GE AF NO.1/GUR-19/2023-24 REPAIR MAINTENANCE AND REPLACEMENT OF HIGH MAST LIGHT STREET LIGHT PARAMETER SECURITY LIGHT SOLAR LIGHT INCLUDING REPLACEMENT OF UNSERVICEABLE CONVENTIONAL FLOOD LIGHT STREET LIGHT FITTTING WITH ENERGY EFFICIENT LED LIGHT FI

Amount

M&L for checking, cleaning and refreshing of electric connections of street lights/solar light panel with over head conductor/pole mounted panel box including greasing of terminals to avoid sulphatic deposition and make serviceable the light fittings, taking down of lights fittings for repair and refixing in same or other location of any type and capacity (street/flood/post top/Highmast light) in Tech area/admin area/G-block (i.e. all sites of 54 ASP) complete all as specified and as directed by Engr-in-Charge. (Note:(a) Payment shall be made w.r.t. docket number of complaint. (b) Taking down & refixing of Each light under complaint shall be measured once only and number of complaints in one complaint slip shall be measured seperately. (c) Any major repair to street light shall be measured and paid seperately. (d) Street light complaints shall be attended within 48 hours otherwise penal recovery of Rs100/- per complaint per day shall be charged from your RAR/FB).

Supply and fixing in replacement new generation energy saving environemental friendly long life LED street light made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics , IP66 protection and impact of capacity 70 Watt complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat Part No. ENDURACITYLINERNEOSL70WLED757PASYBOTG or equivalent out of makes specified in list of make.

Supply and fixing in replacement new generation energyNew generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover.TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device capacity 120 Watt complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat Part No ENDURAPEARLMAGSL 120WLED757PASYTOTGASTHO or equivalent out of makes specified in list of make.

Supply and fixing in replacement Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light with highly efficient LEDs as light source, suitable for highlighting architectural features or retail spaces new generation energy saving environemental friendly long life exclusive innovative die cast aluminium IP65 of 200 Watt complete all as specified and directed by Engineer-in-Charge. Make: Havells Cat Part No. JETAVALOURFL200WLED 757PINTNBLTG or equivalent out of makes specified in list of make.

Supply and fixing in replacement energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium flood light with high power LEDs as light source, suitable for highlighting architectural features or Area Lighting. Also suitable to rough services/installations of capacity 50 Watt complete all as specified and directed by Engineer-in-charge. Make Havells Cat Part No JETAQUANTOPLUSFLP50 WLED757SYMLENS or equivalent out of makes specified in list of make.

Supply and fixing in replacement new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source of LED Capacity 25 Watt complete all as specified and directed by Engineer-in-charge. Make: Halonix Cat Part No HLPT-03-25-CW or equivalent out of makes specified in list of make.

Supply and fixing in replacement of new generation, energy saving, environmental friendly, Bollard long life aesthetically designed die-cast aluminium landscape luminaire for downward lighting with high power LED of capacity 16Watt as light source. Make Havells cat Part No MUSHROOMBL16WLED757SSYMTOPC or equivalent out of makes specified in list of make. Note: necessary foundation for fixing is included in the rate)

Supply and fixing in replacement of new generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power Bollard LED extruded housing with glare free opal diffuser IP 65 of capacity 10 Watt as light source.Make Halonix cat Part No HLOB-02-10-CW or equivalent out of makes specified in list of make. Note: necessary foundation for fixing is included in the rate)

Replacement old/burnt LED light driver suitable for LED Street light fitting of capacity 30/45/60/120 watt with existing make or equivalent out of makes specified in list of make. complete all as specified and directed by Engr-in-Charge.

Replacement old/burnt LED light driver suitable for LED Flood light fitting of capacity upto 50/60/120/200 watt with existing make or equivalent out of makes specified in list of make complete all as specified and directed by Engr-in-Charge

S&F in replacement street light bracket bend to shape made out of 25 mm dia medium grade GI pipe 1.2 mtr long including MS work such as clamps , nuts , bolts and washers fixing on pole complete all as specified and directed by Engr-in-Charge. Make of pipe Jindal/Tata/Parkash.

M&L for preparation of old painted surface of pole of less than 6mtr by removing all dirt, dust etc and apply paint with good finishing complete all as specified and directed.

M&L for preparation of old painted surface of electric steel pole by removing all dirt, dust etc and apply one coat of aluminium paint on complete steel surface including cross arm and writing of identification No , etc complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 Core complete all as specified and directed. Make: Havells/Polycab/Gloster or equivalent out of make specified.

S&F in replacement XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm 3.5 Core complete all as specified and directed. Make: Havells/Polycab/Gloster or equivalent out of make specified.

S&F in replacement XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 4 Core complete all as specified and directed. Make: Havells/Polycab/Gloster or equivalent out of make specified.

Supplying and fixing including connection with over head line, street light or as directed 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC sheathed in service connections of size 6 sqmm stranded conductor 1 twin core cable flat or circular of approved make as specified and directed by Engr-in-charge.

S& F PVC insulated & sheathed copper flexible cable black as per IS 694 1.5Sqmm, 2core (FR) flame retardant as specified and directed by Engr-in-charge. Make:- Finolex/polycab/Havells or equivalent out of make specified.

S& F PVC insulated & sheathed copper flexible cable black as per IS 694 2.5Sqmm, 2core (FR) flame retardant as specified and directed by Engr-in-charge. Make:- Finolex/polycab/Havells or equivalent out of make specified.

M&L complete for drilling hole through machine under hard standing /road in different location as per site requirement (between 03 mtr to 40mtr maximum) for laying of pipe for protection of cable etc by means of bookle and without disturbing the top surface and making good the disturbed surface if any complete all as specified.

Excavating in trenches n exc. 1.5 m wide and n. exc 1.5 m in depth, foundation etc for shafts, well, cesspits , manholes, pier holes etc n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed by Engineer-in-Charge.

Material and labour for Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm complete all as specified and directed by Engineer-in-Charge.

Removing excavated material n.exc 50 M and depositing where directed at a level n.exc 1.5 M above starting point complete all as specified and directed by Engineer-in-Charge.

M&L for sand cushioning in trenches for protection of LT under ground cable including punning and consolidation complete as sepecified and directed by Engr-in-Charge. Note :- Compacted / punned thickness shall be considered for the payment.

Supply and laying well burnt sub class ‘B’ bricks, locally available in trenches for protection of underground cable complete as sepecified and directed by Engr-in-Charge.

S & F in replacement of Contractor MNX 32, 240V 50/60Hz upto 500V,50/80Hz 3 Pole Make L&T Cat Part No- CS94111BOOO or equivalent out of make specified in 'List of make'.

M& L for Repair & testing of parts of Timer switch thermoplastic poly carbonate time panel shock, rust proof, impact and water proof, halogen and silicon free UV resistance with internally embeded high grade gasket panel shall be IP-65 protection type, system voltage 415 volts, 50 Hz, 4 wire complete all as specified and as directed by Engr-in-charge. (Note;- The rate also includes change of Wiring of any size in the panel. Parts required are seperately measured in the schedule)

S&F in replacement of timer switch 24 Hour Analog Time Switch (SST* - 15 min) as specified and directed by Engr-in-Charge. make Havell Cat Part No-DHTED15016 or equivalent out of make specified in 'List of make'.

S& F in replacement of MCB TPN 63Amp 4Pole,415V ,10KA as specified and directed by Engr-in-charge. Make: Havells Cat Part No: DHMGCTNF063 or equivalent out of make specified in 'List of make'.

S& F in replacement of MCB SP 06-32Amp,240V,50Hz ,10KA as specified and directed by Engr-in-charge. Make: Havells Cat Part No: DHMGCSPF006-032 or equivalent out of make specified in 'List of make'.

M&L in replacement for GI pipe light grade 40 mm dia for cable protection as specified and directed by Engr-in-charge

Taking out old steel tubler poles 9 mtr by breaking PCC foundation, and all related work and making the site well finished and Shifting of Pole to another location within 54 ASP area (i.e.Tech Area/G Block/admin area/H-block, D-camp etc) complete all as specified and as directed by Engr-in-charge.

M&L for Fixing steel tubular pole single arm type 9 M retrieved from item No 38 hereinbefore including excavation in trenches in soft/ loose soil n exc1.5 M wide and net exc 1.8 M in depth and triming the sides , boring bottom surfaces to required level, providing PCC (1:3:6) type D-2 using 40mm stone agregate in foundation, 1.5 mtr GI pipe medium grade of 40mm dia for cable protection and PCC 1:2:4 type B-1 coping of pole including neccessory frame work complete all as specified and as directed by Engr-in-charge.

S&F in replacement of outdoor type panel factory made polycarbonate 3.15mm Thickness (shock proof,rust free, corrosion free,dust proof, acid and chemical resistant,fire retardant, having high impact,made of halogen and silica free,recyclable material), UV resistant, having high grade gasket made of polyurethane,should withstand glow wire test at 650C should be flame retardant,the feeder pillar panel should be as per ERDA Certification with switchgear assemblies as per IEC 60 439-1.following tests performed and passed and satisfactory : (1) Temperature Rise (2) Dielectric properties (3) short circuit withstand current Rate peak & shor time withstand current and Rated conditional short circuit current (4) Effectiveness of protective circuits. (5) Clearance & creep age distance. (6) Mechanical operation, mounted on angle iron frame of size 40mm X40mmX6mm thick Complete with necessary PCC 1:3:6 foundation work as directed at site. Make: Universal Switch Gear Control/Advance Switch Gear/Schneider

Supply, installing, testig and commissioning factory made and tested AMF Panel 40 KVA Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system. The panel shall be dust and vermin proof, protection class (IP-54) and made of 2.00 mm ( 14SWG ) thick CRCA mild steel sheet and mild steel, Mounting Channel work made out of 75 mm ), front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. The scope of work also comprising of the following:- Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Advance/ Tricolite.

S&F in replacement of Locking box made out of MS Sheet 16 Swg of Size 300x200x100mm comprising of aluminium Bus Bar 63 Amp Duly insulated mounted on porcelen fixed in locking box with nut bolts and washers including one number MCB 6 Amp 10 KA 240 Volts for protection of street lights complete all as specified and as directed by Engr-in-charge.

Plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete for making coping of street/security pole of size 60x60x30 cm along with GI Pipe of 50mm light grade for entry/exit of cable all as specified and directed by Engr-In-charge. Note: The rate of pipe is seperately quoted in the schedule

M & L for complete servicing of spike barrier by taking out old oil and replacement with new HP oil and IS quality grease in barrier including welding work ,disposel of soil to a distance not exc 50mtr and junk acumulated arounds spikes complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of rewinding of electric motor 3000 RPM, 80 watt S.N 1015083629, Single phase oil dip motor with super enameled copper winding wire including bearing and bushes and other accessories required to make motor functional and testing on load complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of rack and pinion helical type complete unit assembly complete all as specified and directed by Engineer-in-Charge.

M&L in replacement of RF Security remote system of spike barrier complete all as specified and directed by Engineer-in-Charge. Make -Airtech or equivalent as approved.

M& L for flexible HDPE pipe of dia 40mm for entry & exit of cable all as specified and directed by Engr-in-charge

M&L for cleaning and greasing,lubrication of High Mast light lowering device and making it smooth to operate as specified and directed by Engr-in-charge

M&L for repair of gear box of High Mast light lowering device and making it smooth to operate as specified and directed by Engr-in-charge

M& L in replacemet of stainless steel AISI 316 wire rope of diameter 6mm of IS make for High Mast light complete all as specified and directed by Engr-in-charge

M&L in replacement of rewinding of electric motor 1 Hp , 415 Volt with super enameled copper winding wire including bearing and bushes and other accessories required to make motor functional and testing on load complete all as specified and directed by Engineer-in-Charge.

S&F energy efficient LED aviation warning Light made of die cast housing with dust to drawn LDR sensor IP 65 all as specified and directed by Engr-in-charge Make: Halonix/havell/crompton or equivalent out of make specified in list of make.

Notes:- The amount of Rs 75822.00/- against Schedule of Credit on Page No. 115 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

M/S PARKASH ENTERPRISES

NAVYUG VYAPARI

M/s Adhikari construction co.

M/S Anand Enterprises

Phogat Builders