TD-528/26

Schedule-5 Summary

Tender Inviting Authority: Superintending Engineer, Electricity Transmission Design Circle, 10th Floor, Shakti Bhawan Extension, 14-Ashok Marg, Lucknow-226001

Name of Work: Design, Engineering, Manufacturing, Testing, Supply, Stringing, Installation, Testing & Commissioning etc. for Construction of 132 KV Transmission line on ACSR Panther conductor (approx. 10 route Kms) of UPPTCL, on Turn-key basis

Tender No: TD-528/26

Bidder Name & Address :

SCHEDULE OF QUANTITIES AND PRICES

1 Total Price for Supply [Schedule S-1 ]

2 Total Price for Work [Schedule S-2 ]

3 Total Price [S-1+S-2]

Total Bid Price including GST [3+4]

Date: Signature

Name & Address of Company

SCHEDULE S-1 : (SUPPLY OF MATERIAL)

Tender Specification No.: TD-528/26 Name of Firm:

S N Item Unit Qty Ex-Work per unit rate (Rs.) Freight (Rs.) P&F (Rs.) INS (Rs.) Unit FOR Destination rate (5+6+7+8)(Rs) Total Amt (Exclusive of GST) (Rs.)

a Fabrication, galvanizing, Inspection and supply of DC towers including stubs, extension and stub-setting templates, gantry structures as per drawings & BOM

(i) Mild steel MT 0.2000

b Hot dip galvanized, Hexagon round hexagon head transmission tower Bolts Nuts and washers for above structures as per BOM MT 0.000

2 TOWER ACCESSORIES

(a) Number Plate Nos. 51

(b) Danger Plate Nos. 51

(c) Phase Plate in sets of red, blue and yellow for Tension towers Nos. 51

(d) Bird Guard for towers Nos. 78

(e) Pipe type earthing material for towers Nos. 51

3 Porcelain Insulator

(a) 70kN Nos. 1000

(b) 120kN Nos. 6000

4 HARDWARES SUITABLE FOR ACSR PANTHER

(a) Single suspension fittings Nos. 75

(b) Single Tension fittings Nos. 220

(c) Double Tension fittings Nos. 40

5 CONDUCTOR ACCESSORIES SUITABLE FOR ACSR PANTHER

(a) Vibration Dampers Nos. 605

(b) Mid Span compression Joint Nos. 60

(c) Repair sleeves Nos. 40

(d) Performed Armour Rod Nos. 90

(a) 48 Fibre (DWSM) OPGW Fibre Optic Cable route km 12

(b) Supply of Installation Hardware set for 48 Fibre (DWSM) OPGW* route km 12

(c) Joint box (48 Fibre) Nos. 5

(d) FODP 96F Nos. 2

(g) Fibre Optic Approach Cable for 48 F OPGW route km 1

(h) Supply of Installation hardware set for 48 Fibre(DWSM, G.652D) Fibre Optic Approach Cable* route km 1

GST@18%(mailto:GST@18%25塹ᴻ䡿ⲯ嶂藄挧ꮥ)

* GST shall be paid extra (applicable at the time of supply/work) on total of Ex-Works, Packing and Forwarding, Transportation and Insurance Charges. Present rate of GST on work contract is 18%.

Date: Bidder Name:

Name & Address of Company

* One set of installation hardware set shall contain all installation hardware fittings& accessories as may be required for 1 km of OPGW/Fibre Optic Approach Cable

* GST shall be paid extra (applicable at the time of supply/work) on total of Ex-Works, Packing and Forwarding, Transportation and Insurance Charges. Present rate of GST on work contract is 18%.

Date: Bidder Name:

Name & Address of Company

SCHEDULE-S-2 (Erection work)

Tender Specification No.: TD-528/26 Name of Bidder(Firm):

SN DESCRIPTION UNIT Qty. Unit Rate Amount Ecxclusive of GST (Rs.)

1(i) Survey including preparation of schedule of materials, marking of locations (Route length),GPS Survey of line with co-ordinates of each tower(The length of line shall be authenticated by GPS Survey) Km 10

1(ii) Check survey Km 10

1(iii) Soil testing Locs. 51

2 Cost of excavation of 132 KV tower foundation pits including all earth work,backfilling, levelling etc. Cu.m. 0.800

3 Setting of stubs including all foundation work but excluding the cost of concerting and excavation (Rate per location) for following towers :

i 132 KV DA Nos. 13

ii 132 KV DB Nos. 15

iii 132 KV DC/DE Nos. 17

iv 132kV Gantry Nos. 6

4 Cost of concreting for all types of tower foundation including cost of cement,dewatering,shoring and shuttering,forming,curing but excluding cost of reinforcement bars

i 1:2:4 concreting Cu .m. 0.799

5 Erection of Superstructure of 132KV Towers and Anchor tower and their extensions wherever required including all work above ground level excluding hoisting of insulators, hardware & accessories, but including fitting of danger number, phase plates, bird guard and fixing & punching for 132KV SC/DC lines MT 0.200

6 Tack welding of all the bolts up to the height of one section of the tower or 5 meter from ground level whichever is higher with three tacks at 1200seperatiion of minimum 10 mm thickness with 10mm/12 mm electrode & application of Zinc rich Aluminium paint on the affected surface including cost of all material including tack welding of River Crossing tower & Anchor towers. per bolt 3000

7 Laying, stringing, tensioning clamping, jointing etc of ACSR ‘Panther’ conductor including hoisting of insulators , fitting of all necessary hardware and accessories i.e. fittings Armour rods, vibration dampers etc.on all Six phases of 132 KV DC lines per route Km 10

8 Laying, stringing, tensioning, clamping, jointing,including fittings of all necessary Hardware and accessories of OPGW & OFAC, termaination at S/s, end to end connectivity & testing etc on 132KV & 220 KV lines per route Km 12

9 (a) Grounding work including earth work etc for pipe type grounding including cost of coke & salt. Nos 50

(b) (b) Grounding work including earthwork etc for counterpoise grounding materials including cost of all material Nos. 1

10 Installation of steel reinforcement bars in R.C.C. foundation including cost of steel reinforcement bars with cutting, bending, placing, binding etc. MT 6.86

Date: Bidder Name:

Name & Address of Company