WBPWD/PW(R)/SE/SHC/NIT NO 03 OF 2026-2027(2nd-Call)

Picking up and removing old bituminous layer or sand sealing coat from old black topped surface and cleaning the exposed surface by scraping and stacking the material as directed By mechanical means (without millingmachine) : (ii) From 50 mm to 100 mm thick

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 1104 for Rural Roads of MORD including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Dismantling of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately as per Technical Specifications Clause 202 for Rural Roads of MORD. (I) By Manual Means, b) Granular Courses

Construction of Embankment with approved material obtained from borrow areas with all lifts upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of MORD. (Mode of measurement: pre work post work measurement) Carried Earth Lead=2 km

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 for Rural Roads of MORD. (Mode of measurement: pre works and post works)

Supplying, spreading and compacting Sand to required thickness, in layers not exceeding 150 mm to proper gradient and camber, inundating each layer by water and packing and ramming layer by layer to achieve desired compaction, including lighting, guarding, barricading and making adequate earthen bundh where necessary, curing with water as per direction, mending cracks and depressions by ramming wherever necessary. (Fine Sand)

Construction of granular sub-base by providing graded material, mixing in Wet Mix Plant at OMC, carriage of mixed material to work site, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory power roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants and cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) GSB Grade-II By Plant Mix Method

Construction of granular sub-base by providing graded material, mixing in Wet Mix Plant at OMC, carriage of mixed material to work site, spreading in uniform layers with Motor grader on prepared surface in proper grade and camber, compacting with vibratory power roller to achieve the desired density, including lighting, guarding, barricading, including cost of all materials, machinery, tools and plants and cost of quality control complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (ii) GSB Grade-III By Plant Mix Method

Providing, laying, spreading and compacting approved graded stone aggregates to Wet Mix Macadam (WMM) specification including screening of aggregates and granular materials, premixing the material with water at OMC in Wet Mix Plant, carriage of mixed material by tipper to site, laying in uniform layers with Paver in Sub- base / Base course on well prepared surface and compacting with Vibratory Roller to achieve the desired density, including supply of all materials, machinery, fuel and lubricants, including incidental costs for lighting, guarding, barricading, making earthen bundh to protect the edges including cost of quality control complete as per Clause 406 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).

Providing and laying Dense Bituminous Macadam (DBM) with Hot Mix Plant using crushed aggregate of specified grading, filler (cement/hydrated lime or rock dust) premixed with bituminous binder of approved grade @4.00% (min) for Grading I and 4.5% (min) for Grading II by weight of total mix as per Table 500-10and Mix design done as per Table 500-11 and job mixFormula as per clause 505.3.3 of MoRT&H - (5th Revision) including screening, cleaning of chips, transporting the hot mix to work site, laying the mixed material at specified temperature, as specified in Table 500-2 with a hydrostatic paver finisher with sensor control to the required grade. level and alignment over the prepared surface coated with tack coat, rolling with smooth wheeled and vibratory or tandem rollers with a pneumatic tyre roller of 12 to 15 tonne weight with a tyre prassure of at least 0.56 MPa to achieved the desire density as per clause 505.3.5 all including cost and carriage of bitumen, curshed aggregates, filler materials and hire charges of machinary and equiptment for construction and quality control comlete as per Clause 505 of Specification of r Roads & Bridge Works of MoRT&H (5th Revision) Using Batch Type HMP of minimum capacity 100-120 TPH 50 mm compacted thickness (Grading II)