PROVN OF 01 X TOILET BLOCK NEAR BLDG NO A/4/135 AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE PANAGARH

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including conforming to IS.1161 - 2014, Fe-410- W (Gde- E-250) quality- B, bent to a curve complete all as specified and directed

S&F Rolled mild steel Fe-410-W(Gde-E-250) quality B for Joist, channel, angle, or tee sections, fixed in post complete all as specified and directed

S&F MS Plates plain, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe-410- W(Gde-250) quality-B complete all as specified and directed

S&F for Pre-painted galvaume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to a curve fixed with self tapping screws as specified complete all as specified and directed.

M&L for PCC 1:3:6, type C2, (using 40 mm graded stone aggregate) as in post holes, filling and mass concrete complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for Hardcore of broken stone or boulders of gauge nexc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 100mm thick PCC 1:4:8, type D-2, (using 40mm graded stone aggregate) in sub base of floor/paving etc complete all as specified and directed.

M&L for machine pressed precast conctete pre-polished interlocking paver block (coloured) any shape and size conforming to IS:15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surface complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at nctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.Pbrass/ stainless steel screws, all complete as per architectural drawings and the directions of Engr-in-Charge

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engr-in-Charge

S&F SS Double Handle of size 250mm long fixed in toughned glass door complete all as specified and directed.

S&F 4.8 mm sheet glass, ordinary quality and glazing with oil putty in squar exc 0.5 sqm in each pane etc complete all as specified and directed.

M&L for Prelaminated particle board 12 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work 12049 Ditto but prelaminated both sides with decorative choice laminations complete all as speicified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as speicified and directed.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as speicified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as speicified and directed..

All as per Ser No 20.00 mentioned above but in chajja complete all as speicified and directed

All as per Ser No 20.00 mentioned above but for side of slab exc 10cm but n.exc 20cm thick complete all as speicified and directed.

M&L for cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) 75mm thick as in plinth protectionfinished even and smooth with out using extra cement complete all as speicified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/loose soil complete all as speicified and directed.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as speicified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as speicified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan to any radius,in half brick walls built in cement mortar (1:4) complete all as speicified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speicified and directed.

All as per Ser No 28.00 mentioned above but 6mm to 8mm dia complete all as speicified and directed.

M&L for Mild steel TMT bars 10mm dia and over as instirrups , cut to length, bent to shape required, including cranking, bending pirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speicified and directed..

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement complete all as speicified and directed.

M&L for preparation of newly plastered surfaces of wall & applying Two coas of cement based paint over a cpoat of chalk whtening over new surfaces complete all as speicified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6) complete all as speicified and directed.

M&L for rendering 5mm thick on fair faces of ceiling / chajja concrete surfaces in cement mortar (1:3) complete all as speicified and directed.

M&L for prepration of newly plastered surfaces of wall and applying one coat of alkali resistance primer and two coat of oil bound distemper over a layer of 3 mm thick wall care putty complete all as specified and directed.

M&L for prepartion of newly plastered ceiling surfaces and applying three coat of white wash complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as speicified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet trip of 20mm with stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

S&F Factory made steel ventilator with centre hung shutters, dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type including one shop coat of red oxide zinc chrome primer complete all as speicified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as speicified and directed.

S&F aluminium anodised 150 mm barrel tower bolts of extruded section complete all as speicified and directed.

S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as speicified and directed.

M&L for glazed ceramic colour joint free tiles tiles in verticle surface 350x250x7mm thick set and jointed in neat cement slurry over 10 mm thick 1:4 cement mortar plaster and pointed in coloured cement to match complete all as speicified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors laid over 15mm thick 1:6 cement mortar screed bed etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match complete all as speicified and directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

M&L for cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggregate 25 mm thick as in floor for receiving screed bed of floor tiling complete all as specified and directed.

M&L for Preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as speicified and directed

S&F Steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay,with glazing bars, dovetailed or welded complete all as specified and directed.

S&F 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as speicified and directed.

S&F Stop valves 15mm dia CP fancy type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as speicified and directed.

M&L for 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top, minimum three layer) hoisted and fixed in position complete all as speicified and directed Make : Vectus/Sintex/Prayag .

S&F 20mm dia ball brass valves, high pressure , with polythenefloat and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as speicified and directed

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as speicified and directed

M&L for steel tubes,15mm dia bore 'medium grade' with all fitting; laid in trenches or wall complete all as speicified and directed

M&L for PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement etc complete all as speicified and directed

S&F vitreous China wash basin white, flat back, size 580X450 mm including cutting for pinning in ends of brackets complete all as speicified and directed

S&F 15mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT orCOLD' with long screwed sunk and fly nuts complete all as speicified and directed

S&F Vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe) including urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms) and including waste pipe complete all as speicified and directed.

S&F CP Bib taps 15mm dia, with cfancy handle, screwed down, screwed for iron pipe or for brass ferrule, fency type and fixed complete all as speicified and directed.

S&F vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests and PVC (SWR) S or P traps (excluding flushing cisteren and flush pipe) complete all as specified and directed.

S&F wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as speicified and directed

S&F 10 litre capacity two way flash PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F Tubular towel rail, 20mm dia, D type, brass chromium plated, 60cm long between flanges complete all as speicified and directed

S&F PVC connection pipe 15mm size & 600mm long with cromium plated brass coupling on both ends suitable for 15mm bore steel tubing complete all as speicified and directed

M&L for preparation new surfaces or roof and apply two coats of polyurethene (PU) acrylic based water proofing liquid compound over & including one coat of self priming @ one litre oer ten sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/ seepage from roof/ wall complete all as specified and directed by the Engr-in-charge Note:- (i) As per description of these item minimum two coats of Polyurethene (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of polyurethene) PU) acrylic based water proofing liquid compound & primer are required for roof treatment. (ii) Quoted rate shall be deemed to be included for work in buiding/ structure of any height

M&L for rendering 15mm thick in on fair faces of brick work or concrete surfaces finished even and fair on walls in cement mortar (1:4), including taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as speicified and directed

Constn of Septic tank 25 user to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as per drawing

Soakage wells 1.2 M dia X 3 M effective depth excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as speicified and directed

Excavating over areas, n.exc 1.5 m deep and getting out and getting out in soft/loose soil complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) with Old size bricks complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone agregate) as in surface channel and drain etc complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified complete all as specified and directed.

M&L for PCC 1:3:6 type C1 as in lintels / beam upto 1.5m clear span, and other similar bands, copings, kneelers, apex stones, bed plates, kerbs and haunching/ benching, water troughs and the like including weathering, slightly rounded or chamfered ang complete all as specified & directed

M&L for providing RCC precast cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in cover slab for manhole and similar article with plain face set in cement mortar (1:4) complete all as specified and directed

M&L for Loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with clamps and jointed complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, etc. complete all as specified and directed.

S&F plain galvanized 1.00mm thick mild steel sheeting in ridges, hips, valley gutters, drips and straight flashings, length and girth as fixed of class VIII,including dismantling of ridge, hips, valley complete all as specified and directed.

M&L for framed work such as grills etc with endsof bars shouldered nd or riveed or forged into spike, framed guard bars and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F PVC (SWR) pipe fixed in walls/ as Gutter 150mm dia with necessary clamp complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

S&F for Rolled mild steel in framed work Fe-410W (Gde E-250) Quality B as in doors or gates /truss/purlin of angle or other section with gusset plates, rails, braces complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for three coats of white washing on new plaster and unplaster of wall surfaces including preparation of wall surfaces complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

M&L for PCC type C1 1:3:6, (using 20 mm graded stone aggregate) as in kerb including necessary form work complete all as specified and directed

M&L for 400mm thick Kankar or laterite,with mix of fly ash, clinker & stone dust in the proportion of 1:3:6 ( i.e. 10% fly ash,30% clinker & 60% stone dust ) laying in layers n.exc 100mm thick ,watering ,ramming and compacted with vibratory / power roller 8 to 12 tonn roller to required camber and gradient complete all as directed by Engr-in-charge .

M&L for 15cm thick (compacted thickness) in two layer of each 75mm thick WBM with coarse aggregates of grading 2 (63 to 40mm size), spread, rollled and consolidated to gradient and camber required complete all as specified and directed

M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in surface channel etc complete all as specified and directed.

M&L for Pre-polished Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surface of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for fair finished surface of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete complete all as specified and directed.

M&L for cement concrete type B1 (1:2:4) using 20mm graded stone aggregate 40 mm thick as in floor complete all as specified and directed.

S&F tubes medium grade galvanised 20mm bore with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

M&L for rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement etc complete complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed Makes :Pidilite Industries/ Impermo/Snowcem India Ltd/Sika) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).

E/M PORTION Taking down carefully aluminium conductor point wiring (light , fan, socket or powr) complete including fittings such as switches, ceiling rose, pendents, regulators sockets etc and removing (except those to be reused shall be kept in safe custody at the site) andmaking good disturbed surfaces of walls, floors etc tomatch with the existing completeall as specified and directed.

Taking down carefully by unscrewing from wall like bulk head fitting / bldg security light fittings/ceiling light fitting/ cylinderical focus light fittings / flood light fittings etc for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and directed

M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 108.00 above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed

All as per item No 108.00 above but 5 Amp socket on same board with other switches complete all as specified and directed

M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified.

S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps) flush type controlled by one switch complete all as specified.

S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed .

S&F switch socket combination 5 in 1, 6 pin, (5/16 Amps) flush type controlled by one switch complete all as specified.

S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

S&F submen two single core 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed.

S&F submen two single core 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed.

Fixing only recessed mounted 2' x 2' LED lminaire 36 watt including necessary connection complete all as specified and directed.

S&F recessed mounted 2' x 2' LED lminaire 36 watt for grid ceiling minimum lumen output 100 lumen/watt pre-treated CRCA frame powder coated with difused profied including necessary connection complete all as specified and directed.

Fixing only Orbit LED cylinderical light fitting 20 watt, 5700K, indoor type, white colour, beam angle 36º with driver including necessary connection complete all as specified and directed.

S&F Orbit LED cylinderical light fitting 20 watt, 5700K, indoor type, white colour, beam angle 36º with driver including necessary connection complete all as specified and directed.

Fixing only LED flood light fittings 50 watt made up of pressure die cast aluminium housng including necessary connection complete all as specified and directed.

S&F LED flood light fittings 50 watt made up of pressure die cast aluminium housng with toughened glass and high power LEDs and secondary lenses with IP-66 protection system effiency 110/120 LPW, 10 KV SPD S&F

S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S&F MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed.

S&F MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

S&F sheet metal enclosure , single pole and neutral with a two pin and earth pug and socket with one single pole MCB 20 amps, 240 volts complete all as specified and directed

S&F socket outlets 3 pin, 16 Amps flush type 230/240 V complete all as specified and as directed .

S&F submain two single core 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable PVC insulated unsheathed 1100 volts grade drawing in and suitable size PVC conduit (ISI Marked) concealed including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 volts grade earth wire complete all as specified and directed.

S&F LED light fitting 1 x 20 watt box type with same make LED tube rod side connection AC decorative boxype 4' long wih driver, holder including LED tube connecting up with complete all accessories andconnection from ceiling rose with twin core twisted flexible copper conductor cable withsuitable size and earthing complete all as specified and directed.

S&F wall LED security light fittings 35 watt, 230 volts, minimum lumn output 100 lumen/watt, made up ofpressure dia cast housing with prismatic polycarbonate difuser and industrial LED with secondary optic and IP-65/66 including neccessary connection complete with all accessories including connected with 3 core copper cable of suitable 1.5 sqmm size complete allas specified and directed.

S&F LED battem mirror light fitting 1 x 10 watt box type, Polycarbonate, cool day light, 6500K,1000 lumens with accessories complete all as specified and directed. Make: CC/Crompton/ Havells/ Jaguar/Bajaj

S&F ventilating steel body exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.

S&F epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral, 2 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as directed.

S&F epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral, 4 ways with mounting fitted with bus bar, DIN channel, neutral link and incoming contact complete all as directed.

S&F MCB SP 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

S&F MCB SPN 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe as protection pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

S&F Pipes galvanized, 25 mm bore “Medium grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

S&F gun metal, gate valve, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fix complete all as specified and directed.

S&F of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete all as specified and directed.

M&L for cutting existing steel tubing for alternation or addition of size 40 to 50 mm dia GI pipe complete all as specified and directed.

S&F capacity 1000 Ltrs rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top, minimu three layer) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete all as specified and directed by Engr-in-Charge Make: Sintex/Vectus/Prayag

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete all as specified and directed

Supply, laying & Fixing 40 mm bore GI tubing medium grade in trenches/Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

S&F 25 mm bore GI Tubing medium grade in trenches/Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

Supply and laying for cable in trenches or passing through pipe, XLPE insulated, heavy duty, galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 50 sqmm 3.5 core complete all as specified and directed.

M&L for Sand Cushioning (dry) in Trenches for protec-tion of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thick -ness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (Note : For the purpose of Payment, Punned thick-ness of Sand Cushioning only shall be Measured and Paid).

M&L for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of UG cable, complete all as specified and as directed.

S&F/laying 40mm bore, steel tubings,light grade,galvanised with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable complete all as specified and as directed.

Labour only for Horizontal Boring for Passing Protection Pipe up to 80mm Bore (dia), under Road /Foot Path, not exc. 10.00 mtr in a Single Length, complete all as specified and as directed. (Note : Pipe to be measured separately).

S&F 40 mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed .

S&F sheet metal enclosures suitable for flush mounting and surface mounting VTPN DB,8 Way with 250 Amp copper busbar for each phase,fully insulated ,reversible door for IP 43 & IP 54 DB's with provision for upto 250 Amp MCCB as incomer ant SP/TP MCB as outgoing ,complete all as specified and directed.

S&F MCCB 4 Pole 100 Amps, breaking capacity 16 KA, thermal & magnetic adjustable type, 415 volts with extended copper terminals complete all as specified and directed.

S&F MCB TPN 40 Amps 'C' series, breaking capacity 10 Ka, 415 Volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed.

S&F MCB TPN 63 Amps 'C' series, breaking capacity 10 Ka, 415 Volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc complete all as specified and directed.

S&F Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning,complete all as specified and directed.

M&L for earthing complete with MS galvanized plate of size 60cmx60cmx6mm as earth electrode , buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron/welding or steel all as shown in electrical plate No 3 in SSR Part I of 2009 connected to earthing test point all as specified complete with excavation & earth work, PCC pit with 50mm thick RCC cover/CI /MS cover having suitable handle (10mm MS Rod) 20mm dia GI medium grade watering pipe with GI funnel with wire mesh 40mm bore GI pipe medium grade ISI marked) for protection of earth lead conductor and testing on completion complete all as specified and as directed by Engineer-in-Charge.

S&F in repair MCB SPN 6-32 Amps, 'C' series 10KA, 240 Volts and to be housed in DBs complete including necessry connection complete all as specified and directed. Make : ABB/Legrand/Hager/Schneider

S&F switch socket combination 5 in 1, 5A/16A, flush type universal incl GI box complete all as specified and as directed.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 4 Sqmm and one 4.0 Sqmm PVC insulated FRLSH cable with stranded copper conductor drawing into and including PVC Casing caping complete all as specified. (Note: Three runs cable and PVC casing caping will be measured as a single unit).

Supply and laying concealed pipe galvanised "medium grade" including fittings 15 mm dia (1/2") etc complete all as specified and directed.

S&F in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed

S&F Stop valves 15mm dia CP fency type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, hot & cold steel wire connection piece etc. complete all as specified and directed. Make : Bajaj Caldia/Havells/Crompton/Usha

M/S BISWAS AND KUNDU CONSTRUCTION

UNIQUE ENTERPRISE

M/S ANANDA ENTERPRISE

M/S SEHGAL CONSTRUCTION

M/S S M ENTERPRISE

ANSH CONSTRUCTION

BISWAS ENTERPRISE

RUBY BUILDERS AND CONSTRUCTION CO