REPAIR/PAINTING OF STEEL FURNITURE ITEMS UNDER GE DIPATOLI

Amount

Almirah Steel med (FD 67/1032) S&F following components of Almirah steel med including dismantling unservicable one all as specified and and directed (a) Lock with duplicate keys (Make of Lock- LICO/RINA)

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing. (Note for steel painting : All steel surface shall be done with spray painting) (Make of Lock-LICO/RINA)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting)synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside including dents/bends complete all as specified and directed.

Almirah steel large (FD-67/1031) S & F following components of Almirah steel med including dismantling unservicable one all as specified and directed (a) Lock duplicate keys (Make of Lock-LICO/RINA)

(b) Handle 100 mm size chromium plated

(c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer.

(d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-LICO/RINA)

(f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete including dents/bends complete all as specified and directed.

Locker steel (FD-1029) S & F following components of Locker steel including dismantling unservicable one all as specified and directed. (a) Handle 100 mm size chromium plated

(b) Hasp & staple 100mm chromium plated

(c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and directed.

(e) S & F new curtain rod SS of size 20mm dia of 1.6mm wall thickness of locker steel

(f) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of synthetic enamel paint of olive green shade/Smoke Grey of approved quality both inside and outside complete including dents/bends complete all as specified and directed.

Locker steel size 1500x530x600 mm S & F following components of Locker steel including dismantling unservicable one all as specified and directed. (a) Handle 100 mm size chromium plated

(b) Lock duplicate keys (Make of Lock-LICO/RINA)

(c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer.

(d) S&F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and directed.

(e) S&F new bottom drawer duly painted of the locker bedside.

(f) S&F new curtain rod SS of size 20mm dia of 1.6mm wall thickness of locker steel

(f) Preparation of old painted steel sufaces of locker steel size 1500x530x600mm by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete including dents/bends complete all as specified and directed.

Table dining 900x 900 mm steel (FD-1009) S&F following components of Table dinning 900x900 mm steel including dismantling unservicable one all as specified and directed. (a) Leg/stiffener 25 x 25 x 1.6mm thick MS squire pipe duly welded to the frame including minor repairs to the table and painting the replaced portion.

(b) Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade including provision of 4mm thick teakwood beading all around.

(c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality.

(d) PVC shoe

Table office officer/clerk steel (FD-84/1003,1004 ) S & F following components of Table office/clerk steel including dismantling unservicable one all as specified and directed. (a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer.

(b) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of primer.

(c) Lock with duplicate keys. (Make : Lico/Rina)

(d) Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/ accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of primer/putty of Table office Officer/Clerk Steel.

(e) Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of Table office Officer Steel

(f) Top made of 18mm thick pre-laminated MDF board one side teak face including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel

(g) PVC shoe

(h) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and directed for Table office officer steel.

(j) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green/Smoke Grey shade of approved quality both inside and outside complete all as specified and directed for Table office clerk Steel.

Chair steel tubular with/ without arms (FD-75 M) S & F following components of Chair steel tubular with/ without arms made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and directed. (a) Seat frame

(b) Back frame

(c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size.

(d) MS Flat size 25 x 25 x 4mm thick welded at corner at bottom of the seat only to support and screwed with the seat .

(e) Preparation of surfaces and painting with synthetic enamel paint OG colour to chair steel tubular with/without arms including 4 Nos of PVC bushes to the bottom of the chair frame and 2 Nos of PVC caps on the top of the frame.

Table Dining 1520 x 860 x 760mm Steel (ORs) Removing of old unserrviceable top of table1520x860 x 760 mm and S & F new top made up of 18mm thick commercial plywood covered with 0.5mm thick aluminium sheet completed all as specified and directed

Preparation of old painted steel sufaces of table1520x 860 x 760mm steel by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of olive green synthetic enamel paint including fixing of four Nos of PVC shoes to each leg.

Chair Verandah (FD-256) Preparation of steel tubular frame surfaces with emery paper and applying two coats of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable 04 Nos PVC shoes to the each leg of approved quality.

Teapoy Varandah (FD-255/383) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of white synthetic enamel paint including four Nos PVC shoes.

(b) Removing old U/s table top and S/F top made of 18mm thick Comm Ply pasted with 0.9 mm white Sunmica including 4mm thick teakwood beading all around duly polished.

Chair School with hand board(FD/E6/MAP/05) Removing old U/s PVC shell and S&F New PVC Shell of Make Supreme/Ballowal Complete.

(b) Removing old U/s Hand rest and S&F New hand rest made Up of 18mm thick comm ply pasted with 0.9mm sunmica of approved shade.

(c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of black shade of approved quality.

(d) PVC shoe

Chair push Back/Tilting/Auditorium chair (a) Supply and Fix New SEAT & back (Cushion, tapestry & ply) 50mm thick cushion complete (approved quality) of different make and model including dismantling of old one complete all as specified and dircted.

(b) Supply and fix iron base plate along with spring and its accessories for push back of Chair as per suitable size and design to make original Pattern of Chair auditorium push back including dismantling of old unserviceable one complete all as specified and directed.

(c) Supply and fix new soft PU handle of existing size and design to make original Pattern of Chair auditorium push back including dismantling of old unserviceable one complete all as specified and directed.

(d)Tighetening of nut bolts/spring and fixture of existing Tip-up chair incl minor repairs like painting of plate with black paint all as specified and directed

M/s Ganavi Enterprises

Y P ANAND

M/s Ray construction

M/s R R MUKHERJEE & CO

M/s Krishna Construction Co.

M/S Bhushan Kumar Jain