REPAIR TO ROOF TREATMENT CONCRETE SPELLING SURFACES, SEEPAGE AND OTHER CONNECTED ITEMS FOR MD ACCN AT SBI LINE, KAREN LINE, POLICE LINE AND REPAIR MAINT OF FLOORING, JOINERY AND OTHER BR WORKS OF PUMP HOUSE AREA OF AGE BR-I UNDER GE PANAGARH

Amount

Demolition of brick work built in cement mortar for cracked wall ,Cracked manholes, septic tank,soak pits etc. in foul position complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight curved on plan exceeding 6 metre mean radius with old size bricks built in cement mortar 1:6 for cracked wall of manholes,septic tank, soak pita etc. in foul position complete all as specified and directed.

Material and labour for brick work with sub class 'B' brick straight curved on plan exceeding 6 metre mean radius with old size bricks built in cement mortar 1:4 for cracked wall of manholes,septic tank, soak pita etc. in foul position complete all as specified and directed.

All as per item No 2.00 here-in -above but except bricks complete all as specified and directed. Note :- Old serivceable bricks obtained from Srl No 2.00 shall be reused after proper cleaning.

M&L for brick work with old size sub class ‘B’ bricks straight or curved on plan to any radius in half bricks thick walls, built in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & direceted.

M & L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface channels and drain complete all as specified and directed.

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing even complete all as specified and directed.

M & L for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregare) as in plinth protection and paving even and smooth without using extra cement complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M & L for providing pre-cast cement concrete 1:2:4 type B-1(20 mm graded stone aggregate) for cover slab, manholes etc set in CM 1:4 complete all as specified and directed.

Demolition of RCC ( other then ground floor )chajjas similar suspended work.and removing unserviceable material exc 100 mtr complete all as specified and directed.

M&L Reinforcement cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) for Chajjas complete as specified and directed.

S&F TMT steel bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for reinforcement, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete as in reinforcement as specified and directed

All as per item No 16.00 but 6mm to 8mm dia.complete all as specified and directed.

M&L hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&LSand filling under floors or in foundations including watering and consolidation levelled in layers, complete all as specified and directed.

S&F 38 mm wide and 3 mm thick glass dividing strips as in flooring complete all as specified and directed.

M&L welded steel wire fabric supplied and fixed laid under floor weight per Sqm n exc 4 Kg /sqm complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

M & L for polythene film, black 50 micron laid in floors complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F factory made 35 mm thick 2nd class hard wood plain framed panelled shutters (three panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per ISI 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvant cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitabale PVC sheet beading, and jointed together with solvant cement, and S&F in the frame at side as per specification and drawing complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel ventilators with centre hung shutter including hinges, steel peg stay, complete all as specified and directed.

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S & F mild steel flat iron as in hold fast, clamps articles conforming to FE 290 Gde-E-165 complete all as specified and directed.

S&F providing solid pvc double door frame (Chowkhat) of size 120mmx50mm with thickness of 5mm made out of extruded 5mm thk pvc sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos heat moulded pvc section the inside section of size 110x30mm shall be made from plain colour pvc sheet of 5mm thk,the inside section will be covered with 5 mm thick pvc sheet c shape covered section of size 120mmx35mm.at center top position 15mm thick &50mm wide pattern section should be pasted with solvent cement adhesive to make double pattam of frame complete all as specified as directed.

S&F Providing internal(prelam) single door frame of size 100mm x 45 mm with a wall thickness of 5 mm,made out of extruded 5 mm thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos heat bent PVC sheet sections.the inside section of size 90 x 30 mm shall be made from plain colour PVC sheet.the frame shall be mitre cut at two corners and joined with 4 nos of 150mm long brackets of 15mm x 15 mm MS squre tube.the two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 gauge through out the frame.the door frame shall be fixed to the wall using 8/100mm long MS screws through the frame by using anchor fastners.a minimum of 4 nos of screws to be provided for rach vertical member & minimum 2 nos for horizontal member etc complete as per manufacturer specification complete all as specified and directed.

S&F providing 30mm thick factory made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20mmx40mm for stiles as well as top bottom & lock rail MS frame shall have a coat of metal primer of approved make & manufacturer.the inside panel shall consist of 20mm thick multichamber hollow pvc section of 1mm wall thk bounded using solvent cement /cynoacrylate adhesive with 5mm thk moulded pvc sheet manufactured by an ISO 9001-2008 certified company complete all as specified and directed.

S&F Providing 30mm thick factory made wire mesh solid pvc door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stiles and 15mmx15mm for top lock&bottom rails MS frame shall have a coat of metal primer of approved make and manufacturer 19mmx19mm MS squre tubes shall be covered with heat moulded plain sheet c channel made from 5mm thick pvc sheet manufactured by an ISO 9001 2008 certified company complete all as specified and directed.

S&F Louvered windows are made out of frames section 60X60X2.5mm multi cavity section suitably suitably reinforced by GI and welded in corners and glass can be fixed on aluminum louward blades complete all as specified and directed.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. Note: Form work required for these items included in the unit rate of this item.

S&F aluminium anodised barral tower bolts 200 mm long, of extuded section and fixed stove enamelled black with bright bolt complete all as specified and directed.

S& F aluminium alloy anodied sliding door bolt size 250mm with hasp staplw (bolt type ) and fifing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extrueded section or cast aluminium alloy and fixed complete all as specified and directed.

S & F 2 nd class hard wood small fittings such as door and window stops and cleats including all necessary articles exceeding 200 cu cm and n. exc. 500 cu. cm each complete all as specified and directed.

S& F aluminium alloy anodied sliding door bolt size 300mm with hasp staplw (bolt type ) and fifing clips of sheet cast or extruded section and fixing bolt and sliding bolts of extrueded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 125 mm aluminium handle cast type anodized complete all as specified and directed.

S&F 150 mm aluminium handle cast type anodized complete all as specified and directed

S&F MS Butt hing medium weight cold rolled 100mm size complete all as specified and directed.

S&F MS Butt hing medium weight cold rolled 50mm size complete all as specified and directed.

S & F 100 mm long hasp and staple, aluminium anodized with bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F butt hinges of size 100 mm for PVC door complete all as specified and directed.

S&F tower bolt of size 150 mm for PVC door complete all as specified and directed.

S&F Bow handle of size 150 mm for PVC door complete all as specified and directed.

M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxid zinc crome primer all as specified.

M&L preparation of old steel surface exc 10cm width or girth and applying one coats of synthetic enamel paints all as specified.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old wood or wood based surface and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting or dado, etc set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar 1:4 and pointed in white or coloured cement to match all as specified and directed.

M&L Non - skid white Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed.

M&L Non - skid white Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as directed.

S&F 12-14 mm thick green marble/tiles machine cut pre polished (not less then 1.5 sqm in each piece) jointed with cement and pointed in white cement with pigment to match over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) incl moulding the edges and making hole for gas pipe all as specified.

Material and labour for 20cm x 20cm x25mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, paving etc. including the setting and jointing in neat cement paste or slurry 0.3kg/Sqm over 20 mm thick screed bed or bedding layer in cement mortar (1:4) complete as per manufacturer instructions and direction.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on other than fair face of brick work surfaces finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on fair face of brick work surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick cement plaster in two coats (each coat 10 mm thick) on external surfaces of brick work in cement mortar (1:4) and second coat to be applied with WPC and recrone polyster fibre including fair finishing (WPC will be measured and paid separately).

M&L for rendering 5 mm thick in cement mortar (1:3) on fair face of concrete surfaces as in ceiling, shelves etc. finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering dubbing coat over damaged irregular surface of chajjas roof projections ceiling facia etc average 15mm thick in cm 1:4 over cement sturry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth incl making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note : Rate for form work if reqd to be incl in the rate quaoted by the contractor.

M&L for preparation of surfaces new plastered surfaces & applying two coat of oil bound distemper over a coat of alkali resistant priming paint over one coat of putty @ 0.2 Kg/10 Sqm on ceiling complete all as specified and directed.

M&L for preparation of old plastered surfaces complete Removal existing finishes including filling of small holes etc. and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of new plastered wall surfaces & applying two coats of oil emulsion over a coat of alkali resistant priming on over one coat of putty @0.2 Kg/10Sqm on plastered surface preparatory to oil emulsion complete all as specified and directed.

M&L for preparation of old wall surfaces complete Removal existing finishes including filling of small holes etc and applying two coat of oil bound distemper over a coat of alkali resistant priming paint over one coat of putty @0.2Kg/10 Sqm complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L Preparation of old surfaces on wall applying one coat of cement based paint complete all as directed.

M&L Preparation of new plastered surface of wall applying three coats white wash complete all as specified and directed.

M&L Preparation of old plastered surface of wall an applying two coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of wall complete removal of existing finishes including filling of small holes etc. and applying two coats of cement based paint over a coat of alkali resistant priming paint complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe, all completed as specified.

S&F in repair Vitreous china Water closet (Squatt pattern) complete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and including connection to GI pipe line complete all as directed.

Supply & Fix in repair CP health faucet with 1.50 mtr long tube & hook complete all as specified and directed.

S&F in repair PVC (SWR) P trap 110/110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) Q trap 110/110 mm bore complete all as specified and directed.

S&F in repair Vitreous China valveless, syphonic action type,flushing cistern, low level, white, with inlet, ball valve,float and handle including brackets flushing cistern 10 ltrs capacity complete all as specified and directed.

S&F in repair flush pipe of chromium plated brass tube,32mm dia, for low level cisterns complete all as specified and directed.

S & F in repair soap dish, vitreous china white, approximate size 160 x 160 x 90 mm, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair vitreous china wash basin white,flat back of size 580x 450mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete at site complete all as specified and directed.

S&F in repair vitreous china wash basin white,flat back of size 550x 400mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete all as directed.

S & F in repair pillar tap 15 mm dia cast copperalloy fency tpye with capstan heads chromium pleted screwed down high pressure with or without lettered Hot or Cold with long screwed screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed.

S & F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x160mm comp all as specified and directed at site.

S & F in repair Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size 900x600mm fixed with steel fastners or steel screw complete all as specified as directed.

S&F in repair swan neck bib cock 15mm bore cast copper alloy with capstan head, chromium plated fency type, with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

M & L PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified.

S&F in repair 15mm bore Bib tap long body with CP nipple cast copper alloy with crutch or butterfly handle, chromium plated fency type screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore fency type stop valve/angle valve cast copper chromium plated screwed down, high pressure with capstan head, screwed both ends for iron pipe complete all as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail all completed as specified.

S&F in repair tubular towel rail 20mm dia D type and 60cm long between flanges of brass chromium plated.

S & F tubular towel rail brass chromium plated 20mm dia, 'D' type, 60cm long between flanges and including brackets complete all as specified and directed.

S & F in repair 15mm bore Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair Chromium plated toilet paper holder colour fixed to wall with CP brass screwes.

S & F in repair vitreous china squatting pan of pattern 'Orrisa' size 580 x 440mm white with integral foot rests including connection to trap and to flushin pipe, antisyphonage pipe ect complete including making good to existing (floor / Tiles).

M & L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified and directed.

Use & waste of formwork to chullah hoods, chajjas, troughs and similar items including edges

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, flat or curved incl ridges hips valleys as in roof coverings.

S&F galvanized corrugated mild steel sheeting 0.63 mm thick with two corrugation side lap class VIII fixed with L-type or J-type or cranked hook bolts in roofs complete all as specified and directed.

All as per item No 115.00 mentioned here-in–before but except sheeting (any thickness) complete all as specified and directed.

S&F plain galvanized 0.80 mm thick mild steel sheeting in ridges, hips, valley gutters, drips and straight flashings, length and girth as fixed of class VIII complete all as specified and directed.

All as per item No 117.00 mentioned here-in-above but except sheeting complete all as specified and directed.

S&F 0.50 mm thick pre- painted galvalume aluminium zinc coating GI based corrugeted steel sheet of any colour as approved of 550 Mpa tensile strength as in roof covering / cladding to wall fixed with self tapping screws complete specified and directed.

All as per item No 119.00 mentioned here-in-above but fixing only complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in ridges, hips valley gutter etc fixed with self tapping screws complete all as specified and directed.

S & F in repair toilet paper holder, vitreous china box type fixed to wall with chromium placed brass screws complete all as specified and directed.

S & F for vitereous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms) complete all as specified and directed.

S & F in repair brass chromium plated shower rose 125 mm size swivel type with connecting rod 15 mm bore complete all as specified and directed.

S&F in repair stop valve cast copper chromium plated concealed with long shank type screwed down, high pressure with capstan head suitable for 15 mm bore complete all as specified and directed.

S&F in repair stainless steel gratings of outer frame dia 150 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement.

Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel complete all as specified and directed.

Fixing only in steel tubing and connection 15 mm dia bore complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel complete all as specified and directed.

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Fixing only 20 mm dia old galvanized pipes incl new fittings where necessary fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

S & F in repair PVC waste pipe 32mm dia for wash basin and sink 01 meter long complete all as specified and directed

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit & making good in cement mortar (1.3) of girth exe 10 cm and n.exe 20 cm in brick wall complete all as specified and directed.

Taking out the root of trees/stirrups of any girth from the surface of bldgs and making good the damaged portion to match with the existing surface in cement mortar (1:3) or with PCC (1:2:4) or BB work in cement mortar (1:6) and finally finishing the surface to match with the existing surfaces complete all as specified and directed.

Taking down CI pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed .

S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm bore complete all as specified and directed.

S&F PVC (SWR) bends of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) junction double (double T) equal or unequal provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F PVC (SWR) reducer of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm stone aggregated) as in roof including water proofing compound complete all as specified and directed (WPC paid and measured separetely).

M&L (a) 1st Layer: Grading with cement concrete - M & L for 50 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) for grading in roof all as per Para 11.42.2 of SSR Part –I 2009 including rendering 5mm thick over the cement concrete surfaces in cement mortar (1:4) mixed with water proofing compound complete all as specified and directed. (b) 2nd Layer: Application of Primer - Priming the surface with a mixture of ShaliUrethane (R) BTD of STP make (or primer of equivalent and potable water in the ratio of 1:1 i.e. (200 grm primer & 200ml water) and apply @ 400grm/sqm of the mixture and allow to touch dry shall be applied on the prepared surfaces complete all as specified and directed. (c) 3rd Layer: Applying one coat of ShaliUrethane ® BTD of STP make (or primer of equivalent @ 1 Kg/Sqm by roller/airless spray while the primed surface is takly and spread fiber glass net of 45 gms with overlaps of 50mm in both directions when the surface is still tackly and applying second coat of Shali Urethane (R) BTD of STP make (or primer of equivalent @ 1 Kg/Sqm by roller/airless spray as final coating complete all as specified and directed. (Note: (i) Unit rate shall deemed to be included complete roof treatment process i.e. all three layers. (ii) WPC will be measured and paid seperately.)

M&L for 15 mm thk plaster in cement mortar (1:4) with liquid water proofing compound ( WPC paid and measured separetely) both on floor and wall, then apply Epoxy Resin coating all as per manufactur's instruction as in sunken floor slab complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.50 sqm in each pane.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc. 0.50 sqm each pane.

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions.

S&F in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (With brackets).

S&F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement

Fixing only in repair 10 litre capacity PVC valveless, syphonic action type low level flushing cistern complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets).

Dismantling of asbestos cement (corrugated, semi corrugated etc) of any thickness incl ridges hips valleys as in roof coverings.

M&L for 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls, etc fixed with L-type or J-type or cranked hook bolts.

All as per item No 164.00 mentioned here-in-above, but except sheeting complete all as specified and directed.

M&L for asbestos cement two piece serrated ridge for corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked bolts.

All as per item No 166.00 mentioned here-in-above, but except ridge complete all as specified and directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F wind ties for roof including securing bolts, flat iron fillets (for securing weather boarding with screw bolts and nuts) including necessary drilling, bolting or riveting etc and similar work conforming to Fe 310-0 including painted with one coat of zinc chromate primer paint complete all as specified and directed.

All as per item No 169.00 mentioned here-in-above but fixing only complete all as specified and directed.

SHREE LAXMI CONSTRUCTION

M/S DEBNATH MONDAL

ANIMA ENTERPRISE