GE/BAS-69/2021-22 REPAIR TO BOUNDARY WALL, GATE, PATH,DRAINS, FENCING ETC IN POCKET A AND B AT BASOLI GRN UNDER GE BASOLI

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing ,dressed stone work and precast concrete article, complete all as specified and as directed.

M & L walling of random rubble stone maronary uncoursed well bonded, bedded and solidly hearted built in CM (1 : 6) complete all as specified and as directed.

M & L walling of random rubble stone maronary( Except stone) uncoursed well bonded, bedded and solidly hearted built in CM (1 : 6) complete all as specified and as directed. NOTE:- stones obtained from demolition shall be reused as directed.

M & L brick work with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:6) complete all as specified and as directed.

M & L brick work ( Except bricks) with subclass 'B' bricks straight or curved on plan exc 6.0 mean radius built in CM (1:6) complete all as specified and as directed. NOTE:- Bricks obtained from demolition shall be reused as directed.

M&L for extra over stone walling for hammer dressing with maximum depression on face from straight edge held against dressed surface not exceeding 40mm (on granite or trap stone) to face stones and dressing of face beds and joints as specified of random rubble walling, uncoursed or brought up to courses complete all as specified. NOTE :- The dressing of stones , if required shall be ordered by GE.

M & L flush pointing to random rubble stone masonary uncoursed in CM (1:4) complete all as specified and as directed.

M & L rendering 15mm thick on stones masonry surfaces or Brick/ Concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for two coats of white wash on newly plasteredd surfaces of walls including preparation of surfaces, complete all as specified and as directed.

M & L for PCC (1:4:8) type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed.

M & L cement concrete (1:2:4) type B2 using 40mm graded stone aggregate as in drains beds and surface of channels etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B-0 using12.5mm graded stone aggregate as in coping including necessary from work, complete all as specified and as directed.

M & L rendering 15mm thick on stones masonry surfaces on Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement including taking down cement plaster complete all as specified and as directed.

M & L rendering 15mm thick on stones masonry surfaces on Brick/ Concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete as in Chajjas /Projection up to third floor including taking down cement plaster all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.

M&L for applying two coats of Apex emulsion paint as in walls/roof projection/chajjas complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate in foundations, filling and mass concrete, complete all as specified and as directed.

S&F MS works as in fencing posts and struts including cutting tops to bottom shape as directed, drilling holes notching for wire etc flat iron fillets for securing wire mesh etc including all drilling bolting riveting etc and similar works conforming to FE 290 gde E-165, complete all as specified and as directed.

S&F for refixing to existing old fencing posts and struts all as per item 18 above.

Mild steel screw bolt(machine made) with hexagonal or square heads at one end screwed the other or screwed both ends each screwed end to be fittedwith washers and one hexagonal or square nut n exc 5 cm long (5 to 10mm dia.)complete all as specified and as directed.

S&F Mild steel 10mm dia bars as in posts and struts in fencing including cutting top to shape as direct, drilling holes, notiching for wire etc incl welding, (for securing wire mash etc) incl all necessary drilling bolting or reveting,etc and similar work conforming to Fe290, complete all as specified and as directed.

Supply only chain link fencing of oblong wire mesh size 100x100mm with weight not exc 4 Kg/Sqm all as directed (Note- dia of main bar 4mm and cross bar 4mm ) complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire and fixing with MS angle iron fencing posts complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified and directed.

S & F galvanised 2 strand steel barbed wire 2.24 mm dia barded with 2mm dia bar at 75 mm spacing and straining and fixing to any type of standard rail, standard bolts including securing or tying at crossing with and provn of galvanized mild steel wire staple or steel pins (Each line of wire to be measured) including taking down old barbed wire, complete all as specified and as directed.

M&L for restraining and resecuring of steel barbed wire fencing including making good staples etc complete all as specified & directed (each line of wire to be measured separately) complete all as specified and as directed.

S & F Punched tape concentrina coil of dia of coil 600 mm ,56 loops, 2.5 mm core wire,heavy galvanised ( wire 275 GSM),tensile strength of wire 1400-1500 N/sqmm ,Streatchable length 12 mtr including securying or tying at crossing with and provision of galvanised mild steel wire ,,staples or steel pins etc comlete including taking down old concentrina coil all as specified and directed

Dismantling existing structural steel work including doors , gates and any type of angles complete all as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates ,rails ,braces .etc complete drilled for fixing of steel sheeting or other covering .Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive sttel sheeting) complete all as specified Gde Fe 410-W , complete all as specified and as directed.

S & F 0.80 mm mild steel plain black sheet in wall claddiing steel gates and similar works , cut to size holes punched including round headed screws fixed sttel framing with plain 40 mm lap joints with riveted or welded seams including bending complete all as specified and directed

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level ) complete all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4 type B-2, using 40 mm graded stone aggregate,as in subbase complete all as specified and as directed.

M&L for 50 mm thick Sand filling/cushioning as in floor, foundation including watering and consolidation complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 0f 60mm thickness with grey cement and pigment, M-35 grade complete all as specified and directed.

M&L for 50mm thick PCC (1:4:8), type D-2 using 40mm graded stone aggregates, as in sub bases of floors and pavings, complete all as specified and as directed.

M & L Chequred cement tiles with grey cement and pigment, 30cmx30cmx25mm thick set, jointed in neat cement slurry including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for Durastone / Endura heavy duty virtified tiles of size 322mmX322mmX9.5mm mm thick set jointed and pointed in neat cement slurry in floors with grey cement over 15 mm thick screed bed of CM (1:4 ) and finished ceemnt concrete surface fair & Smooth without using extra cement complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of white wash, complete all as specified and as directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coat of cement based paint, complete all as specified and as directed.

M&L for applying One coat of Apex emulsion paint as in walls/roof projection/chajjas on Old surface complete all as specified and directed.

S&F in repair Lid of PVC water tank of Capcity 500/1000 Ltr with PVC lock arrangement, complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia cut to length, bent to shape required incl crancking bending and hooping ends with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC M-20(using 20mm graded stone aggregate) in manhole cover slabs supported on walls, complete all as specified and directed.

M&L for form work to manholes cover soffit of slab n.exc 20cm thick, complete all as specified and as directed.

Amrik Construction co

KAPOOR AUTOMOBILES