E-Tender Notice No: IGIMS / EC/ EW/04/ 2026-27

Annexure-2 (Technical Bid Sheet)

INDIRA GANDHI INSTITUTE OF MEDICAL SCIENCES, PATNA

E-Tender Notice No: IGIMS / EC/ EW/ ….. / 2026-27 Date ….../….../2026

Name of Work :- Supply, installation, testing and commissioning of 20 Passengers (Stretcher & Passengers) Lift for G+2 New Modular OT Complex building beside mortuary area, at IGIMS, Patna-14

Owner Name :- Director, IGIMS, Patna-14 Period of Bid Validity :- 120 Days E-Tendering fee (in Rs.) :- ==> As per generated by www.eproc2.bihar.gov.in

Estimated Cost ( Rs)=> ₹35,24,170.00 (Rupees Thirty Five Lakh Twenty Four Thousand One Hundred Seventy only) EMD Amount (in Rs.) ===> ₹70,484.00 (Ruppes Seventy Thousand Four Hundred Eighty Four Only) Cost of bid Documents Amount (in Rs) ==> Rs.5000.00 (Ruppes Five Thousand only)

Time of Completion in months :- 120 Days

Name and address of the bidder

1 Non-Refundable cost of required B.O.Q. amounting to the respective Column as per NIT.

2 Refundable Earnest Money Deposit (EMD)amounting to the respective Column as per NIT.

3 Notarize copy Permanent Account Number.

4 Notarize copy of valid GST Certificate with updated challan.

5 Notarized copy of P.F and E.S.I registration Certificate with updated challan.

6 Notarize copy of Character certificate issued from Govt. Department.

7 Notarize copy of details of technical personnel available with contractor.

8 Notarized copy of Annual Turnover certificate issued from the registered Chartered Accountant for last three financial Years.

9 Design & Drawing of the lift/elevator to be supplied

10 Bar Chart Clearly mentioned about scheduled to be followed to complete this work in time.

11 Notarize copy of Valid Electrical Contractor License of the suitable class in the name of the bidder, issued from the competent government licensing authority.

12 Notarize copy of experience certificate/s of similar nature and magnitude of work carried by the Contractor in Last 5 Years in any Government Organization. i.e. SITC of Lift/elevator

13 Notarize copy of List of Tools, Plants, Machine available with the bidder for use on the respective work for which prospective bidder is submitting the tender.

14 The Bidder should submit affidavit on Rs.1000.00 non-judicial stamp declaring that participating agency/bidder has not been blacklisted, debarred, declared non-performer or expelled by Union Govt/State Govt / PSU's during the last 5 years, and in case any ambiguity is noticed in the documents submitted at any stage, we shall be entirely responsible and liable for any action as deemed fit under the law" shall be submitted by the Firm/Agency with Technical bid.

Note:- Intending bidders must enclose all required papers as per Technical Bid sheet and Financial Bid Sheet in hard copy also on or before last date of submission of Tender, failing which there tender will be declared non responsive.

Annexure-3 (Price-Bid Sheet)

INDIRA GANDHI INSTITUTE OF MEDICAL SCIENCES, PATNA

E-Tender Notice No: IGIMS / EC/ EW/….../ 2026-27

Supply, installation, testing and commissioning of 20 Passengers (Stretcher & Passengers) Lift for G+2 New Modular OT Complex building beside mortuary area, at IGIMS, Patna-14

1 Estimated Cost (In Rs.) ₹35,24,170.00 (Rupees Thirty Five Lakh Twenty Four Thousand One Hundred Seventy only)

2 Earnest Money ( in Rs) ₹70,484.00 (Ruppes Seventy Thousand Four Hundred Eighty Four Only)

3 Cost of B.O.Q. ( In RS) Rs.5,000.00 (Rupees Five Thousand only)

4 E-tendering fee (Non Refundable ) ( In Rs) As per generated by www.eproc2.bihar.gov.in

5 Time of completion ( In Days) 120 Days

6 Date &Time for obtaining BOQ (Only on www.eproc2.bihar.gov.in) As per NIT

7 Last Date & Time for uploading of complete tender Document(on www.eproc2.bihar.gov.in) As per NIT

8 Last Date & Time for submission of complete tender Document Hard copy at Director’s Office IGIMS through Regd. /speed post/courier. As per NIT

9 Date & Place of opening of Tender (Technical bid only on www.eproc2.bihar.gov.in) As per NIT

10 Date & Place of Opening of Tender (Price bid only on www.eproc2.bihar.gov.in) Date of opening of Price bid of Technically viable tender shall be intimated only through www.eproc.bihar.gov.in and on Institute web site www.igims.org

Bidders are requested to quote their minimum % rate above or below or at estimated rate for following Scedule items

Sl.No. Item Description Unit Qty. Rate Total

1 Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.l. box etc as required

a) Group A Point 6.00 782.00 4692.00

2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 2X1.5 sq. mm + 1X 1.5 sq. mm earth wire Meter 100.00 201.00 20100.00

b) 2X4 sq. mm + 1X4 sq. mm earth wire Meter 100.00 309.00 30900.00

c) 4 X 35 sq. mm + 1 X 6 sq. mm earth wire Meter 15.00 2978.00 44670.00

3 Supplying and fixing following modula'r switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required

a) 5/6 amps switch Each 2.00 82.00 164.00

b) 15/16 amps switch Each 4.00 139.00 556.00

c) 3 pin , 5/6 amps socket outlet Each 2.00 112.00 224.00

d) 6 pin, 15/16 amps socket outlet Each 4.00 183.00 732.00

4 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required Each 2.00 358.00 716.00

5 Supplying and fixing following size/ modules, Gl box along with modular base and cover plate for modular switches in recess etc as required

a) 6 Module (200mm X 75mm) Each 2.00 345.00 690.00

6 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required Each 6.00 531.00 3186.00

7 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required Each 4.00 64.00 256.00

8 Supplying and fixing batten/ angle holder including connection etc. as required Each 6.00 80.00 480.00

9 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required'

10 Supptying and fixing following rating, 24Al4L5 volts, "C" curve,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

a) 6 A to 32'A, Single pole Each 4.00 237.00 948.00

11 Supplying and fixing , following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as lncomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBS)

a) 4 way, Double door, l/C 1604, MCCB Each 1.00 12107.00 12107.00

12 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required Set 2.00 13721.00 27442.00

a) Supplying and laying 25 mm X 5 mm copper strip in 40 mm dia G.l. pipe from earth electrode, including connection with brass nut, bolt. spring, washer excavation and refilling etc. as required Meter 25.00 1628.00 40700.00

13 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

a) 12 watt LED lamp Each 6.00 239.00 1434.00

14 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required Each 3.00 521.00 1563.00

15 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required

16 Laying and fixing of one number pVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required

a) Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) Meter 95.00 109.00 10355.00

17 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 2.00 2482.00 4964.00

18 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required Each 1.00 2572.00 2572.00

19 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

Total Schedule Amount ₹ 276,982.00

Civil Schedule Items

20 Excavation in dumped stones or malba including stacking of serviveable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m disposed material to be neatly dressed. cum 25.00 292.20 7305.00

21 Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). kg 120.00 370.40 44448.00

22 ACP CLADDING

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:

a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.

b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per pecification and drawingThe item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places sqm 35.64 4477.20 159567.41

23 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. All complete. kg 400.00 144.50 57800.00

24 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete Sqm 80.00 9.70 776.00

25 Distempering with oil bound washa ble Distemper of approved brand and manufacture to give an even shade .Old work (one or more coats) Sqm 80.00 33.20 2656.00

26 Applying one coat of distemper primer of approved brand and manufacture on wall surface:Distemper primer Sqm 80.00 38.70 3096.00

27 Finishing walls with Acrylic Smooth exterior paint of required shade :

a New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 200.00 137.00 27400.00

28 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete Sqm. 20.00 81.10 1622.00

29 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:One or more coats on old work Sqm 20.00 54.30 1086.00

30 Cement plaster in course sand 12 mm cement plaster of mix:1:4(1 cement :4 coarse sand) sqm 50.00 152.90 7645.00

31 15 mm cement plaster on rough side of single or half brick wall of mix.1:4(1 cement: 4 coarse sand ) sqm 50.00 176.40 8820.00

a 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) cum 1.00 3998.10 3998.10

32 Providing and laying in position specified grade of einforced cement concrete excluding the cost of ring,shuttering,finishing and reinforcement-All work puto plinth level

a 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 1.00 4688.30 4688.30

33 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

a Thermo-Mechanically Treated bars TMTC-500-8mm dia. kg 25.00 94.50 2362.50

b Thermo-Mechanically Treated bars TMTC-500-10mm dia. kg 50.00 92.60 4630.00

34 Centring and shuttering including strutting,propping etc. and removal of form for.

a Foundations, footings, bases of columns etc. for mass concrete. sqm 5.00 211.60 1058.00

35 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ). Cum 3.24 5017.90 16258.00

36 Extra for Brick work in superstructure above plinth level upto floor V Cum 3.24 842.20 2728.73

37 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

a Hot finished welded type tubes kg 373.20 123.90 46239.48

38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 18.00 625.10 11251.80

39 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand)

40 Extra cost for carriage of Material

a Sone Sand (45 km from Koelwar) Cum 4.45 1132.90 5041.41

b Stone Aggregate Cum 7.50 2464.45 18483.38

d Difference of Cost of Bricks %o 1.98 1420.51 2812.61

e Difference of Cost of Cement tonn 3.00 234.62 703.86

f Extra cost for carriage of Extra Earth (1 km ) Cum 25.00 208.17 5204.25

Total Amount :- 471894.46

Add Cost of GST Rate Escallation (5.36%) :- 25293.54

Total Amount of SI ( Rs.):- 497188.01

Total Schedule {Electrical (A) + Civil (B)} Amount ₹ 774,170.01

I/we offer in Word % (Percentage) High / Less/Estimated rate mentioned in respect of quantity for schedule items (In words)

High/low /at estimated cost

Non Schedule Items

Bidders are requested to Quote their minimum rates for following Non schedule item

41 Supply Installation Testing & Commissioning of 20 Passengers (Stretcher & Passengers)/1360 kg capacity lift with minimum 3 openings & 3 stops, 1 m/s speed,travel height 7 meter floor display at each floor, one sides front access, gearless machine with machine room, having minimum car transparent glass door of 1200 mm X 2000 mm dimension, power operated side opening sliding door, stainless steel hairline finish car having cross flow fan & LED lights. AC 3 phase, 50 cycles, 415 volts +/- 10% etc required as per site condition. Set 1.00 0.00 0.00

Total Non- Schedule

Name of the Bidder

Address of the Bidder

Annexure-3 (Price-Bid Sheet)

INDIRA GANDHI INSTITUTE OF MEDICAL SCIENCES, PATNA

E-Tender Notice No: IGIMS / EC/ EW/….../ 2026-27

Supply, installation, testing and commissioning of 20 Passengers (Stretcher & Passengers) Lift for G+2 New Modular OT Complex building beside mortuary area, at IGIMS, Patna-14

1 Estimated Cost (In Rs.) ₹35,24,170.00 (Rupees Thirty Five Lakh Twenty Four Thousand One Hundred Seventy only)

2 Earnest Money ( in Rs) ₹70,484.00 (Ruppes Seventy Thousand Four Hundred Eighty Four Only)

3 Cost of B.O.Q. ( In RS) Rs.5,000.00 (Rupees Five Thousand only)

4 E-tendering fee (Non Refundable ) ( In Rs) As per generated by www.eproc2.bihar.gov.in

5 Time of completion ( In Days) 120 Days

6 Date &Time for obtaining BOQ (Only on www.eproc2.bihar.gov.in) As per NIT

7 Last Date & Time for uploading of complete tender Document(on www.eproc2.bihar.gov.in) As per NIT

8 Last Date & Time for submission of complete tender Document Hard copy at Director’s Office IGIMS through Regd. /speed post/courier. As per NIT

9 Date & Place of opening of Tender (Technical bid only on www.eproc2.bihar.gov.in) As per NIT

10 Date & Place of Opening of Tender (Price bid only on www.eproc2.bihar.gov.in) Date of opening of Price bid of Technically viable tender shall be intimated only through www.eproc.bihar.gov.in and on Institute web site www.igims.org

Bidders are requested to quote their minimum % rate above or below or at estimated rate for following Scedule items

Sl.No. Item Description Unit Qty. Rate Total

1 Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch , modular plate, suitable size G.l. box etc as required

a) Group A Point 6.00 782.00 4692.00

2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

a) 2X1.5 sq. mm + 1X 1.5 sq. mm earth wire Meter 100.00 201.00 20100.00

b) 2X4 sq. mm + 1X4 sq. mm earth wire Meter 100.00 309.00 30900.00

c) 4 X 35 sq. mm + 1 X 6 sq. mm earth wire Meter 15.00 2978.00 44670.00

3 Supplying and fixing following modula'r switch/ socket on the existing modular plate & switch box including connections but excluding modular plate.etc. as required

a) 5/6 amps switch Each 2.00 82.00 164.00

b) 15/16 amps switch Each 4.00 139.00 556.00

c) 3 pin , 5/6 amps socket outlet Each 2.00 112.00 224.00

d) 6 pin, 15/16 amps socket outlet Each 4.00 183.00 732.00

4 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/,switch box including connections but excluding modular plate etc. as required Each 2.00 358.00 716.00

5 Supplying and fixing following size/ modules, Gl box along with modular base and cover plate for modular switches in recess etc as required

a) 6 Module (200mm X 75mm) Each 2.00 345.00 690.00

6 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required Each 6.00 531.00 3186.00

7 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required Each 4.00 64.00 256.00

8 Supplying and fixing batten/ angle holder including connection etc. as required Each 6.00 80.00 480.00

9 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required'

10 Supptying and fixing following rating, 24Al4L5 volts, "C" curve,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

a) 6 A to 32'A, Single pole Each 4.00 237.00 948.00

11 Supplying and fixing , following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as lncomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBS)

a) 4 way, Double door, l/C 1604, MCCB Each 1.00 12107.00 12107.00

12 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required Set 2.00 13721.00 27442.00

a) Supplying and laying 25 mm X 5 mm copper strip in 40 mm dia G.l. pipe from earth electrode, including connection with brass nut, bolt. spring, washer excavation and refilling etc. as required Meter 25.00 1628.00 40700.00

13 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

a) 12 watt LED lamp Each 6.00 239.00 1434.00

14 Supplying and fixing 4'X18 wat[ LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required Each 3.00 521.00 1563.00

15 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required

16 Laying and fixing of one number pVC insulated and pVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required

a) Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) Meter 95.00 109.00 10355.00

17 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 270 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. Each 2.00 2482.00 4964.00

18 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required Each 1.00 2572.00 2572.00

19 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required

Total Schedule Amount ₹ 276,982.00

Civil Schedule Items

20 Excavation in dumped stones or malba including stacking of serviveable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m disposed material to be neatly dressed. cum 25.00 292.20 7305.00

21 Providing and supplying aluminium extruded tubular and other aluminium sections as per the rchitectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS74,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). kg 120.00 370.40 44448.00

22 ACP CLADDING

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:

a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.

b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per pecification and drawingThe item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places sqm 35.64 4477.20 159567.41

23 Providing and fixing M.S. grills of requirement pattern in frames of windows etc. with M.S. flats, square or round bars etc. All complete. kg 400.00 144.50 57800.00

24 Removing dry or oil bound distemper by scrapping, sand paper and preparing the surface smooth including necessary repari scratches tec. Gmplete Sqm 80.00 9.70 776.00

25 Distempering with oil bound washa ble Distemper of approved brand and manufacture to give an even shade .Old work (one or more coats) Sqm 80.00 33.20 2656.00

26 Applying one coat of distemper primer of approved brand and manufacture on wall surface:Distemper primer Sqm 80.00 38.70 3096.00

27 Finishing walls with Acrylic Smooth exterior paint of required shade :

a New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) sqm 200.00 137.00 27400.00

28 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete Sqm. 20.00 81.10 1622.00

29 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:One or more coats on old work Sqm 20.00 54.30 1086.00

30 Cement plaster in course sand 12 mm cement plaster of mix:1:4(1 cement :4 coarse sand) sqm 50.00 152.90 7645.00

31 15 mm cement plaster on rough side of single or half brick wall of mix.1:4(1 cement: 4 coarse sand ) sqm 50.00 176.40 8820.00

a 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) cum 1.00 3998.10 3998.10

32 Providing and laying in position specified grade of einforced cement concrete excluding the cost of ring,shuttering,finishing and reinforcement-All work puto plinth level

a 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) cum 1.00 4688.30 4688.30

33 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

a Thermo-Mechanically Treated bars TMTC-500-8mm dia. kg 25.00 94.50 2362.50

b Thermo-Mechanically Treated bars TMTC-500-10mm dia. kg 50.00 92.60 4630.00

34 Centring and shuttering including strutting,propping etc. and removal of form for.

a Foundations, footings, bases of columns etc. for mass concrete. sqm 5.00 211.60 1058.00

35 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ). Cum 3.24 5017.90 16258.00

36 Extra for Brick work in superstructure above plinth level upto floor V Cum 3.24 842.20 2728.73

37 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

a Hot finished welded type tubes kg 373.20 123.90 46239.48

38 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm 18.00 625.10 11251.80

39 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand)

40 Extra cost for carriage of Material

a Sone Sand (45 km from Koelwar) Cum 4.45 1132.90 5041.41

b Stone Aggregate Cum 7.50 2464.45 18483.38

d Difference of Cost of Bricks %o 1.98 1420.51 2812.61

e Difference of Cost of Cement tonn 3.00 234.62 703.86

f Extra cost for carriage of Extra Earth (1 km ) Cum 25.00 208.17 5204.25

Total Amount :- 471894.46

Add Cost of GST Rate Escallation (5.36%) :- 25293.54

Total Amount of SI ( Rs.):- 497188.01

Total Schedule {Electrical (A) + Civil (B)} Amount ₹ 774,170.01

I/we offer in Word % (Percentage) High / Less/Estimated rate mentioned in respect of quantity for schedule items (In words)

High/low /at estimated cost

Non Schedule Items

Bidders are requested to Quote their minimum rates for following Non schedule item

41 Supply Installation Testing & Commissioning of 20 Passengers (Stretcher & Passengers)/1360 kg capacity lift with minimum 3 openings & 3 stops, 1 m/s speed,travel height 7 meter floor display at each floor, one sides front access, gearless machine with machine room, having minimum car transparent glass door of 1200 mm X 2000 mm dimension, power operated side opening sliding door, stainless steel hairline finish car having cross flow fan & LED lights. AC 3 phase, 50 cycles, 415 volts +/- 10% etc required as per site condition. Set 1.00 0.00 0.00

Total Non- Schedule

Name of the Bidder

Address of the Bidder