Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
12 Jan 2026, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Manager FS
Admin Building, JNPA, Sheva, Navi Mumbai
Annual Maintenance Contract for two nos. of Fire Water Tenders, one no. Fire Foam Tender, one no. Multipurpose Fire Tender and one Emergency Rescue Tender for three years
2026_JNPT_892204_1
JNP/MARINE/FS/5FT-AMC/2025
Open Tender
Miscellaneous Works
Works
Jawaharlal Nehru Port Authority
Please refer Tender documents.
1 document required · 1 mandatory
₹0
Exempted
12 Jan 2026
1 Jan 2026
13 Jan 2026
1 Jan 2026
12 Jan 2026
1 Jan 2026
PRICE FORMAT
ANNUAL MAINTENANCE CONTRACT OF TWO NOS OF FIRE WATER TENDERS.
ANNUAL MAINTENANCE CONTRACT OF ONE FIRE FOAM TENDER.
ANNUAL MAINTENANCE CONTRACT OF ONE MULTIPURPOSE TENDER (MFT).
ANNUAL MAINTENANCE CONTRACT OF EMERGENCY RESCUE TENDER (ERT).
Estimated cost of spares (Lump sum) for three years on actual basis which will be fixed by JNPA at the time of tendering.
Item Rate BoQ
BoQ_Ver4.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
NUMBER #
A) CHASSIS :
Check the oil level of engine, gearbox, and differential.
Check all lights for correct operation i.e. Head lights, brake lights, Tail lights, Indicator lights, cabin lights, etc and Siren & PA System.
Inspect tyres, including spares and inner tyres of twins; remove flints etc. from treads and between twin tyres, test pressure and if necessary inflate to correct pressure, check for uncover wear.
Check and if necessary adjust fan belt.
Check road wheel nuts and spare wheel fixing tighten, if necessary.
Check free play of clutch pedal and adjust, if necessary.
Check propeller shafts, universal joint, joint nut & bolts and repair, if necessary.
Check battery, see that electrolyte level is correct, top up with distilled water, if necessary.
Check application of hand/foot brake controls, including all connections, check foot brake pedal movement. Check brake oil for leakage and repair, if necessary. Check oil level.
Examine suspension and shock absorber, including springs fixing bolts.
Check the function of various meters and switches at Dash board and repair, if necessary.
Check free function of Wiper motor. Adjust wiper arms & blades, if necessary.
Check gear box mounting bolts, tighten, if necessary, check movement of gear level and adjust, if necessary.
Check for slackness in steering wheel and steering connections e.g. drag link and track level & repair/adjust, if necessary.
Check battery terminals, clean, tight and clean with petroleum jelly, also clean battery exterior.
Road trial of vehicle.
Check engine mountings, joints also fuel and oil water and water connections for leakage.
Oil-door and bonnet hinges catches, and window winder mechanism where possible, and repair, if necessary.
Check the fixing bolts of starter motor and tighten, if necessary check fire operation of starter.
Check the mounting of Dynamo/Alternator and tighten, if necessary.
For vehicle in daily use, oil and grease chassis. Give particular attention to swivel pins, steering linkages, from and to scar springs anchorage and shackle pins and universal joints.
Paint touch up (Inside & outside).
Check turbo charger and inter cooler leakage and lighting if necessary.
Check power steering system and hydraulic oil level in oil container.
Check hydraulic clutch pipe connection and clutch fluid level
Check cooling system and coolant level
Check and lubricate fuel injector pump linkage and check leakage and rectify if any.
Check thermostat for proper operation.
Check water trap in water separator.
Check vibrator dumper and replace if necessary.
Check fan hub and drive belt tensioner bearing .
Check and drain off condensed water from air tank
Check for proper function of engine exhaust brake valve.
Clean the fuel filters and fuel line.
Adjust foot brake of all the wheels & hand brake.
Check and lubricant exhaust brake linkage ball joint
Check clutch release bearing and grease ¾ th full cap grease and tighten by few turns.
Check distance between release bearing and clutch adjust if necessary.
Remove front hub cap fill 3/4th in full with wheel bearing grease and repeat the same.
Check break rubber hoses / air pipes for damages ,leakages and replace if necessary .
Check driver seat sliding rails and lubricate with grease.
Clean Fuel tank.
Replace oil in engine, gearbox and differential.
Clean Air Filter and replace oil, if air filters is oil bath type.
Tighten free cylinder head and adjust the tappet clearance.
Check all the nut & bolts of engine, transmission & interior chassis components.
General engine maintenance & servicing.
Complete under chassis servicing & greasing.
Complete painting with synthetic Enamel Red and epoxy, as applicable.
All four wheel nuts greasing.
Check upholstery and repair, if necessary.
Overhaul clutch master cylinder slave cylinder
Check crown wheel trust pad & adjust if necessary
Check wheel alignment and adjust if necessary
Check steering wheel play and adjust if necessary
Complete brake system overhauling with booster and valves
Overhaul brakes and clutch pedal foundation
To fix reflecting tape as per RTO norms for renewal of fitness certificate from RTO.
Contractor shall obtain the fitness certificate from RTO.
Contractor shall obtain the Road Tax exemption from RTO.
TOTAL (A)
B) SUPERSTRUCTURE :
Check fire pump mounting bolts & tighten, if necessary.
Check the mounting bolts of PTO & tighten, if necessary.
Check the propeller nuts connection between pump & PTO, repairs, if necessary
Check the primer for its operation and repair, if necessary.
Check all the valves, pipes and connection for leakage and repair, if necessary.
Check the dry test of the pump.
Take the leakage test of suction hoses.
Check the oil levels in PTO & pump and top up.
Check the operation of hose reel and repair, if necessary for leakage.
Check the operation of foam making system and repair if necessary.
Deep lift test of pump.
Check all fire fighting accessories kept on fire tender & repair, if necessary.
Dismantle pump & primer & check bearings, seals, mechanical/gland, seal of pump at the time of pump maintenance by replacing damaged parts and assemble the pump & primer.
Calibrate all the pressure gauges fitted on fire tender from the authorized agency and submit the calibration certificate
TOTAL (B)
Grand Total (A + B)
Item Rate BoQ
BoQ_Ver4.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
NUMBER #
b) SCOPE OF WORK AND PRICE FORMAT FOR ANNUAL MAINTENANCE CONTRACT OF ONE FIRE FOAM TENDER.
A) CHASSIS :
Check the oil level of engine, gearbox, and differential.
Check all lights for correct operation i.e. Head lights, brake lights, Tail lights, Indicator lights, cabin lights, etc and Siren & PA System.
Inspect tyres, including spares and inner tyres of twins; remove flints etc. from treads and between twin tyres, test pressure and if necessary inflate to correct pressure, check for uncover wear.
Check and if necessary adjust fan belt.
Check road wheel nuts and spare wheel fixing tighten, if necessary.
Check free play of clutch pedal and adjust, if necessary.
Check propeller shafts, universal joint, joint nut & bolts and repair, if necessary.
Check battery, see that electrolyte level is correct, top up with distilled water, if necessary.
Check application of hand/foot brake controls, including all connections, check foot brake pedal movement. Check brake oil for leakage and repair, if necessary. Check oil level.
Examine suspension and shock absorber, including springs fixing bolts.
Check the function of various meters and switches at Dash board and repair, if necessary.
Check free function of Wiper motor. Adjust wiper arms & blades, if necessary.
Check gear box mounting bolts, tighten, if necessary, check movement of gear level and adjust, if necessary.
Check for slackness in steering wheel and steering connections e.g. drag link and track level & repair/adjust, if necessary.
Check battery terminals, clean, tight and clean with petroleum jelly, also clean battery exterior.
Road trial of vehicle.
Check engine mountings, joints also fuel and oil water and water connections for leakage.
Oil-door and bonnet hinges catches, and window winder mechanism where possible, and repair, if necessary.
Check the fixing bolts of starter motor and tighten, if necessary check fire operation of starter.
Check the mounting of Dynamo/Alternator and tighten, if necessary.
For vehicle in daily use, oil and grease chassis. Give particular attention to swivel pins, steering linkages, from and to scar springs anchorage and shackle pins and universal joints.
Paint touch up (Inside & outside).
Check turbo charger and inter cooler leakage and lighting if necessary.
Check power steering system and hydraulic oil level in oil container.
Check hydraulic clutch pipe connection and clutch fluid level
Check cooling system and coolant level
Check and lubricate fuel injector pump linkage and check leakage and rectify if any.
Check thermostat for proper operation.
Check water trap in water separator.
Check vibrator dumper and replace if necessary.
Check fan hub and drive belt tensioner bearing .
Check and drain off condensed water from air tank
Check for proper function of engine exhaust brake valve.
Clean the fuel filters and fuel line.
Adjust foot brake of all the wheels & hand brake.
Check and lubricant exhaust brake linkage ball joint
Check clutch release bearing and grease ¾ th full cap grease and tighten by few turns.
Check distance between release bearing and clutch adjust if necessary.
Remove front hub cap fill 3/4th in full with wheel bearing grease and repeat the same.
Check break rubber hoses / air pipes for damages ,leakages and replace if necessary .
Check driver seat sliding rails and lubricate with grease.
Clean Fuel tank.
Replace oil in engine, gearbox and differential.
Clean Air Filter and replace oil, if air filters is oil bath type.
Tighten free cylinder head and adjust the tappet clearance.
Check all the nut & bolts of engine, transmission & interior chassis components.
General engine maintenance & servicing.
Complete under chassis servicing & greasing.
Complete painting with synthetic Enamel Red and epoxy, as applicable.
All four wheel nuts greasing.
Check upholstery and repair, if necessary.
Overhaul clutch master cylinder slave cylinder
Check crown wheel trust pad & adjust if necessary
Check wheel alignment and adjust if necessary
Check steering wheel play and adjust if necessary
Complete brake system overhauling with booster and valves
Overhaul brakes and clutch pedal foundation
To fix reflecting tape as per RTO norms for renewal of fitness certificate from RTO.
Contractor shall obtain the fitness certificate from RTO.
Contractor shall obtain the Road Tax exemption from RTO.
TOTAL (A)
B) SUPERSTRUCTURE :
Check fire pump mounting bolts & tighten, if necessary.
Check the mounting bolts of PTO & tighten, if necessary.
Check the propeller nuts connection between pump & PTO, repairs, if necessary
Check the primer for its operation and repair, if necessary.
Check all the valves, pipes and connection for leakage and repair, if necessary.
Check the dry test of the pump.
Take the leakage test of suction hoses.
Check the oil levels in PTO & pump and top up.
Check the operation of hose reel and repair, if necessary for leakage.
Check the operation of foam making system and repair if necessary.
Deep lift test of pump.
Check all firefighting accessories kept on fire tender & repair, if necessary.
Check the foam tank valves joints and piping connections leakages and rectify if any
Check the ladder support mounting bolts and tighten if necessary
Check water / foam monitor operation and repair if necessary.
Check water tank manhole bolts and foundation bolts and tighten if necessary.
Check and lubricate and all the valves connection on control panel and repair if necessary.
Check pressure and compound gauge and its flexible pipe repair and replace if necessary.
Check the throttle operation and repair if necessary.
Dismantle pump & primer & check bearings, seals, mechanical/gland, seal of pump at the time of pump maintenance by replacing damaged parts and assemble the pump & primer.
Calibrate all the pressure gauges fitted on fire tender from the authorized agency and submit the calibration certificate
TOTAL (B)
Grand Total (A + B)
Item Rate BoQ
BoQ_Ver4.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
NUMBER #
C) SCOPE OF WORK AND PRICE FORMAT FOR ANNUAL MAINTENANCE CONTRACT OF ONE MULTIPURPOSE FIRE TENDER (MFT).
A) CHASSIS :
Check the oil level of engine, gearbox, and differential.
Check all lights for correct operation i.e. Head lights, brake lights, Tail lights, Indicator lights, cabin lights, etc and Siren & PA System.
Inspect tyres, including spares and inner tyres of twins; remove flints etc. from treads and between twin tyres, test pressure and if necessary inflate to correct pressure, check for uncover wear.
Check and if necessary adjust fan belt.
Check road wheel nuts and spare wheel fixing tighten, if necessary.
Check free play of clutch pedal and adjust, if necessary.
Check propeller shafts, universal joint, joint nut & bolts and repair, if necessary.
Check battery, see that electrolyte level is correct, top up with distilled water, if necessary.
Check application of hand/foot brake controls, including all connections, check foot brake pedal movement. Check brake oil for leakage and repair, if necessary. Check oil level.
Examine suspension and shock absorber, including springs fixing bolts.
Check the function of various meters and switches at Dash board and repair, if necessary.
Check free function of Wiper motor. Adjust wiper arms & blades, if necessary.
Check gear box mounting bolts, tighten, if necessary, check movement of gear level and adjust, if necessary.
Check for slackness in steering wheel and steering connections e.g. drag link and track level & repair/adjust, if necessary.
Check battery terminals, clean, tight and clean with petroleum jelly, also clean battery exterior.
Road trial of vehicle.
Check engine mountings, joints also fuel and oil water and water connections for leakage.
Oil-door and bonnet hinges catches, and window winder mechanism where possible, and repair, if necessary.
Check the fixing bolts of starter motor and tighten, if necessary check fire operation of starter.
Check the mounting of Dynamo/Alternator and tighten, if necessary.
For vehicle in daily use, oil and grease chassis. Give particular attention to swivel pins, steering linkages, from and to scar springs anchorage and shackle pins and universal joints.
Paint touch up (Inside & outside).
Check turbo charger and inter cooler leakage and lighting if necessary.
Check power steering system and hydraulic oil level in oil container.
Check hydraulic clutch pipe connection and clutch fluid level
Check cooling system and coolant level
Check and lubricate fuel injector pump linkage and check leakage and rectify if any.
Check thermostat for proper operation.
Check water trap in water separator.
Check vibrator dumper and replace if necessary.
Check fan hub and drive belt tensioner bearing.
Check and drain off condensed water from air tank
Check for proper function of engine exhaust brake valve.
Clean the fuel filters and fuel line.
Adjust foot brake of all the wheels & hand brake.
Check and lubricant exhaust brake linkage ball joint
Check clutch release bearing and grease ¾ th full cap grease and tighten by few turns.
Check distance between release bearing and clutch adjust if necessary.
Remove front hub cap fill 3/4th in full with wheel bearing grease and repeat the same.
Check break rubber hoses / air pipes for damages, leakages and replace if necessary.
Check driver seat sliding rails and lubricate with grease.
Clean Fuel tank.
Replace oil in engine, gearbox and differential.
Clean Air Filter and replace oil, if air filters is oil bath type.
Tighten free cylinder head and adjust the tappet clearance.
Check all the nut & bolts of engine, transmission & interior chassis components.
General engine maintenance & servicing.
Complete under chassis servicing & greasing.
Complete painting with synthetic Enamel Red and epoxy, as applicable.
All four wheel nuts greasing.
Check upholstery and repair, if necessary.
Overhaul clutch master cylinder slave cylinder
Check crown wheel trust pad & adjust if necessary
Check wheel alignment and adjust if necessary
Check steering wheel play and adjust if necessary
Complete brake system overhauling with booster and valves
Overhaul brakes and clutch pedal foundation
To fix reflecting tape as per RTO norms for renewal of fitness certificate from RTO.
Contractor shall obtain the fitness certificate from RTO.
Contractor shall obtain the Road Tax exemption from RTO.
TOTAL (A)
B) SUPERSTRUCTURE :
Check fire pump mounting bolts & tighten, if necessary.
Check the mounting bolts of PTO & tighten, if necessary.
Check the propeller nuts connection between pump & PTO, repairs, if necessary
Check the primer for its operation and repair, if necessary.
Check all the valves, pipes and connection for leakage and repair, if necessary.
Check the dry test of the pump.
Take the leakage test of suction hoses.
Check the oil levels in PTO & pump and top up.
Check the operation of hose reel and repair, if necessary for leakage.
Check the operation of foam making system and repair if necessary.
Deep lift test of pump.
Check all firefighting accessories kept on fire tender & repair, if necessary.
Check DCP hose reel operation and repair if necessary
Check DCP tank manhole bolts and foundation bolts and tighten if necessary
Check DCP monitor operation and repair if necessary
Check CO2 hose reel for easy rotation and repair if necessary
Check CO2 and N2 cylinder mounting clamps and tighten if necessary
Check all the rubber hose pipes and removing and re-fitting if necessary
Check the foam tank valves joints and piping connections leakages and rectify if necessary
Check the ladder support mounting bolts and tighten if necessary
Check foam tank manhole bolts and foundation bolts and tighten if necessary
Check water / foam monitor operation and repair if necessary
Check water tank manhole bolts and foundation bolts and tighten if necessary
Check and lubricate all the valves connection on control panel, repair if necessary
Check pressure and compound gauge and its flexible pipe, repair and replace if necessary
Check the throttle operation and repair if necessary
Dismantle pump & primer & check bearings, seals, mechanical/gland, seal of pump at the time of pump maintenance by replacing damaged parts and assemble the pump & primer.
Nitrogen cylinder re-moving and re-fitting if necessary
CO2 cylinder re-moving and re-fitting if necessary
Check all the meters and remove and re-fitting if necessary
Re-moving and re-filling the dry chemical powder if it contents excessive moisture and caking
Calibrate all the pressure gauges fitted on fire tender from the authorized agency and submit the calibration certificate
TOTAL (B)
Grand Total (A + B)
Item Rate BoQ
BoQ_Ver4.0
Name of the Bidder/ Bidding Firm / Company :
PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)
NUMBER #
d) SCOPE OF WORK AND PRICE FORMAT FOR ANNUAL MAINTENANCE CONTRACT OF EMERGENCY RESCUE TENDER (ERT).
A) CHASSIS :
Check the oil level of engine, gearbox, and differential.
Check all lights for correct operation i.e. Head lights, brake lights, Tail lights, Indicator lights, cabin lights, etc and Siren & PA System.
Inspect tyres, including spares and inner tyres of twins; remove flints etc. from treads and between twin tyres, test pressure and if necessary inflate to correct pressure, check for uncover wear.
Check and if necessary adjust fan belt.
Check road wheel nuts and spare wheel fixing tighten, if necessary.
Check free play of clutch pedal and adjust, if necessary.
Check propeller shafts, universal joint, joint nut & bolts and repair, if necessary.
Check battery, see that electrolyte level is correct, top up with distilled water, if necessary.
Check application of hand/foot brake controls, including all connections, check foot brake pedal movement. Check brake oil for leakage and repair, if necessary. Check oil level.
Examine suspension and shock absorber, including springs fixing bolts.
Check the function of various meters and switches at Dash board and repair, if necessary.
Check free function of Wiper motor. Adjust wiper arms & blades, if necessary.
Check gear box mounting bolts, tighten, if necessary, check movement of gear level and adjust, if necessary.
Check for slackness in steering wheel and steering connections e.g. drag link and track level & repair/adjust, if necessary.
Check battery terminals, clean, tight and clean with petroleum jelly, also clean battery exterior.
Road trial of vehicle.
Check engine mountings, joints also fuel and oil water and water connections for leakage.
Oil-door and bonnet hinges catches, and window winder mechanism where possible, and repair, if necessary.
Check the fixing bolts of starter motor and tighten, if necessary check fire operation of starter.
Check the mounting of Dynamo/ Alternator and tighten, if necessary.
For vehicle in daily use, oil and grease chassis. Give particular attention to swivel pins, steering linkages, from and to scar springs anchorage and shackle pins and universal joints.
Paint touch up (Inside & outside).
Check turbo charger and inter cooler leakage and lighting if necessary.
Check power steering system and hydraulic oil level in oil container.
Check hydraulic clutch pipe connection and clutch fluid level
Check cooling system and coolant level
Check and lubricate fuel injector pump linkage and check leakage and rectify if any.
Check thermostat for proper operation.
Check water trap in water separator.
Check vibrator dumper and replace if necessary.
Check fan hub and drive belt tensioner bearing.
Check and drain off condensed water from air tank
Check for proper function of engine exhaust brake valve.
Clean the fuel filters and fuel line.
Adjust foot brake of all the wheels & hand brake.
Check and lubricant exhaust brake linkage ball joint
Check clutch release bearing and grease ¾ th full cap grease and tighten by few turns.
Check distance between release bearing and clutch adjust if necessary.
Remove front hub cap fill 3/4th in full with wheel bearing grease and repeat the same.
Check break rubber hoses / air pipes for damages, leakages and replace if necessary.
Check driver seat sliding rails and lubricate with grease.
Clean Fuel tank.
Replace oil in engine, gearbox and differential.
Clean Air Filter and replace oil, if air filters is oil bath type.
Tighten free cylinder head and adjust the tappet clearance.
Check all the nut & bolts of engine, transmission & interior chassis components.
General engine maintenance & servicing.
Complete under chassis servicing & greasing.
Complete painting with synthetic Enamel Red and epoxy, as applicable.
All four wheel nuts greasing.
Check upholstery and repair, if necessary.
Overhaul clutch master cylinder slave cylinder
Check crown wheel trust pad & adjust if necessary
Check wheel alignment and adjust if necessary
Check steering wheel play and adjust if necessary
Complete brake system overhauling with booster and valves
Overhaul brakes and clutch pedal foundation
To fix reflecting tape as per RTO norms for renewal of fitness certificate from RTO.
Contractor shall obtain the fitness certificate from RTO.
Contractor shall obtain the Road Tax exemption from RTO.
TOTAL (A)
i) SCOPE OF WORK AND PRICE FORMAT FOr rescue equipments of EMERGENCY RESCUE TENDER (ERT)
SCBA sets positive pressure ( with 04 spare cylinders)
Encapsulating Chemical Protective Suit with gloves and boot (Physical check for any damage)
First Aid Medical Outfit - for 50 persons
Blanket Woolen (in box)
Blanket, Asbestos 2 x 2 mtrs (in box)
Check B.A. Compressor and its operation
Check Portable smoke exhauster (complete with canister and collapsible duct of length 4.6 mtrs.)
Check Lifting Chain of 6 Meter 3 tonnes complete with end rings & shackles and its operation
Check Pulling & Lifting Machine, lifting or Pulling 5 tonnes complete with wire rope & hook
Check Pulling & Lifting Machine, lifting 1.5 tonnes or Pulling 3 tonnes complete with wire rope & hook and its operation
Check and Operate Chain saw- wood cutting (electrical)
a) Check and Operate Cutting Disc (Diamond spare)
b) Spare Chain
c) Chain Teeth sharping machine with accessories
Check Portable Rotary Electric Hammer Drill with spare bits. rotary Drill Bit of 300 mm long – 2 Nos.
Fire Hook
Grapnel with nylon rope of 40mm Circumferences & 30 m length
Long line 30 m size 50mm circumferences
Short line 15 m size 50mm circumference
Check Safety Belt – full body Harness with hook & rope
Hardwood Blocks, assorted from 75mm to 225mm thick
Spades
Mattocks with Handle
Pick Axe with Handle
Axes, felling
Crow Bar 1 meter long
Sledge Hammer
Hammer – 10 Kg.
Rake – 3 Prong
Check Rubber Gloves in container tested with 10,000V
Check High Safety Boots (high voltage)
Mat Rubber Large
Allen Key 105 to 10 mm – 1 set, Cutting plier heavy – 1 No Long nose pliers 7” heavy – 1 No, Hack saw with blade 12” – 1 No Tool Box – 1 No, Tin cutter – 1 No, Pincer – 1 No
Electric Tools set consisting of: Industrial plier 10” heavy – 1 No, Insulated screw driver 8” – 1 No Electrical hand gloves tested at 11 KV Electrical tester heavy – 1 No, Tool bag – 1 No Insulated tap – 1 No
Shears, bolt cutter large with insulated handle of 600mm
Shears, bolt cutter with insulated handle of 400mm
Spreader for iron railings, double screw type 125 to 175mm travel
Plastic traffic cones
Carpenter Tools Set consisting of Carpenter hand saw 24” – 1 No Carpenter chisel farshi – 1 No Carpenter try square 12” – 1 No Screw Driver 8” heavy – 1 No Cutting Plier 8” heavy – 1 No Wooden mafra file 10” – 1 No Carpenter tool box – 1 No. Chopper – 1 No.
Rechargeable torch: Ni-Cd battery with quick charging facilities with spare battery pack.
Water proof rechargeable torch
Rescue Helmet with Xenon & Led Head Lamp:
Cordoning radium type rope – 5 Meter
Full body safety harness made from Kevler for cut and heat resistance for working in any condition, EN 361
Drivers Knife
Drilling machine 230 V (With a set of drill 12 Nos.)
Steel bucket (9 liter capacity)
Propping – 20 ft. length (for propping at house collapses telescopic)
Water Proof suits (rain coat)
Rollers for moving heavy objects (6” dia x 4’)
Nylon ropes three strand Hawser laid size 50mm circumferences 30 m with breaking load 5.3 ton
Clean Gas Type Fire Extinguisher of 05 Kg.
Chokes (metal) for vehicles
Insulated plier (12” size), screw driver (14” size), fuse remover, electrical tester
Salvage sheets 12’x12’ & 6’x4’ - 1 each
Nylon Rope ladder with snap hooks of 25 m length with aluminium rounds
Parachute knot complete for lowering purpose
3 layer Fire Proximity suit (aluminumised-imported) with helmet, hood, gloves & boots.
10.5 meter aluminium extension ladder as per specification
Life Jacket foam type
Life Buoy with 30 m rope
Angle cutter (electric rescue saw) size 20 mm with diamond tip blade – 2 Nos and composite blade – 5 Nos
Night vision OWL optics binoculars
Rechargeable light for search & rescue operations
Hydraulic super spreader complete with pulling head set and chain set
Hydraulic cutter with pulling adapter and pulling chain,Tool kit with spare set of cutting blades
Concrete breaker / chipping hammer
Hydraulic combi cutter with pulling adapter and pulling chain
Hydraulic Telescopic Ram
Hydraulic power pack
Hydraulic Rescue Ram Jack
Hydraulic hand / foot pump
Single acting compact hydraulic door opener
Two stage hydraulic hand pump
Hydraulic hose reel
Portable hydraulic diamond chain saw
Self-rescue device automatic descender 32 M SS cable of 5 mm dia,
Pneumatic lifting air bags ( Working pressure 8 bar ) Quantity: 1 each : Lifting Capacity: 10 tons & 20 tons & 30 tons & 40 tons & 60 tons, accessories:- Pressure reducer 300 bar to 8 bar – 02No Dual controller with pressure gauges-01 Air hose 5 m with couplings – 02 Nos Air hose 10 m with couplings – 02 Nos Single control unit – 01 No Shut off hose with safety valve – 04 Nos Connection piece to connect two air cylinder – 02 Nos
Self-rescue automatic escape (standard size)
Shovel
Asbestos Gloves
Safety goggles
Safety belt with hook
Jumping Sheet (Jump Rescue Device 980 x 500 x 360
Victim Location Unit (Search camera) with colour LCD screen Monitor display with communication system with accessories / attachments / extension line for search in under water
Thermal Imaging Camera with LCD screen display, core /detector (uncooled micro bolometer with digital processing with AC/DC battery charger & other accessories.
Temp. Measuring Device
Ascender & Descender Device with 100 mtrs rope, ascending & locking handle with hook & rescue triangle / rescue evacuation harness with parapet wall anchor
Multi / 5 – gas detection with volatile organic compounds (VOCs).
Chain saw wood cutting (petrol driven)
Twin saw rescue universal sets.
UL approved water mist system as per NFPA : 1906 with water tank - capacity 600 ltrs.
Rescue Rocket System
Total (B)
GRAND TOTAL(A+B)
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.14 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.46 MB
BOQ_937786.xls
BOQ • 0.58 MB
Budgetory_quote.pdf
Tender Documents • 0.44 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .