Construction of Guest House adjacent to Electric control room near main college gate at SKIMS Medical College and Hospital Bemina Srinagar.

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil

Extra for every additional lift of 1.5m or part thereof in excavation banking excavated or stacked material of all kinds of soil.

Providing & laying of dry stone soling/boulders of required grade/size as per site requirement including watering, ramming, dressing, carriage of materials complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages, leads & lifts complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all carriages, leads & lifts complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all carriages, leads & lifts complete job.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng. shuttering, finishing and reinforcement-All work upto plinth level. 1.1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size including all carriages, leads & lifts complete job.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages, leads, lifts, head load etc. complete job.

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.

Lintel, beams, plinth beams, girgers, bressumers and cantilevers.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth /above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing & fixing mild steel anchor bolts20x450mm size complete job.

12mm cement plaster of Mix: 1:6 (:1 cement :6 coarse sand) including all leads, lifts, scafolding and carriage of materials complete job.

Providing & laying of tile profile colour coated iron sheets in roofing (26 guage) fixed with J/L hooks or screws with making PVC caps to heads of screws complete.

Providing & laying stone dust (good quality) including ramming, watering etc. and all carriages complete.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated Jor L hooks, bolts v nuts v G.I Seam bolts, nuts, G.I plain, bitumen washers complete : Ridges plain (500 - 600mm).

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand). Including all carriages, leads & lifts complete job.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand).

Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer, (having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete :

Providing & fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc complete (best make of approved quality) 75mm

Providing & fixing 10mm thick commercial Ply conforming to in walls with necessary Screws/nuts and bolts/nails fixed on wooden/steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately). 6mm thick commercial ply on back of shelves/Almirahs.

Providing & fixing 18mm thick commercial ply with necessary screws/nuts and bolts/nails including a coat of approved primer on one face and fixed on wooden/steel frame work, complete as per the directions of Engineer incharge (Frame work shall be paid for separately). Racks/Shelves 18mm thick commercial ply in shelves.

Providing & fixing 12mm thick commercial ply with necessary screws/nuts and bolts/nails including a coat of approved primer on one face and fixed on wooden/steel frame work, complete as per the directions of Engineer incharge (Frame work shall be paid for separately). Racks/Shelves 12mm thick commercial ply.

Providing & fixing decorative high pressure laminated dulmica sheet of plain gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality, including cost of adhesive of approved quality 1.00mm thick dulmica.)

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete.75mm

Providing and fixing magnetic catcher of approved quality in cupboard/wardrobe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or with dash fasteners shall be paid for separately). First class imported wood.

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 1st Class Imported wood.

Providing and fixing 30mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 1st Class Imported wood.

Providing & fixing glass panes of approved quality 4mm thick clear float glass including wooden fillet/moulded beading putty, nails, screws complete. Glass panes weighing 10 kg/sqm.

15mm cement plaster on rough side of single or half brick wall of mix 1:6 (:1 cement :6 fine sand) beams including all interior/exterior/walls/slabs/beams including all carriages, leads and lifts complete job.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :200x10mm.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x10mm.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :75x10mm.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete.125mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete.100mm

Providing & fixing aluminium Cate eye hoocks ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 150x10mm

Providing & fixing M.S rod locks with inbuilt sliding bolt including screws, nuts of heavy duty complete of approved quality with a pair of levers Godrej, Link or equivalent make). 200mm long.

Providing & fixing M.S rod locks with inbuilt sliding bolt including screws, nuts of heavy duty complete of approved quality with a pair of levers Godrej, Link or equivalent make). 275mm long.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 800x800 mm.

Providing & fixing of local Khatum band of second class kail wood 10-15mm thick as per the approved design and pattern including cornice complete job including French spirit polishing. Two or more coats on new works including a coat of wood filler.

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 18mm thick Granite of any colour or shade (Area of slab over 0.5 sqm).

Extra for providing edge moulding to 18 mm thick marble stone counters,vanities etc over item no 8.2 including machine polishing to edge to give high gloss finish etc complete as per design approved by EIC. Marble Work

Washed stone grit plaster on exterior walls of height upto 10 m above ground level in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per m2, top layer 15mm cement plaster 1:1/2 :2 (1 cement: 1/2 coarse sand : 2 stone chippings 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in -charge (payment for providing grooves shall be made separately).

Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge. 15 mm wide and 15 mm deep groove

Extra for washed grit plaster on exterior walls of height more than 10m ground level for every additional height of 3m or part thereof

Providing & fixing imported well finished (wood planks) T&G Panelling of size 125mm wide & 12mm thick fixed with wooden joists of imported wood and fixed in position with hold fast lugs or with dash fasteners of require dia and including nails, fevecol etc complete (wooden joists shall be paid for separately).

Providing wood work in frames of false ceiling, partitions etc sawn and fixed in position. 1st class imported wood.

Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 75x45x3.2 mm.

Providing and fixing aluminum hanging floor door stopper, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper.

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing & fixing 2nd class teak wood lipping/moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre laminated particle board as per directions of the Engineer in charge.

Chequerred precast cement concrete tiles 22mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) of approved quality. Ordinary cement without any pigment.

Providing & fixing wooden moulded corner beading of size 50x50mm (base and height) of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete.Second class kail wood.

Providing & fixing of flush door shutters decorative type core of block board construction with frame of 1st class imported with well matched PVC laminated veneering on both faces including cost of hinges complete (PVC membrane door 35mm thick).

Providing & fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of engineer-in-charge.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Tow or more coats on new work.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.

French spirit polishing, Two or more coats on new works including a coat of wood filler.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing & fixing wash basin with C.I brackets, 15mm dia C.P Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 550x400mm with a 15mm CP Brass single hole basin mixer.

Providing & fixing of C.P brass Trap of approved quality. 32mm dia.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 250mm.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510mm bowl depth 200mm.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing & fixing of C.P brass towel rail of approved quality. 600mm longx78mm wide.

Providing & fixing of C.P brass soap case of approved quality.

Providing & fixing of C.P brass nipples of approved quality. 15mm nominal bore, From 25mm upto 150mm length.

Providing & fixing of C.P brass health faucet complete with bracket/chain/holder 1.50metre long.

Providing & fixing toilet paper holder. C.P brass.

Providing & fixing of vertical blind curtains of any colour/pattern of superior quality with G.I channel pelmet including manual opening and closing arrangements, nails, steel screws all complete.

Providing & mixing water proofing compound with cement concrete/cement mortar as specified by manufacturer of standard make.

Providing and fixing B Class PVC pipes of standard make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive etc. 150mm.

Providing and fixing B Class PVC pipes of standard make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive etc. 100mm.

Providing and fixing B Class PVC pipes of standard make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive etc. 75mm.

Providing and fixing B Class PVC pipes of standard make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive etc. 50mm.

Providing and fixing of B-class PVC fittings/fixtures of approved make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive. Plain bend 150 mm dia.

100 mm dia.

75 mm dia.

50 mm dia.

Door bend 100 mm dia.

75 mm dia.

50 mm dia.

PVC Reducer 100mm x 75mm dia.

Door Tee 100x100x100x100x 100mm dia.

Door Tee 75x75x75x75mm dia.

Plain Tee 100 mm dia.

Plain Tee 75 mm dia.

PVC Cowl 75 mm x100mm dia.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Medium 20mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Medium 25mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) Medium 40mm dia. nominal bore.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: Medium 15mm dia. nominal bore (Internal work).

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: Medium 20mm dia. nominal bore (Internal work).

Providing and fixing uplasticized PVC connection pipe with brass unions 30 cm length. 15mm nominal bore.

Providing & fixing of CP brass long bend ISI mark and of approved quality 32mm dia. complete including removing of old existing damaged bend, repairs to floor (complete job).

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 15mm dia.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 20mm dia.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work). 25mm dia.

Providing & fixing C.P brass shower rose with 15mm or 20mm inlet.

Providing & fixing of brass ball cock with plastic ball and brass rod automatic arrangement complete with all accessories 15mm nominal bore.

Providing & fixing of C.P brass gratings heavy duty including repairing of floor complete. 100mm dia.

Providing & fixing of precast R.C.C Slab in mix M20 (manhole covers) of thickness not less than 75mm including cost of reinforcement 10mm dia both ways at rate of 75mm c/c and cost of M.S handles for lifting/placing complete job. 600mmx600mm

Providing & fixing of precast R.C.C Slab in mix M20 (manhole covers) of thickness not less than 75mm including cost of reinforcement 10mm dia both ways at rate of 75mm c/c and cost of M.S handles for lifting/placing complete job. 450mmx450mm

Providing & fixing 15mm nominal bore C.P brass angle valve for basin mixer and gyser points of approved make conforming to IS:8931.

Providing & fixing of C.P brass wall mixer Parko/Jaquar make including required fittings (heavy duty) with PVC connections including cost of C.P Cups and requisite C.P nipples.

Providing & fixing 15mm nominla bore C.P brass bib cock of approved quality (Parko/ Jaquar make).

Cutting holes upto 30x30cm in walls including making good the same. With common burnt clay (non modular) bricks.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 20mm nominal bore.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 20mm nominal bore.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25mm nominal bore.

Constructing brick masonry road gully chamber of specified size with common burnt clay(non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4coarse sand) including precast R.C.C. horizontal grating with frame complete as per standard design: Chamber size 50x45x60 cm including precast R.C.C grating with frame 500x450 mm horizontal grating.

Providing & fixing of G.I tank nipples heavy duty with Check nuts, washers complete. 15mm -20mm nominal bore.

Providing & fixing brass C.P Cups (heavy duty).

Random Rubble masonry with ~ard stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level with cement mortar 1:6 (1 Cement: 6 fine sand) including all carriages, leads, head loads and lifts complete job.

Dry random rubble masonry with hard stone in foundation and plinth Using quarry stone with bond stone including all carriages, leads, head loads and lifts etc.

providing and fixing of Master trap heavy duty of approved make for septic tank disposal including cutting of floors, walls, trenching and making good the same complete.

Supplying and fixing C.I Cover with frame for manholes, 455x610mm rectangular C.I Cover (light duty) the weight of the cover to be not less than 23kg and frame not less than 15kg complete.

Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line-

M/S BHAT SONS BUILDERS AND CONSTRUCTION WORKS

MOHAMMAD ASHRAF DAR

RIYAZ AHMAD KHAN

GULZAR AHMAD BHAT

MOHD SULTAN RATHER