REPAIR MAINTENANCE OF INTERNAL ELECTRIFICATION FITTING AND FIXTURES DISTRIBURITON BOARDS WINTER APPLIANCES AND MISC WORK AT T LINE BAKLOH AND DUNERA CANTT

Amount

Taking down carefully copper/aluminium point wiring (light ,fan,socket or power) complete fixture and fittings such as switches ,ceiling rose, regulators,sockets etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separatly) and making good disturbed surfaces of wall, floors etc.

M & L for Point wiring with copper conductor cable multistrand, PVC sheathed 1.5 Sqmm size for one light point ,fan point, exhaust fan point or bell point controlled by one switch including one run of 1.5 Sqmm multistrand PVC casing caping of approved size and quality ISI marked, (in stone/brick/block masonary) including all other required accessories as specified in preamable 1(a) to (q) of section 19 of SSR Part-II under heading 'point wiring' fixed on wall/ceiling including sunk cast iron terminal boxes grouting/flushing on wall for mounting fittings like switch,sockets etc covered with 3.00 mm thick plastic laminated sheet top cover in brick masonary/Stone masonary wall complete including cutting,chasing, pinning and making good the disturbed surface by using cement mortar 1:3 complete all as specified and directed by Engr-in-charge. (Note:-the rate for point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

All as per Srl item No 2 here in before but for one 5 amps socket out let on same board.

All as per Srl item No 2 here in before but for one 5 amps socket out let on independent board.

All as per Srl item No 2 here in before but for one light point controlled by two Nos two ways switches.

All as per srl item No 2 above but for power point 3 pin switch socket 15 Amp with PVC insulated copper conductor cable multistrand unsheathed 2.5 Sqmm on independent board including one run of 1.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in casing caping PVC of appropriate size and best quality ISI marked, (in stone/brick/block masonary) including all other required accessories as specified in preamble 1(a) to (q) of Section-19 of SSR Part-II under heading "Point wiring" fixed on wall including sunk cast iron or PVC terminal boxes for mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified and as directed.d.

Supply & Fixing Switch piano, flush button, single pole one way 6 Amps

Supply & Fixing Socket outlet 3 pin, 6 amps flush type.

Supply & Fixing Switch piano, flush button, single pole two way 6 Amps

Supply & Fixing Switch piano, flush button, single pole one way 16 amps

Supply & Fixing Socket outlet 2 in 1,3 pin 5 and 16 amps flush type.

Supply &Fixing Bell switch 5 Amps single pole one ways

Supply &Fixing electrical Bell ding dong type 230 volts Ac 50 HZ complete

Supply and fix ceiling rose 65X50 mm two to three terminals complete all as specified.

Supply and fix lamp holder for batten/angle fitting.complete all as specified and as directed

S & F Wall mounted LED integrateg batten fitting T5, 20 W LED, 4 feet, PVC extruded. Make;- Havells/Bajaj /C&S/wipro or equivalent in CG/Phillips including all accessories complete all as specified.

S & F Wall mounted LED integrateg batten fitting T5, 9/10 W LED, 2 feet, PVC extruded. Make;- Havells/Bajaj /C&S/wipro or equivalent in CG/Phillips including all accessories complete all as specified.

S & F LED lamp 10 watts CP NO:- LHLDEUHEMK8P010 of Havells or equivalent in Philips/Bajaj/Crompton/Wipro all as specified and as directed.

S & F bulk head light fitting with LED lamp 1X 9/10 Watt , complete all as specified and directed.

S & F in replacement (including taking down old fitting) LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. CAT NO. NUSNEOHE2X2R36WLED840PIRSENSOR of Make : Havells/ Bajaj/ Crompton/ Phlilips all as specified and directed.

S & F in replacement (including taking down old fitting) Energy efficient LED ceiling light 15W of size 1X1 feet complete with all accessories & fixtures CAT NO. PLUTO1X1PLR15WLED840S of Make : Havells/ Bajaj/ Crompton/ Phlilips all as specified and directed.

Supply and fixing LED building security light fitting light of 35 Watt 230 Volt , AC,outdoor type with high pressure die cast aluminium housing and heat resistant complete with IP 65/66 protection with connection of suitable size 1.5 sqmm wire complete. make:- bajaj/ Havells/Crompton etc. complete all as specified and directed.

M&L for bracket for building security light bracket made out of 32 mm dia GI light grade tubing not less than 1.5 mtr long bend to shape including pole clamps made out of 50 mm X 6 mm iron strip and nut bolts and washers complete all as specified.

Supply & laying XLPE insulated armoured heavy duty electric cable with aluminuin conductor, 1100 V grade, cross sectional area 6 Sqmm 2 core fixing on wall surface with using of suitable size clamp properly complete all as specifiedand directed by Engineer-in-Charge .

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs single door single pole and neutral with 200 amps rated bus bar of 2- way, 415 volts complete all as spd and directed.

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 4- way, 415 volts complete all as spd and directed.

Supply and fix in replacement of old unserviciable Sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar of 8- way, 240 volts complete all as spd and directed.

Supply and fixing in repair MCB Triple pole and nuetral 63Amps, 240 volts, 50 Hz Havells or equivalent Schinder, Legrand incl replacement of old u/s MCB complete all as specified and directed.

Supply and fixing MCB single pole and nuetral 6 to 40 Amps, 240 volts complete all as spd and directed. Make C&S, Havells, Legrand, L&T

Supply and fixing MCB single pole 6 to 32Amps, 240 volts all as spd and directed. Make C&S, Havells, Legrand, L&T

M&L GI pipe light grade 40 mm dia for cable protection laid in trench , under road /nalah or under floor wall etc complete all as directed by Engr-in charge.

M & L for sub main wiring with 4.0 sqmm copper conductor cable multistrand, FRPVC sheathed two run (as phase and neutral) and run 2.5 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in one PVC Casing capin wiring complete all as specified and directed by Engr-in-charge.(Note:-the rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter and making good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete).

Material and labour for Earthing complete with galvanised steel earth plate electrode 600x600x6.00mm thick burried directly in ground any type of soil including rocky soil also(earth pit not less than 2.25 Mtrs below ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to GI earth lead wire of 4.0 mm dia by means of bolts, nuts, check nuts, as earth lead complete including 40 mm bore dia protection pipe GI medium grade upto 7.5m length, watering pipe 15mm bore dia GI medium grade 1.70m length, charcoal & salt filling, necessary earth work, concrete pit, funnel removal of surplus soil upto 50m distance all as per electrical plate No.3 of SSR Part I and connected to earthing test point, main board including testing on completion all as specified and directed.

M&L for cutting/ grooving on plinth/wall/verandah in any condition for laying of cable through pipe and making good the disturbed surface by using cement concrete 1:2:4 type C-2 using 12.50mm graded stone aggregate as required complete all as specified and directed by Engr-in-charge.

Disconnecting and taking down of Geysers (water heater) of capacity 25/ 50 Ltrs horizontal/vertical of any make/model from existing position and dismentling of parts i.e.bottom plate, Top cover, water assembly thermostate, heating elements, inner tank ,glass wool,Pressure release valve, inlet and outlet valves etc.complete and reassembling and refixing in same position after descaling desludging and cleaning with suitable chemicals and materials and washing with fresh water and repair and replacment of defective/unserviceable components complete all as spaciifed and directed. Note: The rate quoted shall include the minors repairs and replacment of minor parts i.e. screw nuts, bolts washers and patch work etc .However the major components incorporated herein after shall be paid under respective items.

S&F in replacement of thermowool for air tightening as per qty required in Geysers of 50 Ltrs capacity complete all as specified and as directed.

S&F in replacement of thermowool for air tightening as per qty required in Geysers of 25 Ltrs capacity complete all as specified and as directed.

S&F in replacement of water syphon assembly with rubber gaskit tin coated suitable for 50 Ltrs Geysers all as per exisiting shape and size complete all as specified and directed

S&F in replacement of water syphon assembly with rubber gaskit tin coated suitable for 25 Ltrs Geysers all as per exisiting shape and size complete all as specified and directed

S&F in replacement of inner stainless steel container thick dully shaped and welded for 50 Ltrs Geysers complete all as specified and directed.

S&F in replacement of inner stainless steel container thick dully shaped and welded for 25 Ltrs Geysers complete all as specified and directed.

M&L for outer cover of MS sheet not less than 1.2mm thick shaped and welded dully sprey painted all as per existing geyser 50 Ltr capacity .

M&L for outer cover of MS sheet not less than 1.2mm thick shaped and welded dully sprey painted all as per existing geyser 25 Ltr capacity .

S&F in replacement of indicators red/green colour as per existing size and type complete all as specified and as directed.

S&F in replacement of Heating Element 1.5 KW 240V 50Hz ISI mark complete all as specified and as directed.Make;Venus/Pearl/CG/Bajaj

S&F in replacement of PVC connection with brass connector duly threaded internally on both ends of size 18”(45Cm) long complete all as specified and as directed.

S&F in replacement of thermostat 0 to 100 C temperature of water heater for 25/50 Ltr Capacity complete all as spacified and directed.

M&L for pressure release valve for 50/25 Ltr, geysers complete all as specified and as directed

Painting to Geyser with two coat of synthetic enamel white paint with spray gun paint complete all as specified and as directed.

Material and labour factory made sheet metal enclosure dust and vermin proof made out of 2.00mm thick Ms sheet of size 90x60x20 cm depth with double door hinged shutter and locking arrangement for fixing DBs, KWH meter etc flushed/semi flushed /grouting on wall as per site requirement including DIN rail channel mount MCB,s SP/SPN in 3 rows and provide TPN aluminium bus bar channel of rating 200 Amps duly mounted on 'F' class insulator with colour coded heat shrinkable sleeves and powder coated paint after prepration of surfaces with suitable glass vision panel complete all as directed (Note: Unit rate shall be inclusive of making good the area not exceeding 0.6 sqm and not exceeding 0.125m depth for filling the hollow existing surface with half bricks in CM (1:4) all as specified and directed by Engr-in-charge.

GOLDEN CONSTRUCTIONS

VIRAT CONSTRUCTIONS

M/S SHRI RAM BUILDERS

M/S MALHI CONSTRUCTIONS

M/S SAROOP ELECTRICAL & MECHANICAL WORKS

Eshaan Construction Co.

Ms Salaria Builders