Works Contract

Amount

230 KV Bus - I (Civil works)

230 KV Bus-II(Civil works)

230 KV Transfer Bus (Civil works)

Applicable GST Amount (Total GST Amount @18%)

Description of Work / Item(s)

Amount

Providing two legged scaffolding work with 15 cm casurina post of 4 m overall length,the distance between the two rows being 1.25 m and the spacing of post being 2 m in both the rows with two horizontal posts with 0.50 m overlap on either side and braces at 2 m c/c including longitudinal and transverse middle braces to stepup and providing platform with country wood planks of 40mm thick and 1 m width etc in a complete form using coir and nails-1m run in restricted area including cost of all materials leads and lifts during L.C period with safety and precaution.

Rate of scaffolding for a height of 3 m and length of 1 m

Chipping the RCC surface and removing damaged concrete,scrapping with wire brush to remove the rust in restricted area including cost of all materials ,leads lifts during LC period with safety and precaution

Attending patchup in the inner surface where ever necessary cleaning the surface,providing prime coat of epoxy compound and applying 10 mm thick epoxy screeding using quartz sand and cost of all materials, labour leads and lifts etc. complete. 20 mm thick

Providing two coats of epoxite epoxy seal coat over screeding surface using epoxy resin and hardener including cost of all materials,labour, leads and lifts etc.complete.

Providing micro concrete for coloumns and beams with the following specification. Applying one coat of Nito zinc primer or equivalent after thorough cleaning the rust in reinforcement. Providing slurry tight form work with shutters with suitable supports which do not derform or leak due to pressure of micro concrete for coloumn. Providing micro concrete using rendroc RG/equivalent as per manufacturers specification.The micro concrete should be placed continuously for an average thickness of 75mm. Applying one coat of polymer modified acrylic emulsion(Nitobond AR or equivalent) on the finished surface as a curing membrane. Applying one coat of DECKGUARD/Equivalent primer by spraying to the concrete surface as per specifications. Applying one coat of DECKGUARD/Equivalent top coat to concrete surface by brush or roller(coating should be done continuously without any break)

Providing micro concrete for coloumns and beams 20-50 mm thick. with the following specification.

Applying one coat of DECKGUARD/Equivalent primer by spraying to the concrete surface as per specifications. and Applying two coat of DECKGUARD/Equivalent top coat to concrete surface by brush or roller(coating should be done continuously without any break)

Mobilization of skilled labour gang and materials for LC work including cost of transport charges,idle charges, leads and lifts etc.complete.

Description of Work / Item(s)

Amount

Providing two legged scaf folding work with 15 cm casurina post of 4 m overall length,the distance between the two rows being 1.25 m and the spacing of post being 2 m in both the rows with two horizontal posts with 0.50 m overlap on either side and braces at 2 m c/c including longitudinal and transverse middle braces to stepup and providing platform with country wood planks of 40mm thick and 1 m width etc in a complete form using coir and nails-1m run in restricted area including cost of all materials leads and lifts during L.C period with safety and precaution.

Rate of scaffolding for a height of 3 m and length of 1 m

Chipping the RCC surface and removing damaged concrete,scrapping with wire brush to remove the rust in restricted area including cost of all materials ,leads lifts during LC period with safety and precaution

Attending patchup in the inner surface where ever necessary cleaning the surface,providing prime coat of epoxy compound and applying 10 mm thick epoxy screeding using quartz sand and cost of all materials, labour leads and lifts etc. complete. 20 mm thick

Providing two coats of epoxite epoxy seal coat over screeding surface using epoxy resin and hardener including cost of all materials,labour, leads and lifts etc.complete.

Providing micro concrete for coloumns and beams with the following specification. Applying one coat of Nito zinc primer or equivalent after thorough cleaning the rust in enforcement. Providing slurry tight form work with shutters with suitable supports which do not derform or leak due to pressure of micro concrete for coloumn. Providing micro concrete using rendroc RG/equivalent as per manufacturers specification.The micro concrete should be placed continuously for an average thickness of 75mm. Applying one coat of polymer modified acrylic emulsion(Nitobond AR or equivalent) on the finished surface as a curing membrane. Applying one coat of DECKGUARD/Equivalent primer by spraying to the concrete surface as per specifications. Applying one coat of DECKGUARD/Equivalent top coat to concrete surface by brush or roller(coating should be done continuously without any break)

Providing micro concrete for coloumns and beams 20-50 mm thick.

Applying one coat of DECKGUARD/Equivalent primer by spraying to the concrete surface as per specifications. and Applying two coat of DECKGUARD/Equivalent top coat to concrete surface by brush or roller(coating should be done continuously without any break)

Mobilization of skilled labour gang and materials for LC work including cost of transport charges,idle charges, leads and lifts etc.complete.

Description of Work / Item(s)

Amount

Providing two legged scaf folding work with 15 cm casurina post of 4 m overall length,the distance between the two rows being 1.25 m and the spacing of post being 2 m in both the rows with two horizontal posts with 0.50 m overlap on either side and braces at 2 m c/c including longitudinal and transverse middle braces to stepup and providing platform with country wood planks of 40mm thick and 1 m width etc in a complete form using coir and nails-1m run in restricted area including cost of all materials leads and lifts during L.C period with safety and precaution.

Rate of scaffolding for a height of 3 m and length of 1 m

Chipping the RCC surface and removing damaged concrete,scrapping with wire brush to remove the rust in restricted area including cost of all materials ,leads lifts during LC period with safety and precaution

Attending patchup in the inner surface where ever necessary cleaning the surface,providing prime coat of epoxy compound and applying 10 mm thick epoxy screeding using quartz sand and cost of all materials, labour leads and lifts etc. complete. 20 mm thick

Providing two coats of epoxite epoxy seal coat over screeding surface using epoxy resin and hardener including cost of all materials,labour, leads and lifts etc.complete.

Providing micro concrete for coloumns and beams with the following specification. Applying one coat of Nito zinc primer or equivalent after thorough cleaning the rust in enforcement. Providing slurry tight form work with shutters with suitable supports which do not derform or leak due to pressure of micro concrete for coloumn. Providing micro concrete using rendroc RG/equivalent as per manufacturers specification.The micro concrete should be placed continuously for an average thickness of 75mm. Applying one coat of polymer modified acrylic emulsion(Nitobond AR or equivalent) on the finished surface as a curing membrane. Applying one coat of DECKGUARD/Equivalent primer by spraying to the concrete surface as per specifications. Applying one coat of DECKGUARD/Equivalent top coat to concrete surface by brush or roller(coating should be done continuously without any break)

Providing micro concrete for coloumns and beams 20-50 mm thick.

Applying one coat of DECKGUARD/Equivalent primer by spraying to the concrete surface as per specifications. and Applying two coat of DECKGUARD/Equivalent top coat to concrete surface by brush or roller(coating should be done continuously without any break)

Mobilization of skilled labour gang and materials for LC work including cost of transport charges,idle charges, leads and lifts etc.complete.