MTPS I TM Unit II Renewal of Gasket at water box side tube nest side condensate inlet and outlet flange inspection and cleaning of tube nest and hydraulic testing of LPH 1 2 3 4 GC I II vent condenser Renewal of Gasket at Deaerator main flange

Amount

Overhauling and Gasket renewal of LP Heater 1 (a) Removing of condensate inlet and outlet pipe lines and placing it on the floor and cleaning of all flange surfaces.

b) Removing the water box and tube nest and placing it on the floor and inspection.

c) Removing the water box side flange gaskets, tube nest side, flange gasket and cleaning of tube nest and all surfaces.

d) Hydraulic testing of tube nest.

(e) Connecting the condensate inlet and outlet pipe lines of LP Heater No.1 (LHS & RHS) water box and tube nest side after providing new gaskets and tightening of all flange of LP Heater No.1 (LHS & RHS)

Overhauling and Gasket renewal of LP Heater2, 3 & 4. a) Removing of water box and placing it on the repair bay.

b) Lifting of tube nest, placing it on the T.G. floor, inspection, cleaning of tube nest, shell and etc

c) Preparation of gaskets for the tube nest, water box inlet and outlet pipe line flanges etc.

d) Providing new gaskets for the tube nest and placing the tube nest inside the shell.

e) Cleaning and checking of drip line Header Nozzle holes, Checking the tube nest for leak if any plugging of all punctured tubes, placing the water box on the tube nest and tightening of main flange, Condensate inlet and outlet flanges after providing new gaskets

Overhauling and Gasket renewal of Gland Cooler 1 &2 a) Removal of Water box, flange bolts and nuts, Condensate inlet and outlet flanges, lifting the water box, placing it on the floor and cleaning of all flange surfaces

b) Lifting of tube nest, Placing it on the floor, inspection, cleaning of tube nest and hydraulic testing etc.

c) Providing new gasket, for the tube nest and placing the tube nest inside the shell

d) Placing the water box on the tube nest and tightening the main flange, Condensate inlet and outlet flanges after providing new gasket

Renewal of Feed water tank manual gaskets, HP Heaters, Drip lines, and BFP Re-circulation lines flange gasket at Deaerator end cleaning inside the feed water tank including consumables. a) Opening of manhole cover of feed water storage tank both sides and gasket preparation for the manhole. (Tag No. Deaerator feed tank and it’s connected Drip lines, BFP’s RC line flange)

b) Inspection of trays and sampling lines and cleaning of feed water tank. (Tag No. Deaerator feed tank and it’s connected Drip lines, BFP’s RC line flange)

c) Changing of gaskets in HP Heaters drip line flanges and BFP's Re-circulation line flange at Deaerator. (Tag No. Deaerator feed tank and it’s connected Drip lines, BFP’s RC line flange)

d) Assembling of manhole covers with new gaskets after cleaning the old gaskets (Tag No. Deaerator feed tank and it’s connected Drip lines, BFP’s RC line flange)

Renewal of Deaerator main flange and connected main condensate line flange gaskets and inspection of trays. a) Removing studs and nuts in both the flanges of Deaerator header and connected main condensate line and placing it on the platform.

b) Lifting the Deaerator header and connected main condensate line and cleaning of all the surface and providing of all gaskets.

(c) Placing the gasket and Deaerator header and connected main condensate line and tightening of flanges

Overhauling and Hydraulic testing and Re-assembling of Safety valve size 6”/8”/40/64 ATA Removing the safety Relief valve size 6”, 8” / 40, 64 ATA, Disassembling the Safety Relief Valve, cleaning all the parts of the SRV, checking the seating surfaces and Lapping the seat and disc for perfect blue matching. Setting the pressure for rated lifting the SRV with hydraulic pump. Reassembling the SRV with new inlet and outlet flange gaskets. (Tag.No. HP Heater’s SRVs = 8 Nos, Deaerator SRVs – 3 Nos)

Overhauling Hydraulic test and Re- assembling of Safety valve of size 4”/2”/ 300 class. Removing the safety Relief valve Size 4’’, 2.5’’/ 339 Class from LP Heater, Gland cooler-I & Flange & Stud heating system Disassembling the Safety Relief Valve, cleaning all the parts of the SRV, checking the seating surfaces and Lapping the seat and disc for perfect blue matching. Setting the pressure for rated lifting the SRV with hydraulic pump. Reassembling the SRV with new inlet and outlet flange gaskets. (Tag No- LP Heater-2,3,4 & GC-2- 4 Nos and Flange & stud heating SRV- 4 Nos Total-8Nos)

Champion Make Style – 54 Super Non-Metallic Compressed Asbestos fiber Jointing sheet confirm to IS 2712/1998, Grade W/1, Size 2000 x 1500 x 3mm gasket for Heater drip, Auxiliary Steam Condensate Air and Auxiliary Cooling water line valves.

Consumables and T & P Charges for Item Sl.No:1 to 23

TAM AND CO (BID ID -1161652)