CERTAIN REPAIR TO TOILET LEAKAGE, SEEPAGE, JOINERIES, PLASTERING ETC OF MD ACCN IN SANJOG CHHETRI VIHAR IN THE AREA OF AGE BR-II UNDER GE (EAST) LUCKNOW

Amount

Taking down PVC/AC/CI/SSW 100mm/110 bore pipe drain pipes, set in cement mortar including PCC haunching and bedding, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including 25x5mm MS holding clamps, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including 25x5mm MS holding clamps, complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend, any radius complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed.

S&F for 110mm bore PVC (SWR) junction single (single T) with access door equal or unequal complete all as specified and directed.

S&F for PVC (SWR) floor trap of size 110/75mm bore plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for CP Grating of 100mm dia complete all as specified and directed.

Jointing only for 100 mm bore cast iron pipes & fittings to PVC pipes & fittings, in repairs, with epoxy based repair polymer and making joints leakproof complete all as specified and directed.

Cutting holes into or through in brick walls built in cement mortar area exc 0.15 Sqm but not exc. 0.2 Sqm & making good in cement mortar 1:3 or cement concrete (1:2:4) Type B-1 as required, complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, complete all as specified & as directed.

S&F in repair viterous china Wash Hand Basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.

S&F PVC connection of 15mm bore, 450mm long with brass coupling on both ends of superior quality complete all as specified and directed.

Taking up or down 15mm dia PVC tubing and connections including cleaning for refixing or removal to store.complete all as specified and directed.

Taking up or down 20mm dia PVC tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F for 15mm bore uPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceiling or in floors etc. complete all as specified and directed.

S&F for 20mm bore uPVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceiling or in floors etc. complete all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of following sizes by providing and fixing tee including cutting and making fusion joint etc, complete all as specified and directed.

Cutting chases, pinning in brick walls for concealed water tubing making good to facings where required and pointing in CM 1:3 cutting not exceeding 10 cm girth complete all as specified and directed.

S&F in repair long body 15 mm bore bib tap, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified & directed.

S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair complete all as specified and directed.

S&F in repair 15mm bore concealed type, stop valve cast copper alloy screwed down high pressure with capstan head and cup, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs long body15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and directed.

S&F in repairs brass spindals suitable for 15mm bore bib tap, pillar tap complete all as specified and directed.

S&F in repair 32 mm bore Brass chromium plated bottle trap for wash basins with inlet & outlet, screwed for pipe or connections including necessary packing union & cap & fixed complete all as specified and directed.

S&F in repair 32mm dia HDPE pipe for WHB, sink waste/drain pipe fixing with clamps, complete all as specified and directed.

S&F in repair 15mm bore two way bib tap chromium plated, cast copper alloy with fancy type handles screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair CP Jet with flexible tube complete all as specified and directed.

S&F 500 Litre capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including dismantling of existing water tanks complete all as specified and directed.

S&F 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete, all as specified & directed.

S&F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete, all as specified & directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed on wall with PVC rawl plug & cadmium plated brass screws, complete all as specified & directed.

S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified.

Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L of anodized aluminium snap grid size 605x605mm of frame work for false ceiling complete all as specified and directed.

S&F for E-board `Everest` or equivalent make 600 x 600 x4 mm thick white prelaminated sett embosed reinforced designer as approved ceiling board/tiles at any height complete all as specified and directed.

S & F in repairs for E-board `Everest` or equivalent make 600 x 600x4 mm thick white prelaminated sett embosed reinforced designer as approved ceiling board/tiles at any height complete all as specified and directed.

Dismantling of PGI sheets in covering complete all as specified and directed.

S & F for Pre-laminated galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ ceiling/cladding to wall, incl bending in desired shape and fixed with screws, complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.5 sqm each, complete all as specified and directed

Taking down shutters of any description exc 1.0 sqm but not exc 2.0 sqm each complete all as specified and directed

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed

S&F 105x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast (40x3mm) etc. complete all as specified and directed.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F PVC solid door frame of size 50x47mm made out of 5m plain coloured sheet reinforced with MS square tube & with wood grain printed

S&F 30mm thick PVC factory made panneled door shutter with wood grain printed & decorative beading with 10mmx10mm as per IS- 4020 made from MS tube of top and bottom rods. MS frame shall be covered with heat maulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on plain side & as gap insert for top and bottom rail. Pannelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawings.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F stainless steel butt hinges of size 100mm medium weight, complete all as specified and directed.

Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3, depth of cutting exc half brick but n. exc one brick, complete all as specified and directed.

S&F mild steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Grade E-165 (Fe 290) including necessary welding etc. and fixed in position complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads, complete, all as specified & directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area not exc 0.5 Sqm in each pane, complete, all as specified and directed.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified.including taking down ms door frame/wooden door frame including wooden beading and refing ms door shutter/wooden door shutter with new wire mesh with tinned tack/flat iron in steel door and wooden beading in wooden door for securing the wire messe and making good the disturbed portion during execution complete al as specified and directed. (including welding work appy where as required.)

M&L for Welding in repairs not exc. 2.5cm in length and thickness of metal exc 6mm but not exc 9mm complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all of quoins, arches, pillers etc.but excluding ashlar facings and precast concrete articles.

M & L for brick work using fly ash brick, non modular, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6) , complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key scrubing down with water etc all as specified and directed .

M&L for rendering 15 mm thick in cement mortar 1:6 on fair face of brick work of walls, finished even & smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair face of brick work of walls, mixed with including water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

M&L for non skid coloured ceramic edge cut tiles 7 to 8 mm thick (square/ rectanglar) area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm as in floor over and including screed bed 15mm thick in CM 1:4 or beding layer for laying floor finishes etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete, all as specified and directed.

M&L for coloured glazed ceramic edge cut tiles 450X300X7mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:3.complete all as specified and directed.

M&L for coloured glazed ceramic edge cut tiles 600X300X7mm thick but as on vertical surfaces such as skirting/dado over and including 10mm thick rendering in CM 1:3.complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint, complete, all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying one coat of oil emulsion distemper (OBD) of approved shade/tint all as specified and directed.

M/S Reliance Construction

M/S KAUSHIK CONSTRUCTION

kaushalya construction

R P construction company

QUALITY CONSTRUCTIONS CO

M/s SNS Construction

m/s raghubar dayal