Day to day maintenance of urgent nature of civil works of telecom staff quarters telecom store TE building and associated building in TE campus at Paglasthan Bongaigaon For Six months 4th Call

Amount

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.

300 mm weighing not less than 200 gms.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Single rubber stopper

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion.

(a) Single tee with door -110x110x110 mm

(b) Bend 87.5° -110 mm bend

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hardwood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

Two or more coats on new work.

Finishing walls with water proofing cement paint of required shade :

New work (Two or more coats applied @ 3.84 kg/10 sqm).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge.

With cement mortar 1:4 (1cement: 4 coarse sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Renewing glass panes, with wooden fillets wherever necessary:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Renewing glass panes and refixing existing wooden fillets:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Renewal of old putty of glass panes (length) .

Refixing old glass panes with putty and nails .

Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.

Providing and fixing white vitreous china water closet squatting pan (Indian type)

Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

White solid plastic seat with lid

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :

Flat back wash basin of size 550x400 mm.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

32 mm dia (i) Flexible pipe

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.

Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

15 mm nominal outer dia. Pipes.

20 mm nominal outer dia. Pipes.

25 mm nominal outer dia .Pipes.

40 mm nominal outer dia. Pipes.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT bib cock of approved quality and colour.

15mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT stop cock of approved quality and colour.

15 mm nominal bore, 86 mm long. Weighing not less than 88 gms.

Providing and fixing PTMT pillar cock of approved quality and colour .

15mm nominal bore, 107 mm long. Weighing not less than 110 gms.

Providing and fixing PTMT grating of approved quality and colour.

(i) Circular type. 100 mm nominal dia.

Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.

Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 30 cm length.

15 mm nominal bore with 45 cm length.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

25 mm nominal bore

40 mm nominal bore

Cleaning of chocked manhole i/c sewer line etc. and flushing with water and disposal of night soil, waist out side of municipal area all complete as per direction of E-I-C.

Uprooting of trees on exposed wall on any height upto floor V level i/c dismantling of wall /plaster etc. and after removal of root making good the wall,pouring of acid etc. all complete as per direction and satisfaction of Engineer-in-charge.

Repairing of flushing cistern i/c replacement of any unserviceable part & making good for use etc. complete as per direction & satisfaction of E/I.

Fittings and fixing PVC washer with brass nuts and washer toexisting brass Bib cock /stop cock of nominal size of 15 mm dia.complete as per direction of E-I-C.

Repair of wooden doors/ ventilator/ windows shutters of area upto 2.00 sqm by replacing damaged hinges, defective part/glass i/c style, rail and tightening of wire gauge with wooden fillets if required, cost of demolishing and refixing the shutter with necessary butt hinges and screws or welding to M.S. frame wherever reguired i/c cost of wood if required etc. complete as per direction of the E-I-C.

Labour charges for repairing of damaged aluminium door shutter /PVC shutter i/c dismembering of rails/style etc. & making good after repairing /replacement of rails, style, pannels, hinges etc. which required as per direction of E-I-C. ( cost of Aluminium /PVC section,hinges, pannels will be paid separately)

Taking out damaged PVC floor trap/PVC bend and providing and fixing new PVC floor trap/PVC bend in toilet / kitchen i/c cutting floor and making good the damages to floors as required complete , i/c disposal of rubbish to the dumping ground within 50 mtr. Lead etc. complete as per direction and satisfaction of E-I-C..

Providing and fixing oxidised M.S. casement window fastener with necessary screws etc. complete.

P/F PVC water tank cover with locking arrangement in existing water tank of suitable size etc. complete as per direction of E-I-C.

P/F PVC tank nipple in exising PVC water tank with washer etc. complete as per direction of E-I-C.

(a) 25 mm nominal size

(b) 50 mm nominal bore

Refixing of GI pipe with fittings after removing chokage and cleaning where necessary.

15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

40 mm dia nominal bore

Cleaning of PVC water storage tanks installed over ground or terrace at all heights manually with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge.

Water tank above 500 litres upto 1000 litres

Water tank above 1000 litres upto 2000 litres

Water tank above 2000 litres upto 7000 litres

Cleaning of chocked SCI soil/waist or rain water pipe i/c rexing the same withG.I. ring and sealing the joints wherever required and cost of scaffolding etc. complete as per direction of E-I-c.

Credit for:-

(a)Brass bib cock /stop cock 15 mm nominal bore

(b)C.P.Brass Pillar tap

(c)PVC Cistern

(d)Gun metal valve (i)25 mm

(e)Gun metal valve (i)40 mm