as specified and as directed. Cat Part No. :- MQT-517BKN, Make:- Essco Marvel series or equivalent in approved makes.

S&F in repair Chromium plated overhead shower rose 125 mm size or more single flow with swivel joints and stainless steel extension rod fixing to steel pipe or union, complete all as specified and as directed. Cat Part No. :- EOS-542A, Make Essco or equivalent in approved makes.

S&F in repair fancy type Stop valves, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of 15mm bore, complete all as specified and as directed. Cat Part No. :- MQT-514AKN, Make:- Essco Marvel series or equivalent in approved makes.

S&F in repair Angular valve cast copper alloy, screwed down, for bore dia of pipe 15 mm, complete all as specified and as directed by Engineer-in-Charge. Cat part No. :- QQT-7053 of make Jaquar or equivalent in approved makes.

S&F in repairs Vitreous China Ware Wash hand basin coloured, flat back, size 575 x 465 x 195 mm size with long pedestal, including 32mm dia stainless steel waste coupling of Make Jaquar (Cat Part No. :- ALD-705L130) & CI Brackets including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed. Make Jaquar solo Cat Part No. :- SLS-WHT-6801 for wall hung basin and Cat Part No. :- SLS-WHT-6301 for full pedestal or equivalent in approved makes.

S&F in repair Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. Cat Part No. :- ACN-1153S, Make : Jaquar or equivalent in approved makes.

M&L Reinforcement cement concrete type M-15 nominal mix (20mm graded crushed aggregate) as in slabs supported on walls complete all as specified and directed.

M & L formwork to soffits of suspended slabs such as roof slab not exceeding 200mm thick complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed. (Make:Dr. Fixit, Pidilite or equivalent in approved make).

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc all as specified and directed.

M&L for point wiring concealed complete with FRLS PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 1.5 Sqmm (nominal area) multi stranded copper conductor cable drawn through in including non metallic medium grade rigid PVC conduit ISI marked, 19/20 dia including all accessories on the surfaces of walls/ floors/ceiling and making good the disturbed surfaces, with and including sunken type pressed steel welded MS terminal box 1.2mm thick bakelite laminated sheet top cover 3mm thick and 1.5 Sqmm copper earth continuity wire connected to earth dolly complete for one light point/fan point/exhaust point controlled by one switch complete all as specified and directed by Engineer in charge.

Description all as per item no. 60 above but for one 3 pin socket outlet, 5 amps, independent, with cables 1.5 sqmm size with 1.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing.

Description all as per item no. 60 above but for one 3 pin socket outlet, 5 amps, on the same board with other switches, with cables 1.5 sqmm size with 1.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing.

Description all as per item no. 60 above but for one 3 pin socket outlet, 15 amps, independent, with cables 2.5 sqmm size with 2.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing.

S&F Recess mounting LED 2 x 2 Luminaire Neutral White coated CRCA housing with high efficiency LEDs, aluminium front frame with flat white high transmission acrylic cover, 36 watt, 240 volts AC, compete with all accessories with twin core twisted flexible copper conductor of suitable size all as specified and directed. Make:- Bajaj, Model:- SKYLITE BCTBLR 36W ZTN WH, Cat Part No:- 111981 2 x 2 ft NEUTRAL WHITE or equivalent in C&S/Havells/CG/Wipro.

S&F LED flourescent tube light fitting 1 x 20 W, indoor decorative aluminium extruded T5 LED batten integrated type, white complete with all accessories with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make:- C&S, Model:- Nakshatra/20W/W, Cat Part No:- LTTB4F20WLED/W- 4 Ft white or equivalent in Bajaj/Havells/CG.

S&F 1 x 10 W LED bulk head luminaires, IP65 LED Bulk Head in engineering plastic housing with clear prismatic diffuser with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz. Make:- C&S e-TARTA Series Cat Part No :- e-TARTA/10 Watt CG80IB10WLED White or equivalent in Bajaj/Havells/CG.

S&F switch piano flush type button single pole one way 5 Amps 230V complete all as specified.

S&F ceiling rose, PVC/Polycarbonate, isolated body surface type 65mm dia, three terminals, single phase 230V complete all as specified.

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal, complete all as specified.

S&F switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal, complete all as specified.

S&F for isolator single pole and neutral 40 Amps, 240 volts, complete all as specified.

S&F MCB single pole 6 to 32 Amps, 240 V, complete all as specified.

S&F sheet metal enclosure for DBs double door when MCBs to be used single pole and neutral 8 way 240V with 200 Amps rated bus bar, complete all as specified.

Taking down the existing ceiling fans and re-fixing/hanging the same in position including provision of cable from ceiling rose and connecting to fan complete all as specified and directed.

S&F in replacement with new stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required including taking down old unserviceable electronic fan regulator for 1200/1400mm sweep complete all as specified and directed by Engineer in charge.

S&F in replacement new LED street light luminaires in a single piece, IP 65 powder coated pressure die cast aluminium SMD LED street light with heat resistant toughened glass, 45 watt, having LED in built control gear including upto 2.5 mtr twin core conductor for connection of street light fitting from LT OH line/ ceiling rose including taking down old unserviceable street lights all as specified and directed by Engineer in charge. Make:- C&S, Cat Part No. INDUS-i/45W, LTESSI45WLED or equivalent in Philips/CG/Havells/Bajaj/Wipro.

S&F in replacement with new bracket for street light fitting made out of GI tubing 50mm medium grade pipe 2' x 1-1/2' 135 degree bend with cutting, welding and two MS bracket with nut bolts and washer including bracing to pole/on fencing and taking down old unserviceable brackets all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (Earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregates with XPM(weight not less than 4kg/sqm) and frame of angle iron 25x25x6mm with lugs 2 Nos and with 20mm bore pipe for watering, perforated at bottom 1.75mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified and directed including testing on completion.

Supplying or laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections of size 10 Sqmm, 2 core including taking down old unserviceable service cable complete all as specified and directed by Engineer in charge.

Note:- Schedule of credit Rs. 31,626.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Mohd Rafiq and Co

R C TRADERS