Repair to road pot holes road furniture and road painting at certain locations of western complex of MCTE area under GE MCTE Mhow

Amount

M&L for preparing surfaces of existing black top surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bitumenous primer using paving bitumen VG-30 at the rate of 05 kg / 10 sqm over WBM surfaces and M&L for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. (Note: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from hot mix plant and spreading shell be done by using mechanical paver only)

M&L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

S&F in repair Cat Eye as (Road Stud) reflective type of metal body alloy of size 110mm x 120mmx 24 mm with PAMA striples reflector of Model No DA 972.0 fixed with and incl MS studs of suitable size as per manufactures instructions complete all as specified and directed. Make: Dark Eye, 3 M, Sun eyes

S&F in repair Solar Studs aluminium alloy shall (100 % watere proofing design according to IP 67) of size 125 mm x 125 mm x 25 mm ( shank 65 mm) of high efficiency Mono Crystaline solar panel 2.4 V/ 0.3 watt one Ni- cd rechargable battery (1.2 V/1600 MA) consisting of six super bright LEDs with 10,000 to 18,000 mcd (Milicandela) for high brightness of different colours and view distance up to 1000 mtr complete all as specified and directed. (Make: Dark Eye (Model No DA 110 (DHRUV) , or equivalent of 3M, Sun eyes)

S&F retro reflective sign board of size 1200mm X 900 mm with writing letters (as required) on board and made by 4 mm thick alminium composite panel sheet finished of size as required with high intensity prismatic reflecting tape on both side duly framed on 60 mm dia and 25 mm dia stainless stell frame of 304 grade, post of height 2.60 m from GL with 16 gauge steel duly fitted with round globe on top of 2.60 m height and fixed with PCC 1:2:4 in ground upto 60 cm depth and necessary earth work as directed by Engr-in-charge complete all as specified and directed.

S&F in repair road Solar delineator made of 50 mm round MS pipe 80 to 100 cm high above ground level with high four quality LED flashing light of red or yellow in colors with operating tme of 3-4 consecutive days (with full charge) complete all as specified and directed as per manufactures instructions. NOTE : 1. Excavation, removal of surplus soil and size of pcc pit is 200mm x 200mm x 200 mm filled with pcc 1 :2:4 type B-1. rate quoted shall be included above. Make - Dark Eye (Model No : DA 112 ) or equivalent of SUNEYES/ 3M/Alcolite/solar

S&F in repair spring posts made of special PU (Poly Urethane) material, which can quickly restore to its original state without damaging the vehicle and itself in case of a high speed collision. Highly reflective heat transfer sheet is pasted on specially designed grooves, make it highly visible from distance at night or in bad weather. The tensile strength and UV stabilizers enables it withstand the harshest of weather conditions. It is easy to install with an anchor fasters and all as specified and directed

S&F in repair 500mm to 1000 mm dia Convex mirror for visibility and fixed with 50 dia SS pipe medium grade ISI mark( height of pipe not less than 1.20 m from ground leve ) & embeded in post holes size (200mm x 200 mm x 400 mm ) in pcc 1:3:6 type C-2( using 40 mm graded stone aggregate) & including earth work & excavation ,RFR complete all as specified and directed.

Material and labour for marking lines, dashes, arrows, letters etc. not exceeding 15 cm wide on bituminous surfaces with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST & BIS specification, not less than 2.00 mm thick of white / golden / yellow as approved colour / shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt, oil grease etc. complete all as specified and as directed.

M/S BABULAL SURAJMAL

Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd.