PROVISION OF PATHWAY AND STAIRS CONFIGURED WITH LEVELLING OF SURFACE ALONG WITH CHEQUERED TILES AT OTHER RANKS MESS OF CIF(R) SIG REGT UNDER AGE (I) CIF (R).

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified.

M&L for 100 mm thick plain cement concrete, 1:4:8, type D-2 ( using 40 mm graded crushed stone aggregate ) as in sub base and paving, complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors/ path/ treads/ risers with grey cement and pigment over 20mm thick screed bed in cement mortar 1:4 and pointed in white or colour cement to match, complete all as specified and directed by Engr-in-charge.

Removing excavated material to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4, complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and smooth complete all as specified and directed by engr-in-charge.

M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamferred angles and throughting, complete all as specified and directed.

75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete ( unreinforced) in ground floors and pavings n exe 15 cm thickness. ( below or above ground level) all as specified.

M & L for PCC 1:3:6, Type- C-1 (using 20mm graded crushed stone aggregate) as in surface channels & drains, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete , using extra cement , including forms , moulds, mitred/ stopped ends etc. all as specified.

M&L for PCC 1:2:4, type B-2 using 40mm graded crushed stone aggregate as in wall/ sides of drains including necessary formwork complete all as specified and directed

Mild Steel TMT bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

Mild Steel TMT bars 6 to 8 mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.

M & L for precast reinforced cement concrete 1:2:4, type B-1 (using 20 mm graded crushed sotne aggregate) as in cover slab and similar articles including necessary moulds/form work set in Cement mortar 1:4, complete all as specified and directed.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of ₹ Nil during AOC Note:- Tenderers shall not quote for this Schedule

SUBASH CHANDER SHARMA AND SONS

NATIONAL TRADING COMPANY

M/S RAHUL GUPTA

arneesh kumar suri

J. PRO BUILDERS