WELCOME MAINT TO OFFICERS MD ACCN AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Preparation of old decorated surfaces of wall including brooming , scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of white wash on walls complete all as specified and directed.

All as per item No.1 here-in-before but on ceiling.

M&L for complete removal of old decorated surfaces of wall ncluding brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and applying two coats of oil emulsion distemper white/coloured tint over 1 mm thick of white cement based putty complete all as specified and directed.

M&L for complete removal of old decorated surface of ceiling, including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and applying one coat of oil emulsion distemper white/coloured complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and apply one coat of oil emulsion distemper complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including brooming, scraping down, smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks and applying one coat of exterior weather proof water base emulsion paint on wall complete all as specified and directed.

M&L for complete removal of old decorated surface of and applying two coats of exterior weather proof water base emulsion paint over a coat white cement based putty complete all as specified and directed.

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No.8 above but on steel surfaces.

M&L for 15mm thick rendering in two (10mm+5mm ) CM 1:4 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement and taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement and taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on fair face of brick/ concrete surfaces as in ceiling and taking down mud plaster, cement plaster on brick or stone walls/ceiling, including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of white cement based putty (where it is required) complete all as specified and directed. Note:- Putty shall be measured and paid seperately under the relevent item.

M&L for preparation of newly plastered surface of wall and applying two coats of exterior weather proof water base emulsion paint over and including a coat white cement based putty (where ever required) complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coat of white wash complete all as specified and directed.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

Taking down shutters of any description and refixing in the same opening exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F of 15 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old tube or rusted complete all as specified and directed.

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches including taking down pipe complete all as specified and directed.

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches including taking down pipe complete all as specified and directed.

S&F of 20 mm bore GI tubing, medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old tube or rusted all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks build in CM 1:4 including demolition old brick work set any type of cement mortar or mud mortar complete all as specified and directed.

M&L for fly ash brick work with modular 'B' bricks in cm 1:6 using modular bricks straight or curved on plan to any radius demolition old brick work set any type of cement mortar or mud mortar complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work including demolition of concrete in ground floors and pavings (unreinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for machine cut Kota stone slab of 18-20 mm thick flooring laid over including 15 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab surfaces including mirror polishing complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregated) as in sub floors, sub bases, floors and paving complete all as specified and directed.

M&L for screed bed or beding layer of mortar 15mm thick for laying floor finish in CM 1:6 complete all as specifed and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface back coat to wall tile in CM 1:4 complete all as specified and directed.

M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, of any shade area of each tiles exc 0.18 sqm but not exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including demolition old tiles laided any type of mortar complete all as specified and directed.

M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete including demolition old tiles laided any type of mortar all as specified and directed.

M&L for vitrified, light shade tiles 10mm thick (square/rectangular) double charged polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including demolition old tiles laided any type of mortar all as specified and directed.

M&L for vitrified, light shade tiles 10 mm thick (Square/rectangular) double charged polished, area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm in floors, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete including demolition old tiles laided any type of mortar all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/Rectangular) area of each tile exe 0.11 Sqm but not exe 0.18 sqm in floors etc. set and jointed in cement slurry and pointed with white or coloured cement to match including demolition old tiles laided any type of mortar all as specified and directed.

All as per item No 35 here-in-before but on vertical surface including demolition old tiles laided any type of mortar.

M&L for glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match including demolition old tiles laided any type of mortar complete all as specified and directed.

M&L for granite tiles of 15-18 mm thick on vertical surface such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut beddded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 15 mm thick back coat in CM (1:6) including demolition old granite/kota stone/stone slab laided any type of mortar complete all as specified and directed.

M&L for endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including demolition old tiles laided any type of mortar all as specified and directed..Make Johnson endura.

M&L for endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm, as in vertical surfaces such as skirting, risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete including demolition old tiles laided any type of mortar complete all as specified and directed.

S&F in repairs powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed.

S&F of 4.0mm thick plain sheet glass ordinary quality nexc 0.50 Sqm in each pane including hacking out old broken glass (any thickness quality or description) complete all as specified and directed.

S&F of 4.0 mm thick plain sheet glass ordinary quality exc 0.50 Sqm in each pane including hacking out old broken glass (any thickness quality or description) complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.

S&F in repairs to stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.

S&F in repairs 10 to 12mm thick toughfen glass in door, partitions etc similar work etc with stainless steel handle, locking arrangement and with hinges in approved shape and design complete all as specified and directed.

S&F of solar control film 25 micron reflective type, sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F in repairs for 105x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.

S&F in repairs for 125x60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.

S&F in repairs factory made solid panel PVC door shutter of 30 mm thick consisting of frame made out of M.S. tube for top and bottom rails mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails , lock rail & bottom rail, panel will be of wire gauze in lieu of PVC Sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube. The wire gauge shall be stretched to tighten firmly complete.

S&F in repairs machine moulded and factory made 30 mm thick flush shutters, solid core construction with block board core and ply wood face panels with decorative laminate type 1, on both sides complete and fixed to chowkats complete all as specified and directed.

S&F in repairs solid PVC Door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs to aluminium (extruded section body ) Door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

S&F of butt hinges 100mm, extruded aluminium alloy with galvanised mild steel, hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F of butt hinges 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F of 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F of 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300mm ordinary mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs 25mm stainless steel depary curtain rod, decorative type including curtain, fancy type, including bracket & nobs complete all as specified and directed.

S&F of GI frame work size of grid 605 mm x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling wall and ceiling boards, frame of any description fixed in any position, any thickness including cover fillets complete all as specified and directed.

M&L for providing and fixing 12mm gypsum board ceiling fixed with GI angle/channel frame work incl GI wire/ mesh, etc in different levels all complete including joints filled with paster of paris, putty including POP work/Cornices and applying two coat of oil bound distemperof any description fixed in any position, any thickness including cover fillets complete all as specified and direcetd.

S&F of galvanised cold rolled steel section framed work size 600mmx600mm grid size 24x38x0.60mm Tee (bottom precoated) and 24x24x0.50mm thick wall angle galvanised cold rolled steel section incl expansions fasteners as in ceiling including dismantling wall and ceiling boards, frame of any description fixed in any position, any thickness including cover fillets complete all as specified and directed.

S&F of 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified and direcetd.

S&F of 40mm wide of flap continuous (piano) hinges, brass, bright finish complete all as specified and direcetd.

S&F in repairs prelaminated partcle board 18/19 mm thick, exterior grade, prelaminated both side with decorative choice lamination fixed with nails to aluminium framed work complete all as specified and direcetd.

S&F of 100 mm stainless steel handle, cast type, polished bright complete all as specified and directed.

S&F in reapirs 18mm plywood, grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.

S&F in reapirs 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.

S&F in repairs to cabinet hinges soft close SS 8 Crank complete all as specified and directed.

S&F in repairs to magnetic catcher for cupboard shutter complete all as specified and directed.

S&F of kitchen baskets with 100 % stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case depth of 558mm and height 100mm complete all as specified and directed.

S&F of kitchen baskets with 100% stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding platescup, saucers, bowls and dongas with 500 mm car case depth of 558mm and height 150mm complete all as specified and directed.

S&F of kitchen baskets with 100% stainless steel, non-magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding platescup, saucers, bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified and directed.

S&F in repairs wash hand basin counter top having size 440 x 440 x 135 or 420 x 345 x 170 mm rectangular/oval shape complete all as specified and directed.

S&F in repairs to casket type, wash down water closet with seat cover, waste pipe, cistern with lid and fittings (complete set) and fixing complete all as per manufacturere instructions complete all as specified and directed.

S&F in repairs to CP Towel rack complete all as specifed and directed.

S&F in repairs vitreous china squatting pan of Orissa pattern 580x440 mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs of 10 Litres, PVC valveless, syphonic, action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs vitreous china, wash hand basin white flat back of size 550 x 400mm excluding tap but including brackets/CP brass 32mm waste coupling complete all as specified and directed.

S&F in repairs stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F in repairs stainless steel plate rack complete assembeled set of size 31 x 36 x 10 inch) fixed with screws complete all as specified and directed.

S&F in repairs stainless steel plate rack complete assembeled set of size 24 x 30 x 10 inch) fixed with screws complete all as specified and directed.

S&F in repairs 15 mm angle valve, stop cock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bib taps (having weight not less than 0.40 kg as per SSR Part I clause 18.14.2) cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm pillar taps (having weight not less than 0.960 kg as per SSR Part I clause 18.16.2) cast copper alloy, with capstain head chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed complete as in repair incl necessary small GI fittings complete all as specified and directed.

S&F in repairs to 15 mm wash basin mixer, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromimum plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc and fixed in repairs complete all as specfied and directed.

S&F in repairs to CP Health faucet (ABS body) mild steel, chromium plated suitable for 15mm bore with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete all necessary fittings and accessories complete all as specified and directed.

S&F in repairs overhead square shower size 150mmx150mm complete all as specified and directed.

S&F in repairs 15mm wall mixer with provision for bath telephone shower and overhead shower complete all as specified and directed.

S&F in repairs to PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs hydraulic plastic water closet seat cover, any colour, slow motion/ soft closure complete all as specified and directed.

S&F in repairs plastic water closet seat cover, any colour, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.

S&F in repairs tubular towel rail chromium plated 20 mm dia, D type 60 cm long between flanges complete all as specified and directed.

S&F in repairs 15 mm bib cock, two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.

S&F in repairs 15 mm angle valve two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed.

S&F in repairs glass shelf (with bracket) of 22 inch long chromium plated fixing with chrominium plated bolt complete all as specified and directed.

S&F in repairs 10 inch, corner glass shelf (with bracket) complete all as specified and directed.

S&F in repairs CP toilet paper holder with stainless steel flap complete all as specified and directed.

S&F in reapirs soap dish holder of bootom CP and glass holer for soap complete all as specified and directed.

S&F in repairs CP towel ring round 100 mm dia with round flange complete all as specified and directed.

S&F in repairs 75 mm PVC(SWR) pipes single socketed in any length with rubber rings joints laid in trenches or in floors including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S&F in repairs PVC(SWR) 110mm pipes single socketed in any length with rubber rings joints laid in trenches or in floors including taking down eaves gutters and rain water pipes (any size or pattern) complete all as specified and directed.

S&F in repairs 75mm PVC(SWR) bend complete all as specified and directed.

S&F in repairs 75mm PVC(SWR) junction single (single 'T') equal or unequal complete all as specified and directed.

S&F in repairs 75mm PVC(SWR) vent cowl complete all as specified and directed.

S&F in repairs 110mm PVC(SWR) vent cowl complete all as specified and directed.

S&F in repairs PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore complete all as specified and direcetd.

S&F in repairs PVC(SWR) 110 mm bend complete all as specified and directed.

M&L for grinding and polishing kota/marble/terazoo/mosaic flooring complete all as specified and directed.

S&F of 500 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old water tanks complete all as specified and directed.

S&F of 1000 ltrs capacity rotational moulded polyethylene water storage tanks 3 layers (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling old water tanks complete all as specified and directed.

S&F in repairs 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete screwed for iron pipe with epoxy coated aluminium rod complete all as specified and directed.

S&F in repairs providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement of work complete all as specified and directed.

S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F in repairs 30mm to factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F in repairs 30 mm factory made single extruded WPC (Wood Polymer Composite) solid plain Glazed shutter door of 30 mm size open rebated and prepared to receive gauze, etc.(without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note : Wiremesh shall be measured and paid separetely).

S&F in repairs half stall vitreous china urinal white colour of size 710x480x300mm, 1st quality with sensotrinic, sensor flushing valve with complete kit including CP waste with PVC down waste pipe upto floor level (complete set) complete all as per manufacturer instructions, complete all as specified and directed.

M&L for petty reapirs to half stall vitreous china urinal/ sensor type urinal, including changing of sensor of flushing valve with complete kit complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type, white with union for discharge pipe including waste pipe and urinal spreader fixing with 15mm dia pipe complete all as specified and directed

S&F in repairs 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs 100 mm stainless steel handle, cast type, polished bright complete all as specified and directed.

S&F in repairs butt hinges 100mm size, medium weight cold rolled mild steel complete all as specified and directed.

S&F in repairs extruded aluminum anodised handles 100 mm long, fabricated type complete all as specified and directed.

S&F in repairs extruded aluminum anodised handles 150 mm long, fabricated type complete all as specified and directed.

S&F in repairs mild steel pressed handles, oval type, stove enamelled black 150 mm long complete all as specified and directed.

S&F in repairs aluminium anodised barrel, tower bolts 200 mm long of extruded section complete all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolts 150 mm long of extruded section complete all as specified and directed.

S&F in repairs aluminium anodised barrel tower bolts 125 mm long of extruded section complete all as specified and directed.

S&F in repairs mild steel barrel tower bolts, stove enamelled black with bright bolt 200 mm long complete all as specified and directed.

S&F in repairs mild steel barrel tower bolts, stove enamelled black, with bright bolt 125 mm long complete all as specified and directed.

S&F in repairs aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded type 250mm long, plate type complete all as specified and directed.

S&F in repairs aluminium anodised sliding, door bolts with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded type 200mm long, plate type complete all as specified and directed.

S&F in repairs aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 150mm long, plate type complete all as specified and directed.

S&F in repairs aluminium anodised 150mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.

S&F in repairs aluminium anodised 100mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size with swivel joints incl fixing to steel pipe/union complete all as specified and directed.

S&F in repairs mild steel 100mm long hasp & staple type, including bolt to hinge plate and fix with screws complete all as specified and directed.

S&F in repairs aluminium anodised floor door stopper 140 mm with hard drawn steel spring long complete all as specified and directed.

S&F in repairs butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F in repairs butt hinges with galvanised mild steel hinge pin, 100 mm size, aluminium anodised extruded, B-21 type, complete all as specified and directed.

S&F in repair MS bright polished cup board knobs, 40mm dia size with nut, screw & washer, complete all as specified and directed.

S&F in repairs PTMT waste coupling, 32 mm dia, half or full thread, complete all as specified and directed.

S&F in repairs PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed.

S&F in repairs brass spindle for bib cock 15 mm, complete all as specified and directed.

S&F in repairs SS grating of 125 mm dia size, complete all as specified and directed.

S&F in repairs SS grating of 125 mm dia size with hole for waste pipe, complete all as specified and directed.

S&F in repairs Gun-metal gate valve with iron wheel, screwed both ends, 20 mm bore size, complete all as specified and directed.

S&F in repairs of Gun-metal gate valve with iron wheel, screwed both ends, 15 mm bore size, complete all as specified and directed.

S&F of continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed.

S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F repairs ball bearing for rolling shutters complete all as specified and directed.

Running welding in repairs not exc 6mm thickness of metal to be welded complete all as specified and directed.

M&L for welding in repairs n. exc 2.5cm in length n exc 6mm thickness of metal to be welded complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 40340.00

Makewell Enterprises (BID ID -3431534)

Raj Contruction (BID ID -3432397)

sachinder singh (BID ID -3432416)