SPECIAL REPAIR/REPLACEMENT OF ELECTRICAL EQUIPMENTS FOR CERTAIN WARDS AND PROVN OF 60 KVA UPS FOR DIALYSIS CENTRE OF CH (CC) UNDER GE E/M LUCKNOW

Amount

Supply, installation, testing and commissioning of 60 KVA HP series medical grade online UPS system with galvanic inbuilt isolation transformer & modular assembly kit input voltage three phase, 380 volt 400 volt 415 volt -10% +20% output voltage 3 phase 380/400/415 V AC +1% SMF battery for approx 30 minute battery backup with 12 V battery, 100 AH 30 Nos, complete all as specified and directed by Engineer-in-Charge. Make :- 3EM power technology/BP/Console/UPL powers or equivalent and make of battery are Amron/Exide

Supplying ,laying or fixing , jointing and testing LT underground electric power cable crossed linked ployethylene (XLPE) insulated, galvanished steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 35 sqmm cross sectional area 3.5 core, complete all as specified laid in trenches/ laid under floor or fixed naked with walls / on poles / in ducts / in GI pipe etc with including MS Clamps, nuts, bolts, washers , complete all as specified and directed by Engineer-in-Charge.

Excavation in trenches not exc 1.5m wide and and not exc. 1.5m depth wide in soft/loose soil for laying electric cables/pipes etc including getting out excavated earth and trimming the sides and bottoms of trenches , complete all as specificed and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed by Engineer-in-Charge.

Sand cushioning to cables with a layer of sand 8 cm deep before laying the cable and 15 cm depth (punned down to 10 cm depth after laying and stretching of cable), complete all as specificed and directed by Engineer-in-Charge.Note: Punned thickness (over all 18 cm) shall be measured & paid.

Protection of cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks, complete all as specified and as directed by Engineer-in-Charge.

Mild steel galvanized tubes light grade ISI marked 50 mm bore laid in trenches / road crossing/ fixed to pole /walls/path/drain /floor etc in and including taking down old unservicable G I pipe ,compllete all as specified and as directed by Engineer-in-Charge.

Boring / drilling (Horizontly ) manually under existing road Max 10 M in width suitable for passing GI tubing 40 to 100 mm bore, complete all as specified and as directed by Engineer-in-Charge.

Earthing complete with galvanised steel plate earth electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25 meter below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to GI strip 32x6mm at two points by means of bolts and nut, check nut and washers including charcoal dust, common salt, necessary excavation in hard/dense soil, returning filling in and removal of surplus soil to a distance up to 50metres, PCC pit in 1:3:6 type CI (using 20mm grade stone aggregate) RCC 1:2:4 type B-1 (using 20mm grade stone aggregate ) 50mm thick pit cover, reinforced with 8mm dia TMT bars 75mm c/c, both ways MS handle 12mm dia, GI funnel, wire mesh and GI watering pipe of 20mm bore GI (light grade) and earth lead protection pipe 40mm bore (light grade) all as specified, directed and shown in electrical plate No 5 of SSR Part-I and testing ,including dismanteling of old unserviceable earthing , complete all as specified and as directed by Engineer-in-Charge.Note : (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point.(ii) Earth pit shall be constructed minimum 1.00 metre away from earth.

Supply, installing, commissioing and testing , split type Air Conditioner of capacity 1.5 TR with dual mode Hot & Cool, inverter type with rotary compressor (R-22 refrigerant), minimum 3 star rating, electric driven, suitable for working on 230 volts, single phase, 50 Hz supply complete including cutting of wall, providing stand for outdoor unit and making good disturbed surface of wall etc and remote operation complete and including distamntling of existing old AC carefully and deposited in AGE E/M store yard complete all as specified and directed by Engineer-in- Charge.

Supply, installing, commissioing and testing , split type Air Conditionerof capacity 1.5 TR (Dual mode Hot & Cool, inverter type) 3 star rated suitable for working on 230 volts, single phase, 50 HZ supply complete including cutting of wall, providing stand for out door unit and making good disturbed surface of wall etc and remote operation complete all as specified and directed. Make :- voltas cat part no. Voltas Inverter Split AC 173V WZJ Smart Voice AC(R32) 1.4 Ton 3 Star or eqvlnt make of from Hitachi/Carrier/ Daikin/bluestar. The rate is included for following item-: (a) Fixing the cooling unit with grouting nuts, cutting groove to wall for gas pipe & water drainage pipe (b) S&F cutting, bent to shape copper pipe of appropriate size from outdoor unit to indoor unit by cutting holes to wall including brazing the copper pipe fixing union including making good disturbed surfaces as existing. (c) S&F PVC pipe 20 mm dia transparent flexible heavy duty for water drainage pipe of upto 06 RM at site. (d) Insulation of both the copper pipes with insulating material and covering the complete pipe with PVC casing & caping of size 75 x 75 mm/reqd size for mechanical protection of copper pipe complete. (e) Charging of correct qty of refrigerant gas after necessary brazing/fixing of both the outdoor/indoor unit and testing complete on load to obtain 18 degree celsius temperature at specified amps. (f) All other connected civil work like hole cutting & other misc work reqd for installation of split AC for proper functioning as directed by EIC. (g) outdoor AC portion to be fixed on wall mounted stand as suitable for fixing of AC. (H) Plug top proviced by contractor to with AC wire.

M&L for taking down split/window type AC from various ward/department and deposting in MES store yard including transporting cost complete all as specified and directed by Engineer-in- Charge.

Sanjai sales and services

Ajanta Associates

m/s raghubar dayal

Ashirwad Contractor and Supplier