REPAIRS TO WOODEN/ ALUMINIUM JOINERY, CUPBOARDS. ALUMINIUM/ IRON GRILL ETC AT SITE A-3 OF NAVAL BASE KARWAR

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) including making good disturbed portion to match the adjoing surfaces etc complete all as specified and as directed

All as per Item above but n.exc 1.5 sqm etc complete all as specified and as directed

Taking down only shutter of any description exc 1 sqm but n.exc 2 sqm each etc complete all as specified and as directed

All as per Item above but n.exc 1 sqm each etc complete all as specified and as directed

Dismantling boarding, of any size and any description, fixed in any position with screws etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces of wall/ceiling and likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed. Note : The rate quoted by the Contractor is deemed to be included necessary scaffolding and form works.

Dismantling wrought iron or mild steel or aluminium work of any description not otherwise provided for complete all as specified and as directed

Providing and fixing factory made uPVC white colour Sliding window 2.5 / Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Make: Rajshri UPVC coad: RPS 88-01 To 88-08 or equivalent model in makes specified in Appx-B (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured of payment purpose.)

Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. Make:- Rajshri UPVC coad: RPS 60-01 to 60-08 , RPC- 67-05 to RPC- 67-09 or equivalent model in makes specified in Appx-B match with existing door/window (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)