Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹37.4 L+₹6,974.40 (0.19%)Rejected-Finance | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹38.0 L+₹73,451 (1.97%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹40.4 L+₹3.1 L (8.22%)Rejected-Finance 114 BARH CHONDI BARH PATNA BIHAR 803213 | PATNA | PATNA | BIHAR | 803213 | L4 | Rejected-Finance Fourth lowest amount quoted | |
| 5 | L5₹42.2 L+₹4.9 L (13.1%)Rejected-Finance MANEGAON DIWAN BADA KHAMARIA JABALPUR M P PIN 482005 | JABALPUR | MADHYA PRADESH | 482005 | L5 | Rejected-Finance Fifth lowest amount quoted |
Tender Value
Refer Docs
EMD Value
₹86,400
Closing Date
20 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Dhiraj Kumar, IDSE, EE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
As per BOQ
2022_MES_527344_1
8436/E8
Open Tender
Civil Works
Item Rate
240 days
Garrison Engineer (East) Jabalpur
D a(i) and b(i)
7 documents required · 7 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹86,400
Yes
12 Aug 2022
11 Jun 2022
22 Jul 2022
11 Jun 2022
20 Jul 2022
25 Jun 2022
11 Jun 2022 - 18 Jun 2022
60 days
Amount
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed and also included removal of surplus soil out of premises.
Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr depth n.exc 10Sqm on plan for foundation etc and getting out in hard/dense soil complete all as specified & directed.
Returning, filling in, including spreading levelling watering and well ramming in layers not exc 25cm as in soil complete all as specified and directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point with soil complete all as specified and directed.
M&L cement concrete (1:4:8) type D-2 (40 mm graded stone aggregate) as in sub base, Mass Concrete complete all as specified and directed.
M&L RCC M-25 (Design Mix) (20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc complete all as specified and directed.
M&L RCC M-25 (Design Mix) (20 mm graded stone aggregate) as in column complete all as specified and directed.
M&L RCC M-25 (Design Mix) (20 mm graded stone aggregate) as in beams, chajja etc complete all as specified and directed.
M&L RCC M-25 (20 mm graded stone aggregate) as in slabs suppoorted on walls, beams and column in floors, roof, landings, balconies, canopies, deck slab and in shevels the like complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished concrete surfaces compelte all as specified and directed.
Formwork to sides of pillars, piers, columns, square, rectangular, polygonal, circular on plan rough finished surfaces of concrete completed all as specified and directed.
Formwork to sofits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete completed all as specified and directed.
Formwork to sides and sofits of floor or roof beams, beam haunching, bressummers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc rough finished surfaces of concrete completed all as specified and directed
S&F MS TMT bars10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed confirming to Fe 500 or Fe 550.
All as per Srl Item No 14 above but 6mm to 8 mm dia.
M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified and directed.
M&L 15mm thick Renedering on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick surfaces in CM (1:4) finished surfaces even and smooth without using extra cement complete all as specified and directed.
All as per Srl Item No 18 above but 10 mm thick in CM (1:3) on ceiling complete all as specified and directed.
S&F 2nd class hard wood plain, solid, straight and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including back side painted with black japan, complete all as specified and directed.
M&L 35 mm thick 2nd class Hard wood (Factory Made) Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
M&L 35mm thick (2nd class hardwood) (Factory made ) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F factory made steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed.
All as per Srl Item No 23 above but without glazing bars.
M&L Mild steel work framed such as grills, gratings etc. with ends of bars souldered or or rivetted or forged into spikes, framed guard bars, frame works of water tanks and similar work complete all as specified and directed conforming to Fe-250 Gde-165.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L Sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane 3 mm thick complete all as specified and directed.
S&F 100mm long Butt hinges MS cold rolled (medium wight) complete all as specified and directed.
S&F 300mm long aluminium alloy anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolts of extruded section and fixed of size 125mm long complete all as specified and directed.
S&F aluminium anodised handle fabricated type of size 150 mm complete all as specified and directed.
M&L PCC (1:3:6) Type C1 using 20mm graded aggregate as in coping, bed block for hold fast complete all as specified and directed.
M&L two coats of synthetic enamel paint over new prepared steel surface over a coat of red oxide primer over 10 cm width or girth complete all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new wooden surfaces complete all as specified and directed.
M&L machine cut kota stone slab flooring 600 x 450 x 18 to 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing including 15mm thick screed bed or bedding layer of mortar in CM (1:6) complete all as specified and directed.
M&L machine cut kota stone slab as in vertical surfaces, skirting, dado 10-15 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.
M&L moorum/red bajri filling in floors or pavings laid in layers nexc 15cm thick spread levelled and rammed including watering complete all as specified and directed.
M&L 100mm thick PCC (1:4:8) type D-2 (40 mm graded stone aggregate) as in sub base, finished even and fair complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic filling of one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) complete all as specified and directed.
M&L 40mm thick cement concrete type B-1(1:2:4) (20 mm graded stone aggregate) as in floor finished even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound complete all as specified. (ISI Mark).
M&L for preparation of new plastered surfaces and and applying two coats of cement base paint over a coat of white cement primer on walls complete all as specified and directed.
M&L for three coats of white wash (lime) on newly plastered surfaces on wall including preparation of new plastered surfaces complete all as specified and directed.
M&L for three coats of white wash (lime) on newly plastered surfaces on ceiling including preparation of new plastered surfaces complete all as specified and directed.
M&L anti-termite Treatment of soil under floors using emulsion @ one litre per litre per hole, 300mm apart incl drilling and plugging 12 mm dia holes with CM 1:2 to match the existing floors complete all as specified.
M&L for anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc.in apron complete all as specified.
Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade onduit not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Note : (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Rate is inclusive of Cutting/chases of wall/floor/ceiling.
One light point controlled by one, one way switch.
One 3 pin 5 amp socket out point on the same board with other switches.
One 3 pin 5 amps socket out let point on independent board.
All as per Srl Item No 47 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.
S &F Switch piano flush type single pole one way 5 Amps.
S &F Socket out let 2 in one, 5/3 pin 5 Amps.
S &F Switch socket combination 5 Amps 5 pin flush type.
S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal.
S &F Ceiling rose, surface bakelite 65 x 50 mm three terminal.
S &F Electronic regulator 100/120 Watt step type.
S &F Lamp holder insulated body with back plate for angle holder all as specified.
S &F in repair LED tube light fittings decorative ultra slim linear fixture with extruded with heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 10 Watt, 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc with all assoceries intenallt prewired & includingconeecting up with 2 core flexible copper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75 x 75mm - 2 nos etc. Make- Philips ultron 17 Watt wall light (cool white round) or Jaquar LED Luke wall light 5 Watt, or Havells LED Streek track light 7 Watt white.
S &F in repair LED tube light fittings decorative ultra slim linear fixture with extruded with heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 24/36 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75 x 75mm - 2 nos etc. Make- Havells Higher Wattage LED Lighting fixture LHEXACP7IN1W025 (25W, 6500K), Or BAJAJ VIVA Series LED tube light BCLAB 20W, or Philips smart wiz Wi-Fi Batteb 4ft 24 W2600 Lm tunable
S & F in repair LED light fittings decorative 36/34 Watt recess mounting 2' x 2' type extruded metal/aluminium body, and electronic LED driver, connector block ect. with all accessories internal prewired & including connecting up with 2 core flexible cppper conductor cable with suitable size and mounting clamps etc. Make- Havells plano 2 x 2 grid panel 42 watt or Jaquar 24 w ultima ultra 2 x 2 high lumen panel or Philips lighting RC370B24-Watt LED Recessed full glow 2x 2 panel (cool day light, white).
S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 25 amp, flush mounting type.
Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sq mm, earth continuity conductor of size 4 Sq mm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors all as directed by Engineer-in-Charge. Notes:- (i) Two wires of 6 Sq mm and one wire of 4 Sq mm and one run of PVC conduit shall be measured as one unit.
Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sq mm, earth continuity conductor of size 2.5 Sq mm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors all as directed by Engineer-in-Charge. Notes:- (i) Two wires of 4 Sq mm and one wire of 2.5 Sq mm and one run of PVC conduit shall be measured as one unit.
MCCB DB VERTCLE TYPE made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415Volts TPN with 4 way Double door.
MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail, 240Volts SPN with 8 way Double door, IP-43-IK09 protection grade.
MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32 Amps.
MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating.
MCCB TPN 100 Amps, 415Volts, 25KA ,4 POLE.
Earthing complete with galvanized steel earth plate electrode 600mm x 600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6 mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00 mm dia up to 7.5 m, 20 mm dia medium grade GI watering pipe, G.I. protection pipe 15 mm dia up to 7.5 m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (Part-I).
Fabricate, supply & fix GI pipe bracket suitable for 10/15w security light fitting, made out of 25mm dia- 0.9m long & 2 set of clamps made out of 30 x 5mm ms flat & fixed with anchor bolt including Taking down of old unserviceable bracket.
Supply and fix in repair LED security light fitting of 40/45 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make Philips Smartbright 6500K Street light, BRP046 LED 30 CW MR S1 PSU GR, or Havells Endura citylite platinum plus street light 35W, or Bajaj BRTFG 45W street light flood light.
S & F in repair globe light 24 Watt mounted on wall energy efficient, water resistant E27 base of size 25.5 x 20.5 x 25.5 CM with 18-24 watt LED bulb with white colour all as specified and directed by Engr-in -Charge. Make Philips cat/product No 71797/46/31 24-watt mygarden wall light (white and Synthetics) or havells cat/ code No LHFOAJE1TZ1/060 (Havells floretine 1 LS wall light SS or equivalent of Jaquar. Note :-LED bulb rate will included in coated rate and in case of unavaibility of equivalent make ,specified product of mentioned Cat/Order shall approve for installation.
S&F outdoor garden bollard light, 10 Watt, IP-65, with excellent light out put through its PMMA window ensuring maximum illumination aspect in surrounding with all accessories complete all as specified and directed by Eng-in-Charge. Make - Havells Item Ccode: WWH-MOUNTBL10WLED830PSYMTOPMMA, CDL-MOUNTBL10WLED857PSYMTOPMMA or Philips Hue White Tuar Led Outdoor Lamp or Bajaj Tetris LED Bollard Light BGBOS 600 9W LED
Supply & Fix in repair 300 mm Sweep exhaust fan of size 395mm x 395 x 210mm (length x width x depth) with double ball bearing heavy duty, 230 volt, protective bird guard, robust construction, high velocity with louer complete nut, bolts as per site requirement all as directed by Engr-in-Charge. Make-Havells Ventil Air DB 300 Exhaust fan (Pista Green), or Usha 300 mm aeroclean plus metal exhaust, double ball bearing, (grey) or Bajaj Bahar 300 mm exhaust fan (Metallic grey).
S&F in repair wall mounted fans 450 mm sweep with 3 blades with three number speed setting including mounting accessories kit, 1400 rpm, all as specified and directed by Engr-in-Charge. Make-Havells V3 450 mm (silver/Black), or Orient electric 450 mm Tornado (black metal) or Usha colossue rust free aluminium blade (Red).
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core.
Unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : maesurement shall be done after puning down of sand.
Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` bricks laid dry and flat complete all as specified and as directed.
Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 50 mm dia. Make - ITC / JINDAL /ZENITH/TATA/ PRAKASH SURYA
Schedule of credit amount of Rs. Nil to be deducted during AOC
M/S BHARTI ENTERPRISES
M/S CHETAN PRAKASH GOYAL
MAA SHARDA CONSTRUCTION
M/S BHATIA CONSTRUCTIONS
LAL SINGH & SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .