Tamil Nadu

Active

Works

Civil Works - Buildings

Special Repairs to VAO Office Building at Killai (South) in Chidambaram Taluk of Cuddalore District.

Public Works Department

Killai | Cuddalore, Tamil Nadu

Amount: Refer DocsCloses: 21 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published7 Oct 2026
Closes21 Oct 2026
Bid Opening22 Oct 2026

Tender Value

Refer Docs

EMD Value

₹3,350

Closing Date

21 Oct 2026, 3:00 pm

Tender Inviting Organisation

Name

Executive Engineer

Address

Executive Engineer PWD Buildings C and M Division Cuddalore

Work Description

Special Repairs to VAO Office Building at Killai (South) in Chidambaram Taluk of Cuddalore District.

Tender Information

Tender ID

2026_PWD_711529_1

Reference Number

TN6-3/2026-2027/Dt 07.10.2026

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Lump-sum

Period of Work

90 days

Location

Killai

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBoq (.xls)

RequiredPWD Registered Contractor Certificate and Live Certificate for Class V and above (.pdf)

RequiredGST Registration and GST clearance last three months (.pdf)

RequiredIncome Tax clearance certificate for last FY (.pdf)

RequiredEducation Qualification Certificate of Technical personnel and Concern letter and Aadhaar Card (.pdf)

RequiredSimilar nature of Work Experience certificate with work done value (.pdf)

RequiredTender Documents with General Conditions of Signed Contract and Tender Notice (.pdf)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹3,350

Important Dates

Last Activity

7 Oct 2026

Published

7 Oct 2026

Bid Opening

22 Oct 2026

Download Starts

7 Oct 2026

Download Ends

21 Oct 2026

Submission Starts

7 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (18 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Dismantling and Clearing away and clean removal of Cement plaster from walls etc., Complete complying with standard specification.	24.9	Sq.m	-	-
2	Dismantling, clearing away and carefully stacking materials useful for re-use of Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs etc., Complete and as directed by the departmental officers.	18.59	Sq.m	-	-
3	Dismantling, Clearing away and carefully stacking materials useful for reuse of Reinforced Cement Concrete Roof etc., Complete Complying with Standard Specifications.	3.39	Cu.m	-	-
4	Repairs to doors and window, ventilator including cost of fittings and hinges of required size and reepers etc., Completed Complying with standard specifications	7.4	Sq.m	-	-
5	Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all ﬂoors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard speciﬁcations. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Ofﬁcers. (Payment for centering shall be given after the concrete is laid).	14.2	Sq.m	-	-
6	Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all ﬂoors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard speciﬁcations. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Ofﬁcers. (Payment for centering shall be given after the concrete is laid).	28.45	Sq.m	-	-
7Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, ﬁnishing, curing, etc. and providing ﬁxtures like fan clamps in the RCC ﬂoor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. The coarse and ﬁne aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
7.01	For Superstructure in Ground floor	4.75	Cu.m	-	-
8	Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)	4.75	Qtl	-	-
9	Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick approved quality and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)	24	Sq.m	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.46 MB

Work Item Documents

3KillaiVAOTenderconditions.pdf

Tender Documents • 1.00 MB

BOQ_854833.xls

BOQ • 0.28 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Dismantling and Clearing away and clean removal of Cement plaster from walls etc., Complete complying with standard specification.

24.9

Sq.m

Dismantling, clearing away and carefully stacking materials useful for re-use of Floor finish and dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slabs etc., Complete and as directed by the departmental officers.

18.59

Sq.m

Dismantling, Clearing away and carefully stacking materials useful for reuse of Reinforced Cement Concrete Roof etc., Complete Complying with Standard Specifications.

3.39

Cu.m

Repairs to doors and window, ventilator including cost of fittings and hinges of required size and reepers etc., Completed Complying with standard specifications

7.4

Sq.m

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all ﬂoors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard speciﬁcations. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Ofﬁcers. (Payment for centering shall be given after the concrete is laid).

14.2

Sq.m

Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all ﬂoors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard speciﬁcations. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Ofﬁcers. (Payment for centering shall be given after the concrete is laid).

28.45

Sq.m

7Providing and laying in position, Standardised Concrete Mix M-25 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglm3 and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, ﬁnishing, curing, etc. and providing ﬁxtures like fan clamps in the RCC ﬂoor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. The coarse and ﬁne aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

7.01

For Superstructure in Ground floor

4.75

Cu.m

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

4.75

Qtl

Paving the Top of roof with Solar refelective ceramic tiles of size 305 x 305 x 7mm thick approved quality and colour laid in Cement mortar bed in 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with water resistant tile epoxy grout for joint, curing etc., complete complying with standard speciﬁcation and as directed by the departmental ofﬁcers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Sq.m