138WE/L-40/2020-21

Amount

Demolition of precast block work or stonework built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed.

Dismantling of wooden fillets, rails, posts, rafters, purlins, grids for ceiling and wall panelling etc under 40 sqcm in section all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, blankets) any thickness including covered fillets complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed

Taking down chowkhats/frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 sqm each complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 sqm and not exceeding 4 Sqm each complete all as specified and as directed by the Engineer-in-Charge.

Hacking out old broken glass any thickness , size, quality or description from wooden/steel frame or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and as directed by the Engineer-in-Charge.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out, in any type of soil, complete all as specified and directed.

Returning filling in incl spreading levelling watering and well ramming in layers n. exc 25cm thick complete all as specified and directed .

Removing excavated soil to a distance n exc 50m and depositing at a level n exc 1.5m above the starting point complete all as specified and directed .

Vetrified ceramic tiles 10mm thick (light shade) (square/rectangular), polished, area of each tile not exceeding 0.36 sqm as directed by EIC, as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE.

2nd class soft wood, clean sawn, as in battens for grids of ceiling and lining fixed with nails exc 13 sqcm and n. exc. 25 sqcm in section complete all as specified and as directed.

2nd class soft wood, clean sawn, as in beeding for edges of ceiling, lining or wooden flooring work fixed with nails exc 6 sqcm and n. exc. 13 sqcm in section complete all as specified and as directed.

9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, medium density, fixed with screws to frame work as in fixed in wall panalling and partition, with nails to timber frame work, complete all as specified.

9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, medium density, fixed with screws to frame work as in fixed in ceiling, flat or sloping with nails to timber frame work, complete all as specified.

19/20mm dia aluminium alloy anodised curtain rods, complete all as specified & directed.

Aluminium anodised curtain bracket of suitable size, complete all as specified & directed.

0.63 mm thick CGI sheeting with nominal grade of zinc coating 120 gms per sqm with two corrugation side lap fixed with coach screws and washers as in roof covering,walls etc complete all as specified and directed.

Material and Labour for Precast cement concrete block, (1:3:6), type C-1, (using 20mm graded crushed stone aggregate) masonry with solid blocks exceeding 10 Cm in width and setting in mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge.

Rendering 15 mm thick on other than fair faces of brick work, in cement mortar 1:6, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed by the Engineer-in-Charge.

Rendering 15 mm thick, on fair faces of brick work, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra cement),complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and as directed by the Engineer-in-Charge.

Material and Labour for plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in hold fast, bed block and like complete all as specified and as directed by the Engineer-in-Charge.

35mm thick 2nd class hard wood plain framed panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, fixed to chowkats,complete all as specified and as directed by the Engineer-in-Charge.

35 mm thick 2nd class hard wood glazed & skeleton shutters open rebated and prepared to receive glass, gauze etc (sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass, etc, sizes of members of window shutters as specified in SSR- 2009 Part-I Section 8.24(b) complete all as specified and directed.

Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane, complete all as specified and as directed by the Engineer-in-Charge.

Sheet glass 4.8mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing mild steel butt hinges, medium weight cold rolled 100 mm size complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 150 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Extruded Aluminium alloy handles 150 mm size, fabricated type, anodized, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing mild steel butt hinges, medium weight cold rolled 75 mm size complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 100 mm long aluminium anodized, barrel tower bolt of extruded section, complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing Extruded Aluminium alloy handles 100 mm size, fabricated type, anodized, complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new plastered surfaces of wall of any description and applying three coats of white wash complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over one coat primer, complete all as specified and as directed by Engineer-In-Charge.

Preparing zinc or galvanised surfaces to receive painting by coating with mordant or approved solution including washing and cleaning etc;and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description, not other wise described over 10 cm width or girth complete.

Taking down carefully aluminium / copper point wiring light/fan/socket or power complete including unscrewing from board fitting and fixture such as switches, sockets, ceiling roses, lamp holders, brackets, pendent holder , light fittings , regulators, distribution/ Meter boards, MCBs etc and making good the distturbed surface matching with existing specifications complete all as specified and directed.

Point wiring for one light point or fan point controlled by one switch with 1.50 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts fire resistance ISI, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board for mounting fitting/ switches/ sockets and 1.50 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Description all as per serial item No-40.00 here-in-before but for one 5 Amps switch socket combination on same board, complete all as specified and as directed.

Description all as per serial item No- 40.00 here-in-before but for one 5 Amps switch socket combination on independent board, complete all as specified and as directed.

Point wiring for power point 3 pin switch socket 15 Amp on independent board with 2.50 Sqmm, PVC insulated, unsheathed, FRLS single core, multi-stranded, copper conductor cable, 1100 Volts, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed surfaces of walls and ceilings, terminated in and including rectangular PVC board 2mm for mounting fitting/ switches/ sockets and incl one run of 2.5 Sqmm, copper conductor, multi-stranded, FRLS as earth continuity wire connected to earth terminal, including making good to disturbed surface as matching to existing descriptions/ specifications, complete all as specified and as directed.

Switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and as directed.

Switch socket combination 2-in-1, 5/6-pin, 5/ 15 Amps, flush type, complete all as specified and as directed.

Switch socket combination 2-in-1, 5 Amps, flush type, complete all as specified and as directed.

Socket outlet, 3 pin & 2 pin, 5 Amps, flush type, complete all as specified and as directed.

1 x 20W LED, tube light fitting mounted on integrated sleek extruded polycarbonate LED channel with white acrylic cover suitable for 230 volt 50 Hz cool white colour bipin holder connector block etc complete will all accessorized internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete. Make: Havells cat part No- LHEYBYP60E1W020 or equivalent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

1 x 12W LED, tube light fitting mounted on integrated sleek extruded polycarbonate LED channel with white acrylic cover suitable for 230 volt 50 Hz AC box type 2 feet complete with 1X12W tube rod all accessories internally prewired and connecting up with twin core twisted flexible copper conductor of suitable size. Make: Havells cat part No- LHEWEBP7PL1W012 or equivalent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

LED mirror light fitting 8 watt, 230 volts, box type, with standard specifications etc. warm white colour complete. Make : Syska/CG Philips/Wipro/Bajaj.

Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings,with & including 9 watt LED lamp complete all as specified and as directed.

Ceiling rose, surface bakelite 65 x 50 mm three terminals complete all as specified and directed.

Endura Flat panel for grid ceiling complete with electronic driver & high brightness SMD LEDs, 36 Watt, 600K, 230 Volts, 50 Hz AC complete with all accessories internally prewired and connecting up with twin core twisted flexible copper conductor of suitable size. Make : Havells Cat Part No LHEWEBP7IL1W036 or equivallent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

Ultra modern, compact surface mounted luminaire in MS housing with opal diffuser and complete with electronic driver & high brightness SMD LEDs, 36 Watt, 600K, 230 Volts, 50 Hz AC complete with all accessories internally prewired and connecting up with twin core twisted flexible copper conductor of suitable size. Make : Havells Cat Part No LHEWEBP7NL1W036 or equivallent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

Decorative wall mounting chrome finish fixture with textured glass suitable for 40W mini GLS lamp or 7 watt LED lamp complete with all accessories internally prewired and connecting up with twin core twisted flexible copper conductor of suitable size. Make : Havells Cat Part No LHFHDAC2TB1W040 or equivallent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

Energy saving new generation 10W LED bulkhead luminaire with opal diffuser including making electric connection with three core copper conductor of appropriate size to the ceiling rose or from the junction boxes complete all as specified and as directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 of equivallent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

Sheet metal enclosures for distribution box for MCBs, Single pole and neutral, 12 way with, 240 Volts, double door, with 200 Amps rated bus bar blank plate complete all as specified and directed.

Sheet metal enclosures for distribution box for DBs, triple pole and neutral (TPN), 4 way with, 415 Volts, double door, with 200 Amps rated bus bar blank plate complete all as specified and directed.

MCB, triple pole and neutral (TPN), 63 Amps, 415 Volts , 10 KA C series, complete all as specified and directed.

MCB, single pole and neutral, 63 Amps, 240 Volts , 10 KA C series, complete all as specified and directed.

MCB, single pole, 6 to 40 Amps, 240 Volts, 10 KA C series, complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 AMP complete all as specified and as directed.

S&F Lamp LED 10 wattt 230 Volt 50 Hz AC complete all as specified and as directed.

S&F Lamp LED 7 wattt 230 Volt 50 Hz AC complete all as specified and as directed.

Sub main wiring for circuit/ submain wiring alongwith earth wire with two run of 6 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi stranded, FRLS, ISI marked, 1100 Volts grade and one run of 4 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed on surfaces of walls/ ceilings, including taking out existing and making good to disturbed surface matching to existing descriptions/ specifications, complete all as specified and directed.

Sub main wiring for circuit/ submain wiring alongwith earth wire with two run of 4 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi stranded, FRLS, ISI marked, 1100 Volts grade and one run of 2.5 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including PVC casing and capping, fire resistance, ISI marked, fixed on surfaces of walls/ ceilings, including taking out existing and making good to disturbed surface matching to existing descriptions/ specifications, complete all as specified and directed.

Building security light LED type suitable for working on 230 volts, 50 Hz, AC of 48 Watts including connections and testing complete all as specified and directed.

GI bracket made out of 50mm dia medium grade pipe 1.2 m length to shape for fixing on wall and suitable for 48 watt street light with 02 Nos clamps of flat iron (40 x 4 mm), nuts & bolts complete all as specified and directed by Engineer-in-Charge.

Energy saving, exclusive design 40 watt LED post top luminaire made of pressure die-cast aluminium housing and clear glass complete with PCC work and suitable length/size of GI pipe for fixing complete all as specified and as directed. Make : Havells Cat Part No LHEVBCP7PN6J040 or equivallent in Bajaj/ Crompton Greaves/ Philips/ Wipro/GE.

XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 11000 volts grade, cross sectoinal area, 25 Sqmm, 4 core laid in trenches/road crossing/under floor/on walls/on poles and testing, complete all as specified.

XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 11000 volts grade, cross sectoinal area, 10 Sqmm, 2 core laid in trenches/road crossing/under floor/on walls/on poles and testing, complete all as specified.

XLPE insulated, armoured, heavy duty electric aluminium conductor, PVC sheathed galvanised steel strip or wire, armoured electric power cables, with aluminium stranded conductor 11000 volts grade, cross sectoinal area, 4 Sqmm, 2 core laid in trenches/road crossing/under floor/on walls/on poles and testing, complete all as specified.

Sand cushioning to protection of underground cables, laid 8 Cm before laying and 15 Cm after laying of cable, and punned to form an overall layer of 18 Cm thick, complete all as specified and directed Note: Punned thickness shall be measured.

Supplying and laying un-reinforced precast concrete cable cover, Class LV Type-I, flat, size 250mm x 150mm x 40mm, complete all as specified and directed by Engineer-in-Charge.

Supplying and laying tubes of light grade 50mm dia for electric cable protection complete all as specified.

Taking down old UNSV/Brunt all types of electrical cable from existing site all as directed by Engineer-in-Charge.

PVC insulated Unsheathed bright annealed bare copper conductor 2 core, 1.5 sqmm industrial cable and PVC insulated, PVC round sheathed multicore, industrial cable for voltage grade upto 1100v as per IS 694:1990 with complete accessories, Make Polycab/Havells/Anchor

PVC conduit pipe 1" dia, all as specified and directed by Engineer-in-Charge.

PVC Junction box suitable for 1" dia pipe all as specified and directed by Engineer-in-Charge.

L' Bend, 1" dia with fixing arrangements all as specified and directed by Engineer-in-Charge.

Replacement of LED 20 Watts post top Garden Light fitting with fixing arrangements.

Replacement of integral CFL post top lanterns fittings 1 x 18 Watts Black ABS Plastic spigot, spun aluminium canopy with opal acrylic diffuser and accessories.

Supply and Fixing Water Heater, storage type 25 ltrs capacity 5 star rating complete in all respect with 16mm dia nut bolt 04 Nos, grouting in PCC 1:2:4, type B-2, inlet and outlet connection, NRV steel tubing pipe and 15 mm dia steel tubing connector all as specified and directed by Engineer-in-Charge.

Cutting of existing pipe line (of any dia) in position for making branch connection complete all as specified and directed by Engineer-in-Charge.

GI Tubing, 15 mm dia, medium grade with all fittings including short length fixed in wall/floor etc complete all as specified and directed by Engineer-in-Charge.

Stop/Gate valve, 15mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both end for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge.

Bib Tap, 15mm dia, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing Heavy duty metallic exhaust fan of size 450mm sweep with louvers complete including PCC and Plywood packing work as per site requirement complete all as specified and directed by Engineer-in-Charge. Make : Havells/Orient/Bajaj/Crompton.

Supply and Fixing Heavy duty metallic exhaust fan of size 380mm/375mm sweep with louvers complete including PCC and Plywood packing work as per site requirement complete all as specified and directed by Engineer-in-Charge. Make : Havells/Orient/Bajaj/Crompton.

Supply and Fixing PVC plastic body exhaust fan of size 250mm/225mm sweep with louvers complete including PCC and Plywood packing work as per site requirement complete all as specified and directed by Engineer-in-Charge. Make : Havells/Orient/Bajaj/Crompton.

Supply, installation, testing and commissioning of Drinking Water purifier System (RO Plant) of capacity 50 LPH with one year warranty complete all as specified and directed by Engineer-in-Charge. Make : Kent/Liv Pure/Aqua Guard.

Supply and Fixing rotational moulded polythylene water storage tanks of capacity 250 ltrs and above (cylinderical vertical with closed top), tripple layer, hoisted mounted on Mild Steel Angle Iron (60mm x 40mm x 6mm) stand (including two coats of sythentic enamel paint over a coat of red oxide primer) of sutable height and width for smooth functioning/required gravity to RO Plant, including grouting/fixing with PCC on Bldg roof/Land, complete all as specified and as directed by Engineer-in-Charge.

R B TRADERS

M.S Sharma Enterprises

ANJALI CONSTRUCTIONS

M/S SHAMSHER ALI SUFI

Mehar Enterprises