Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.2 CrAdmitted-Finance 5 B 2 1ST FLOOR OPP METRO PILLOR 484 TILAK NAGAR DELHI 110018 | WEST | DELHI | 110018 | ₹2.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹2.5 Cr+₹22.4 L (10.0%)Admitted-Finance | ₹2.5 Cr+₹22.4 L (10.0%) | L2 | Admitted-Finance |
| 3 | L3₹2.6 Cr+₹40.6 L (18.1%)Admitted-Finance 216 BHARAT NAGAR INDRAPURI BHOPAL MADHYA PRADESH 462021 | BHOPAL | MADHYA PRADESH | 462021 | ₹2.6 Cr+₹40.6 L (18.1%) | L3 | Admitted-Finance |
| 4 | Rejected-Technical | - | - | Rejected-Technical Not Qualifies |
| Sl No | Description | Qty | Unit | FIRE PROTECTION SYSTEM L3 | ISHANK FIRE PROTECTION SYSTE L2 | VOID FIRE CONSULTANTS L1 |
|---|---|---|---|---|---|---|
| 1.00 | PUMPS & EQUIPMENTS (N.S.I): Supplying , Installation , Testing and Commissioning of Electric Driven Main Fire Pump Suitable for Automatic operation and Consist+B13:B75ing of Following Complete in all Respect as Required Horizontal Type Multistage , Centrifugal , Split Casing , Pump of Cast Iron Body and Bronze Impeller with Stainless Steel Shaft Mechanical Seal Conforming to IS : 1520 .Suitable HP Squirrel cage Induction motor , TEFC , synchronous speed 1500 RPM , Suitable for operation on 415 Volts 3 Phase 50 Hz AC Supply with IP 55 protection for enclosure Horizontal Foot Mounted type with class F insulation Conforming to IS : 325 with Energy Efficiency class IE-3. MS Fabricated Common Base Plate Coupling , Coupling Guard Foundation bolts etc as Required Suitable Cement Concrete Foundation duly Plastered with anti vibration Pads . The Head of the Pump is Selected in a manner so as to give a minimum 3.5 kg/sqcm pressure at the highest / farthest point 2280 Lpm at 120 m Head. | 2 | set | 10,50,000 ₹21,00,000 | 10,00,000 ₹20,00,000 | 5,45,000 ₹10,90,000 Lowest |
| 2.00 | Supplying , Installation , Testing and Commissioning of Diesel Engine Driven Main Fire Pump Suitable for Automatic operation and Consisting of Following Complete in all Respect as Required ( Diesel Engine Driven Fire Pump )
Horizontal Type Multistage , Centrifugal Pump of Cast Iron Body and Bronze Impeller with Stainless Steel Shaft Mechanical Seal Conforming to IS : 1520
Suitable HP 1500 RPM Water Cooled with radiator diesel engine conforming to relevant IS standard complete with auto starting mechanism 12/24 Volts electric starting equipment diesel tank exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1 mm thick aluminium sheet cladding residential silencer instruments and protection as per standard specification stop solenoid for auto stop in the event of fault with audio indications painted with post office red colour etc as required .
MS Fabricated Common Base Plate Coupling , Coupling Guard Foundation bolts etc as Required
Suitable Cement Concrete Foundation duly Plastered with anti vibration Pads
The Head of the Pump is Selected in a manner so as to give a minimum 3.5 kg/sqcm pressure at the highest / farthest point
2280 Lpm at 120 m Head | 1 | set | 12,00,000 ₹12,00,000 | 11,25,000 ₹11,25,000 | 6,85,000 ₹6,85,000 Lowest |
| 3.00 | Supplying , Installation , Testing and Commissioning of Electric Driven Pressurisation Pump Suitable for Automatic operation and Consisting of Following Complete in all Respect as Required ( Jockey Pump )
Horizontal Type Multistage , Centrifugal Pump of Cast Iron Body and Bronze Impeller with Stainless Steel Shaft Mechanical Seal Conforming to IS : 1520
Suitable HP Squirrel cage Induction motor , TEFC , synchronous speed 1500 RPM , Suitable for operation on 415 Volts 3 Phase 50 Hz AC Supply with IP 55 protection for enclosure Horizontal Foot Mounted type with class F insulation Conforming to IS : 325 with Energy Efficiency class IE-3
MS Fabricated Common Base Plate Coupling , Coupling Guard Foundation bolts etc as Required
Suitable Cement Concrete Foundation duly Plastered with anti vibration Pads
The Head of the Pump is Selected in a manner so as to give a minimum 3.5 kg/sqcm pressure at the highest / farthest point
180 Lpm at 120 m Head | 2 | set | 2,95,000 ₹5,90,000 | 2,90,000 ₹5,80,000 | 92,500 ₹1,85,000 Lowest |
| 4.00 | Supplying and Fixing Air Vessel made of 450 mm dia 8 mm thick ms sheet 1200 mm in height with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required | 1 | set | 40,000 ₹40,000 | 38,000 ₹38,000 | 26,500 ₹26,500 Lowest |
| 5.00Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required | ||||||
| 5.10 | Suction Header 200 mm thick ness 6.3 | 30 | mtr | 5,000 ₹1,50,000 | 4,500 ₹1,35,000 | 3,350 ₹1,00,500 Lowest |
| 5.20 | Delivery Header 250 mm thickness 6.3 mm | 30 | mtr | 6,000 ₹1,80,000 | 5,000 ₹1,50,000 | 3,550 ₹1,06,500 Lowest |
| 5.30 | Delivery Header 300 mm thickness 7.1 mm | 30 | mtr | 7,000 ₹2,10,000 | 6,000 ₹1,80,000 | 5,150 ₹1,54,500 Lowest |
| 5.40 | Alaram and Control Panel | 1 | each | 6,75,000 ₹6,75,000 | 6,50,000 ₹6,50,000 | 1,50,000 ₹1,50,000 Lowest |
| 6.00PIPING, HYDRANT , SPRINKLER AND ACCESSORIES SYSTEM Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding. The job includes providing and fixing of the support sutructues of ASA 50x50x5 as per requirement. | ||||||
Tender Value
₹2.1 Cr
EMD Value
₹4.3 L
Closing Date
23 Jul 2022, 3:00 pmClosed
Superintending Engineer Mech SKIMS
SKIMS Soura Srinagar
Supply installation testing and commissioning of firefighting system to 250 bedded New IPD Block at SKIMS Medical College and Hospital Bemina Srinagar
2022_SKIMS_173838_1
e-NIT NO. 35 OF 2022-23 Dated 11.06.2022
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
180 days
SKIMS MCH Bemina
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,500
As Described in SBD
₹4.3 L
Office of the Executive Engineer Mech SKIMS
22 Aug 2022
14 Jun 2022
25 Jul 2022
14 Jun 2022
23 Jul 2022
14 Jun 2022
21 Jun 2022
Amount
Supplying and Fixing Air Vessel made of 450 mm dia 8 mm thick ms sheet 1200 mm in height with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required
Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required
Suction Header 200 mm thick ness 6.3
Delivery Header 250 mm thickness 6.3 mm
Delivery Header 300 mm thickness 7.1 mm
Alaram and Control Panel
PIPING, HYDRANT , SPRINKLER AND ACCESSORIES SYSTEM Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc in ground including welding. The job includes providing and fixing of the support sutructues of ASA 50x50x5 as per requirement.
150 mm dia
Excavating trenches of required width for pipes, cables etc including excavation for sockets and dressing of sides, ramming of bottom up to 1.5 m including getting out the excavated soil, and sand filling up to 75mm above the pipe. And disposing off the surplus excavated soil as directed. (SSR)
Providing and fixing Pypkote on black steel pipes (below ground) as per specifications.
Providing Laying Testing and Commissioning of C class Heavy duty MS Pipe Conforming to IS : 1239 / 3589 including Fittings like elbows , tees , flanges , tapers , nuts , bolts , gaskets etc and fixing the pipe on the wall / ceiling with suitable clamp / support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required .
25 mm dia
32 mm dia
40 mm dia
50 mm dia
65 mm dia
80 mm dia
100 mm dia
150 mm dia
Painting black steel pipes (above ground) as per specifications.
25 mm dia
50 mm dia
60 mm dia
80 mm dia
150 mm dia
200 mm dia
250 mm dia
Supplying and Fixing Single Headed Internal Hydrant Valve with instantaneous stainless steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS : 5290 ( Type A ) with blank Stainless Steel cap and chain as required .
Single Headed Stainless Steel
Supplying and Fixing Single Headed External Yard Hydrant Valve with 1 Nos 63 mm dia instantaneous female Stainless Steel Coupling and cast iron wheel ISI marked Conforming to IS : 5290 ( Type A ) with blank stainless steel cap and chain as required .
Single Headed Stainless Steel
Supplying Fixing Testing and Commissioning of butterfly valve of PN 1.6 Rating with Bronze Gunmetal Sheet duly ISI marked complete with nuts , bolts , washers , gaskets conforming to IS : 13095 of following sizes as required .
80 mm dia
80 mm dia
80 mm dia
Supplying Fixing Testing and Commissioning of double flanged sluice valve of Rating PN 1.6 with non rising spindle bronze gunmetal seats ISI marked complete with nuts , bolts , washers , gaskets and conforming to IS : 14846 of following sizes complete as required .
80 mm dia
100 mm dia ( Gear Type)
150 mm dia ( Gear Type)
200 mm dia ( Gear Type)
Supplying and Fixing orifice plate made out of 6 mm thick stainless steel ( Grade 304 ) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg / sqcm complete as required .
Providing Installation Testing and Commissioning of Stainless Steel Y Strainer fabricated out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia holes with stainless steel flange .
80 mm dia
100 mm dia
150 mm dia
200 mm dia
250mm dia
Providing Installation Testing and Commissioning of Stainless Steel Y Strainer fabricated out of 1.6 mm thick stainless steel , Grade 304 , Sheet with 3 mm dia holes with stainless steel flange .
200 mm dia
250 mm dia
Supplying and Fixing 63 mm dia Stainless Steel Short Branch Pipe with 20 mm nominal internal diameter size nozzle conforming to IS : 903 suitable for instantaneous connection to interconnect hose pipe coupling as required
Stainless Steel ( Grade 304 )
Supplying and Fixing of Fire brigade connection of Cast iron body with gunmetal male intantaneous inlet coupling complete with cap and chain as required for suitable dia ms pipe connection conforming to IS : 904 as required
4 Way 150 mm dia MS Pipe
Providing and Fixing of Pressure Switch in MS Pipe Line including connection etc as required
Providing Fixing Testing and Commissioning of Installation control valve of cast iron body brass bronze working parts comprising of water motor alarm bronze seat clapper , clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser / sprinkler system activates , pressure gauge , emergency releases , strainer , pressure switch , cock valve complete with drain valve and bypass , test control box , ball vaves , MS pipe of required sizes , flanges , orifice plates , gaskets etc of following sizes as required
150 mm dia
Supplying and Fixing 63 mm dia 15 m Long RRL Hose pipe with 63 mm dia male and female coupling duly bound with GI wire , rivet etc . Conforming to IS : 636 ( Type A ) as Required .
Stainless Steel ( Grade 304 )
Supplying and Fixing First aid hose reel with MS Construction Spray painted in Post office red conforming to IS : 884 complete with the following as required 20 mm nominal internal dia water hose thermoplastic ( Textile Reinforced ) Type - 2 as per IS : 12585 20 mm nominal internal dia gunmetal globe valve and nozzle Drum and Brackets for fixing the equipments on wall Connections from Riser with 25 mm dia stop gunmetal valve and MS Pipe and socket 36.5 Metre Length
Supplying and Fixing of Fire brigade connection of Cast iron body with gunmetal male intantaneous inlet coupling complete with cap and chain as required for suitable dia ms pipe connection conforming to IS : 904 as required
2 Way 100 mm dia MS Pipe
Supplying and Fixing Air Vessel made of 250 mm dia 8 mm thick ms sheet 1200 mm in height with air release valve on top and flanged connection to riser drain arrangement with 25 mm dia gunmetal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as required
Providing Fixing Testing and Commissioning of 15 mm dia Quartzoid bulb type sprinklers of Rating 68 degree centigrade with required accessories
Pendent Sprinkler
Upright Sprinkler
Horizontal Side wall Sprinkler
Concealed Sprinkler
Providing and Fixing flow switch in following sizes MS Pipe including connection etc as required
100 mm dia
150 mm dia
Supplying Installation Testing and Commissioning of sprinkler flexible pipe ( UL Listed ) of Stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI Test pressure of 875 PSI ( Burst ) with branch line ( inlet ) 25 mm NPT ( male ) thread to sprinkler head ( outlet ) 15 mm NPT female thread with reducer , nipple , 2 side brackets , center bracket , stockbar of following sizes complete as required
1000 mm Length
1000 mm Length
1200 mm Length
1500 mm Length
Providing Installation Testing and Commissioning of adjustable rosette plate for 15 mm dia in white finish UL Listed or FM approved complete as required
Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the FHC Cabinet Complete as required.
Providing and fixing standard firemans axe with heavy rubber handle.
Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm
Providing and fixing weather proof Fire Hose Cabinet of size not less than 0.75 x 0.6 x 0.25 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, external yard hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be mounted on boundary wall complete as required.
Providing & fixing Controlled Percolating (CP) Hose ISI marked (IS:8423) 63 mm dia x 15 m long complete with instantaneous type Stainless steel 63 mm dia ISI marked Male & Female couplings (IS:903) bound and riveted to hose pipe with copper rivets and 1.5 mm copper wire.brusting pressure not less than 22 Kg/Sqcm. (two nos. for each hydrant-valve)
Providing & fixing GM fire Brigade Suction hose coupling (Draw out Connection) with nut for female coupling as per IS:902-1974 complete with 100mm dia. 1 No C.I Foot valve flanged (to be connected to static water tank)
Providing & fixing double flanged flexicon rubber expansion joint with unit control of standard length as per maufacturers specs. Tested to a pressure of 20 Kg/Sqcm including rubber gaskets, flanges, nuts, bolts and washers complete as required.
80 mm dia
100 mm dia
150 mm dia
200 mm dia
Providing and fixing 25 mm dia inspection & testing assembly with Stainless steel valve sight glass, valve & connected to drain line.
Providing and fixing Fire Extinguishers (CO2 type powder ) 4.5 Kg Capacity complete with all accessories as per manufacturers specifications.
Providing and fixing Fire Extinguishers (A, B, C type powder ) 6 Kg Capacity complete with all accessories as per manufacturers specifications.
Providing and fixing Fire Extinguishers (A, B, C type powder ) 9 Kg Capacity complete with all accessories as per manufacturers specifications.
Providing and Fixing ISI marked (IS:2878) Fire and wall suspension bracket, Extinguisher, Trolley mounted carbon-dioxide type capacity 45 Kg. Flat base including valve, discharge hose of not less than 10mm dia 1m long complete in all respects including wheeled trolley, carrying handle and initial fill with CO2 gas as per IS: 307-1996 filled to a filling ratio of not more than 0.667.
Providing and Fixing ISI marked ( IS : 13386 ) fire extinguisher Mech. Foam type capacity 50 litres with gunmetal cap and nozzle, trolly mounted and complete in all respects including initial fill.
ISHANK FIRE PROTECTION SYSTE
FIRE PROTECTION SYSTEM
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
Drawing.pdf
Other Document • 0.74 MB
BOQ_412477.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .