Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC KHAWAS BUILDING BELOW PAIZOR STADIUM GANGTOK 737101 SIKKIM | GANGTOK | EAST DISTRICT | SIKKIM | 737101 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹35.2 L+₹3.1 L (9.76%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹35.5 L+₹3.4 L (10.7%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹35.7 L+₹3.6 L (11.1%)Rejected-Finance | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹36.3 L+₹4.2 L (13.0%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
Tender Value
₹34.9 L
EMD Value
₹69,900
Closing Date
22 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim 737102
PROVN OF TOILET BLOCK FOR JCO CLUB ADDN ALTN TO BLDG NO P 173 AND CERTAIN OTHER MINOR WORK AT NEW MIL STN UNDER GE GANGTOK
2022_MES_552324_1
8087AE8
Open Tender
Miscellaneous Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹69,900
Yes
24 Nov 2022
16 Sept 2022
25 Oct 2022
17 Sept 2022
22 Oct 2022
24 Sept 2022
60 days
Amount
Excavation in trenches n.exc 1.5 m wide and not exc 1.5 m in depth for foundation n.ext 10 sqm on plan and not exc 1.5 mtr in depth and getting out in soft / loose soil complete all as specified and as directed.
Excavation over areas, n. exc 1.5m deep and getting out in soft/loose soil for septic tank etc complete all as specified and as directed.
M&L PCC 1:3:6 Type C1 40mm graded aggregate as in foundation and mass concrete complete all as specified and as directed.
Material and Labour for precast cement concrete solid block masonry Type C1 (1:3:6) using 20 mm graded aggregate as per IS 383 exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and as directed by the Engr-in-Charge.
Returning filling in soil/back filling of retaining walls using approved earth obtained from excavtion including watering, well ramming in layers etc complete all as specified and as directed.
Removing excavated materials (soil) not exc 50 m complete all as specified and as directed.
M&L for rendering 20mm thick in cement mortar (1:4) in two layer of 10mm thick each with using WPC shall be mixed with cement mortar in finishing outer layer only as per manufacturer's instruction, on other than fair face of brick/stone masonry (external surfaces) finished surface fair and even without using extra cement complete all as specified and as directed. Note : (WPC shall be measured and paid separately as supply only)
M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick or concrete surfaces finished surface even and smooth without using extra cement complete all as specified and as directed.
M & L RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in foundation, including raft footings, foundation beams, plinth beams, bases for columns, lintel beam, cover slab etc basement slabs, under reamed piles and mass concrete incl necessary form work complete all as specified and as directed. (Note : Re-inforcement shall be measured and paid separately)
M&L mild steel bars 10mm dia & over cut to length bent to shape required, including carcking, bending spirally to proper for columns, hooking end & binding with and inch mild steel wire not less than 0.9mm dia securing with clips quality conforming to TMT bars complete all as specified and directed.
Material & labour for Mild steel TMT bars 5mm to 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required, including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wirenot less than 0.9 mm dia (annealed) or securing with clips complete all as specified & as directed.
M&L for formwork (flat) to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, Lintel, cantilevers, shelves including supports, overhangs etc also splays between floor and beam etc complete all as specified and directed.
M&L for rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats and other connecting plates conforming to Fe-290-W (Gde-E- 165) complete all as specified and as directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed by the Engr-in-Charge
Material and labour for pre cast concrete solid building block (with interlocking joints as directed) in PCC type C1 (1:3:6) ( using 20mm graded stone aggregate) with 10 cm thick and setting in wall built in CM (1:4) all as specified and directed.
S&F powder coated GI grid frame work for false ceiling comprising of the following sections for making partition of 600x600mm size fixed to walls with rawl plugs and screws and hanged to roof with and including 1.18 mm dia GI wire suspender of suitable length and buterfly clips, size of main tee shall be 23mmx 28mmx 0.30mm thick, cross tee shall be 24x 23x .30 mm thick and wall angle shall be 20mmx20mmx0.30mm thick complete all as specified and directed.
S&F for 4mm thick Non asbestos fibre cement building board (E-board) of approved texture for insulation and acoustic purpose of size 595x595 mm size fixed with staples on snap grid as in ceiling with and including dusting of surface and applying one coats of oil emulsion distemper over a coat of primer including preparation of surfaces complete all as specified and directed.
M&L Sand filling in layers under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for Hardcore of gauge n exc. 63mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to true surface complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base finished the surface fair and even without using extra cement etc complete all as specified and as directed.
M&L for plain cement concrete 25mm thick type B-0 1:2:4 (12.5 mm graded aggregate) as in sub base of floor including finish the surface even and rough to receive the top finish complete all directed by Engr-in-charge
M&L non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.11 sqm but n.exc 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointd in coloured cement to match incl 15mm thick screed bed with CM 1:6 complete all as specified and as directed.
M&L glazed ceramic coloured tiles 350x250x7mm/450x350x7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry & pointed in colour cement to match incl 10mm thick screed bed with CM 1:4 complete all as specified and as directed.
M&L for 15mm Bore steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all as specified and directed.
M&L for 20mm Bore steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete all as specified and directed.
S&F Rotational moulded polyethene water storage tanks 500 ltrs, ISI Mark, multilayer constraction (Cylindrical vertical with close top) hoisted and fixed in position all as specified and directed.
S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed compelte all as specified and directed.
S&F Gun-metal, globe or gate valves 20mm bore with iron wheel head screwed both ends for GI pipe complete all as specified and directed.
S&F 15mm bore dia angular stop cock, cast copper, fancy type, chromium plated with wall flange screwed for iron pipe or union and complete all as specified and directed
S&F two way bib tap, long body cast copper alloy, chromium plated with cructh or butterfly handle with healthfuceset, screwed down for 15mm bore GI pipe or for brass ferrule. Make : ESSCO Cat part No.SQT-512KN or equivalent.
M&L 15mm pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed.
S&F for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. Make : Prayag Cat No 323 or equivalent.
S&F vitreous China wash down water closet pan (pedestal pattern), white, with ‘P’ or ‘S’ trap, front or back inlet, including fixing bolts, PVC seat cover and including supply and making all necessary connections complete all as specified & as dirceted. [Make : ESSCO Cat part No. ECS-WHT-551PSPP or equivalent.
S&F Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern complete including provision of PCC bedding and connection to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified & as dirceted. Make : ESSCO Cat part No. ECS-WHT-453 or equivalent.
S&F 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete (excluding PVC connection pipe) complete all as specified & as dirceted. Make : ESSCO Cat part No. WHE-WHT-183L or equivalent.
S&F vitreous China urinals,half stall type ( flat back or corner wall type) 325x310x420mm including CP waste coupling, CP urinal spreader and waste pipe complete fix to wall surface etc Make : CERA (CARYS) vide cat part No S4020104
S&F Vitreous China, Wash Hand Basin, white, flat back of size 550 mm x 400 mm, including cast iron brackets of suitable size including providing 32mm dia CP waste pipe 32mm bore coupling of PTMT (half or full threaded minimum weight 45 gms) and making all necessary connections as dirceted. Make : Cera cat part No S2090101 or equivelant.
S&F 600 x 450mm looking mirror with aluminium channel frame, mounted on 6mm thick commercial plywood frame and fixed to wooden plug with chromium plated brass screws & cup washers incl glass self assembly.
S&F factory made steel ventilator with top/side hung shutter including hinges, steel peg stay complete all as specified and directed incl taking down old damaged steel ventelator
S&F 3mm thick, figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.
M&L for preparation of new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
S&F for PVC (SWR) pipes 110mm dia, single socketed, in any length with rubber ring joints fixed to wall, Floor as drainage complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) bends any radius, fixed to walls or fixed to steel gutter complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) equal or unequal junction single (Single T) complete all as specified and directed.
S&F for PVC (SWR) pipes 75mm dia, single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F for 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 110mm bore PVC (SWR) vent cowl fixed in position complete all as specified and directed
S&F 75 mm bore PVC (SWR) equal or unequal junction single (SingleT)complete all as specified and directed.
S&F for 150 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wall, laid in trenches or in floor with necessary clamps, bolts, bends, Tee etc.complete all as specified and as directed
M&L for concrete bed 1:3:6 type C-2 (40mm graded aggregate) to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed
S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
M&L for applying three coats of white wash on new plastered wall surface including preparation of new and previously untreated surfaces on wall complete all as specified and directed
M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4) including brought up to courses complete all as specified & as directed.
M&L for PCC 1:2:4 type B1 (20mm graded aggregate) as in coping, bed plates, parapet, plinth course including weathering, slightly rounded or chamfered angles and throating all as specified and as directed
M&L for applying two coat of exterior acrylic emulsion weather proof paint over a coat of primer over a coat of exterior wall care putty of required thickness as per manufacturers instruction including preparation of new surfaces of wall complete all as specified and directed
S&F mild steel butt hinges 100mm long, medium weight cold rolled
S&F extruded aluminium alloy handles 150mm long fabricated type anodised
S&F aluminium anodised barrel tower bolts 150 mm long or extruded section
S&F 250mm long aluminium anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section complete.
Surface excavation n exc 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specifed.
M&L for lacquer coated precast chequred cement concrete tiles made with grey cement and pigment of size 300 x 300 x 25 mm thick as in pavement / footpath, set and jointed in neat cement slurry and pointed with cement laid over laid over and including screed bed/bedding layer of 15mm thick in cemnt mortar (1:4) compelte all as directed.
M&L for PCC 1:3:6 type C2 (using 40 mm grade stone aggregate), 75 mm thick as in plinth protection / Path/ hardstanding finished the concrete surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu.m, getting out soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and directed.
S&F Rotational moulded polyethene water storage tanks 1000 ltrs, ISI Mark, multilayer constraction (Cylindrical vertical with close top) hoisted and fixed in position incl supply and fixing of 25mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of having weight not less than 455 gms including connection complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type C2 (using 40mm graded stone aggregate) as in hardstanding/flooring/path etc finished the concrete surfaces even and fair without using extra cement etc. complete all as specified and as directed.
Taking down cement plaste of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25 mm thick over and including 15mm thick cement screed base of CM (1:6) ,laid, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing the floor etc all as specified and as directed.
M&L for preparation of old/new plastered or unplastered surfaces of wall and applying two coats of Oil bound distemeper over one coat of 1mm thick wall care putty complete all as specified and directed.
M&L for dark/light shade vetrified tiles 8-10mm thick (Square/retangular) polished, area of each tile not exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to math the colour incl 20mm thick screed bed in cement mortar 1:6 for laying floor/roof finishes complete all as specified and directed
Dismantling old PGI/CGI sheeting of any gauge thickness including Nainital Sikkim or similar pattern roof/facia etc complete.
Dismantling of unframed timber scantling 40 Sqcm and over in section complete all as specified and directed
Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for drain surface channel etc
Dismantling wrought iron or mild steel work of any description etc complete all as directed
Taking down chowkats or frames with shutters (without taking off shutter from the frames) each area n exc 1.5 Sqm all as specified and directed.
Taking down chowkats or frames with shutters exc 1.5 Sqm and n.exc 4 Sqm (without taking off shutter from the frames) each area n exc 1.5 Sqm and refixing the same/other oprening complete all as specified and directed.
Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed
Supply only liquid water proofing compound.
M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old or untreated wooden surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.
Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sceitons of approved make conforming to IS:733 and IS:1285 fixing with dash fasterners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with requried EPD rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free straght, mitred and jointed mechanically wherever requried including cleat angle, aluminium snap beading for glazing/ panelling CP brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
M&L 2nd class hard wood as in timber scantling clean sawn and fixed unframed work etc complete all as specified and directed.
S&F of flush shutters 30 mm thick, solid core construction, with particle board core commercial type on one side and two face covered with decorative face veneer with lipping/frame to match complete all as specified and directed.
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints complete all as specified and directed.
M&L for framed work as in door or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing complete.
M&L for preparation of old steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat synthetic enamal point complete all as specified and directed
S & F in repair 5.5mm (tinted) sheet glass, ordinary quality in squares exc 0.5 sqm each pane complete all as specified and directed
S & F in repair 4mm (tinted) sheet glass, ordinary quality in squares n exc 0.5 sqm each pane complete all as specified and directed
M & L for point wiring with 1.5 Sqmm PVC isulated unsheathed single core stranded copper conductor (FRLS) cable of working voltage 1100 Volts grade conforming to IS-694 pt-I & II of 2000 drawn in and including 25 mm size PVC casing caping (Double lock) with all casing capping fittings & accessories with 1.60 mm thick pressed steel or mild steel sheet sunk box covered with 3mm thick backelite sheet fixed with brass screws & cup washers including 1.5 sqmm PVC insulated unsheathed single core stranded copper conductor (FRLS) cable as earth continuity conductor connected to main switch/ DB's or common earth dolly complete for light point/ fan point/ exhaust fan point / call bell point controlled by one switch 5/6 AMP one way complete all as specifed and directed.
All as per item No 92 here-in-before but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm size FRLS PVC insulated unsheathed multistranded copper conductor cable with 2.5 Sqmm FRLS PVC insulated unsheathed solid copper conductor as earth wire complete all as specified and directed.
S&F switch socket combination, 2 in 1 6 pin, 5/6 Amps and 15/16 Amps, multipurpose, flush, non shutter, non inter locking type, 230 volt flush type, white/ivory finish with two fixing hole including suitable gang box complete all as directed. Make : Anchor Cat No 38808/50665 or equivalent of approved make.
S &F switch piano flush button, single pole, one way, 5 amps (ISI marked) complete all as specified and directed.
Supply & fix lamp holder angular/straight insulated body, with back plate suitable for battern futtings, white/ivory finish complete all as directed.
Supply & fixing LED light fitting 1 x 18 W, 220 V AC decorative box type with dirver, holder including LED tube light connecting up with three core flexiable copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high output diffurser 2 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiable copper flexiable copper conductor cable of suitable size complete all as directed
Supply and fixing LED light fitting 1x9W/ 1x10W bulk head luminaries including LED light driver holder connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed.
Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz RPM 1200, copper winding of sweep 250mm
Supply and fixing electric water heater, storage type steel body
Supply and fix sheet metal enclosure for 4 way distribution boards (DB's) single pole and neutral, double door suitable for fixing MCBs/isolators fixed on wall surface and making good the disturbed surfaces of wall and connecting up complete all as specified and as directed.
Supply and fix MCB, SPN 32 amps, 240 volts, 'C', 10KA complete all as specified and as directed.
S&F MCB single pole 6 to 32 Amps 240 volts, 10KA rapturing capacity, C curve complete all as directed by Engineer-in-Charge
Supply and laying or fixing or passong through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with and inner sheathing of PVC tape armoured with galvanished steel wire or tape and overall PVC sheathed 4 sqmm nominal cross section in service connections
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron or steel earth lead wire 4mm dia size by means of nut/bolt and washer of galvanised iron or steel as shown in electrical plate No. 3 of SSR Part-I 2009 incl necessary excavation and earth work, GI pipe 20mm dia medium grade ISI marked for watering and GI pipe 15 mm dia medioum grade ISI marked pipe for protection of GI earth wire etc, PCC chamber with PCC (1:3:6) type c-2 precast RCC cover with reinforced cement concrete (1:2:4) type B1 (20 mm graded stone aggregate) reinforced with 8mm dia TMT bar @ 150mm c/c both way with provision of 10mm dia MS bar handle funnel, wire mesh, charcoal dust, salt etc connected to DB as indicated including testing complete
Taking down carefully the old unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) complete including fixtures and fittings such as switches, ceiling rose pendants, regulators, sockets, light fittings etc and removing materials for taking credit and making good disturbed surfaces of wall floor etc all as specified and as directed
All as per item No 92 here-in-before but for one socket outlet 3pin 5 amps independent board
All as per item No 92 here-in-before but wiring with 4 sqmm multistranded cable and earth wire with copper conductor of size 4 Sqmm for 15 amps power point
Supply and fix Modular switch 1way 6 A, 1 module 230 Volts, 50 Hz ISI marked all as specified and as directed. (Make : Havells cat No AHFSXXW101 or equivalent in list of make)
Supply and fix modular socket, 6A-2/3 pin combined 2 module 230 volts, 50 Hz, ISI marked all as specified and as directed. (Make : Havells cat No AHFKPXW065 or equivalent in list of make)
Supply and fix Modular switch 1way 16 A, 1 module 230 Volts, 50 Hz ISI marked all as specified and as directed. (Make : Havells cat No AHFSXXW161 or equivalent in list of make)
Supply and fix socket, 6A/16A-2/3 pin combined 2 module 230 volts, 50 Hz, ISI marked all as specified and as directed
Supply and fix modular bell push 6A 1 module 230 volts, 50Hz, ISI marked all as specified and as directed (Make : Havells cat No AHFSBXW101 or equivalent in list of make)
Supply and fix bell, AC, 230 volts single pole all as specified and as directed. (Make : Havells cat No RHYTHM- multitune doorbell SAP code AHOLXXW000 or equivalent in list of make
Supply and fix ceiling rose, three terminals 230 volt (ISI marked) surface bakelite suitable for batten fitting complete all as specified and as directed. (Make : Havells Cat No AHLHXCW000 or equivalent in list of make)
Supply and fix colour changing LED tube light batten 20 watts with options of 3000 K, 4000K & 6500K, all in one fixture with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexiable copper conductor cable of suitable size all as specified and as directed. (Make : Havells cat No LHEXBYPNIN1W020 or equivalent in list of make)
Supply and fixing LED wall light along with fixture, 20 watts with suitable fixing arrangements complete including 01 No LED lamp E27 cap with all accessories internally prewired and including connecting up with and including twin core twisted flexiable copper conductor cable of suitable size all as specified and as directed. (Make : Havells Cat No LHEXBYPNIN1W020 or equivalent in list of make)
Supply of fixing of GI tubing 25mm dia medium grade ISI marked laid in trenches/ under floor on ground/floor including all fittings such as elbow, union, reducer, tees, bends etc and short length complete all as specified and directed by Engr-in-charge.
S&F Gun-metal, globe or gate valves 25mm bore ISI marked with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.
M&L pipe PCC type C2 (1:3:6) using 40mm graded stone aggregates as in supporting pillar/block including necessary form work as required complete for resting GI pipe.
KAMLESH ENTERPRISE
M/S ANIL KUMAR THAKUR
DHARMINDER SINGH
KARMA TSETEN BHUTIA
BIJAY MITTAL
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .