Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.5 LAccepted-AOC 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹27.1 L+₹4,714 (0.17%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹27.5 L+₹43,446 (1.61%)Rejected-Finance 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹28.5 L
EMD Value
₹57,000
Closing Date
22 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) Utarlai PB No. 11 Barmer (Raj) 344001
REPAIR AND MAINT OF B VEHICLE, APFC PANELS AND CONNECTED WORKS UNDER AF STN UTARLAI
2022_MES_526898_1
8305/05/E8 dt 27 May 2022
Open Tender
Civil Works
Item Rate
270 days
Utarlai
As per NIT
7 documents required · 7 mandatory
₹500
GE (AF) Utarlai
₹57,000
Yes
3 Sept 2022
27 May 2022
28 Jun 2022
28 May 2022
22 Jun 2022
9 Jun 2022
60 days
Amount
Dismantling and disconnecting of unserviceable parts of Tata Mobile 207( Model of 2009,2011) /Tata Xenon (Model of 2017) reinstalling after repair/replacement of unserviceable parts complete to entire satisfaction of Engr-in-Charge. NOTE : Spare parts required to be replaced shall be measured and paid separately as mentioned here-in-below.
Engine oil
Oil filter element
Diesel filter element (set of two)
Air filter
Disc pad
Brake leather
Front wheel bearing
Rear wheel bearing
Front shokers
Brake oil
Door lock driver side
Door lock rear door
Counter Shaft
Top gear
Gear Bearing
Synchronizing ring
Gear Oil
Gear Oil Seal
Gear Joint Kit
Fan Belt
Water Body Assy.
Tie rod end
Bush kit complete
Ball joint assembly
Diesel pipe
Yoke and teeth
Shaft Nuts and Bolts
Mirror rolling machine
Engine mounting
U.J cross
Fly wheel Ring
Self stater assembly
Front Mirror with rubber beading
Head light assembly complete with tube
Main leaf spring
Leaf spring 2nd No
Leaf Spring 4th No
Leaf Spring clump
Nuts and Bolts with washer
Centre Bolts
U- Bolts
Wiper Arm & Blade
Alternator rectifier
Alternator rotor assy
Side view Mirror
Front indicator assembly
Rear indicator assembly
Ignition cum lock switch
Cluch cylinder assy upper
Clutch cylinder assy lower
Master cylinder assy
Clutch Plate
Pressure plate assy
Clutch release bearing
Dismantling of four wheels by greasing of four wheels including replacement of oil seal and reassembling complete all as directed.
Repair to gear by replacing main gear shaft, counter shaft, 2/3rd gear, syncronising ring
Repair of seat complete including replacement of best quality Rexign seat cover,foot mating , U foam & spring complete all as directed.
Alignment of wheel completely by computerized machine.
Cleaning of radiator assy complete by opening both tanks & cleaning the fins of the radiator by chemical and stopping the leakage by gas welding wherever required
Repair to FIP pump by over hauling the FIP and replacing all the spares of the FIP with the new spares and testing complete on machine all as directed.
Repair to Alternator by replacing carbon brush
Dismentling of Fuel tank assy complete from the vehicle and cleaning by pressure and refitting.
Denting and painting of complete vehicle body with approved colour of MES, including welding wherever required.
Carpet matting to vehicle after removing complete seat and assembly
Mud flap (set of 4)
Stearing cover
Foot Matting
Dismantling and disconnecting of unserviceable parts of Tata 407( Model of 2001) reinstalling after repair/replacement of unserviceable parts complete to entire satisfaction of Engr-in-Charge. NOTE: Spare parts required to be replaced shall be measured and paid separately as mentioned here-in-below.
Engine oil
Oil filter element
Diesel filter element (set of two)
Air filter
Disc pad
Brake leather
Front wheel bearing
Rear wheel bearing
Brake oil
Door lock Co driver side
Gear Bearing
Gear Oil
Gear Oil Seal
Gear Joint Kit
Fan Belt
Disel pipe
Dismantling of four wheels by greasing of four wheels including replacement of oil seal and reassembling complete all as directed.
Alignment of wheel completely by computerized machine.
Denting and painting of complete vehicle body with approved colour of MES, including welding wherever required.
Carpet matting to vehicle after removing complete seat and assembly
Mud flap (Set of 4)
Stearing cover
Foot Matting
Dismantling and disconnecting of U/S parts of Maruti Gypsy (Model of 2001 and 2003). Re-installing after repair/replacement of U/S parts complete to entire satisfaction of Engr-in-Charge. NOTE: Spare parts required to be replaced shall be measured and paid separately as mentioned here-in-below.
Wheel cylinder assy
Brake leather
Engine Oil
Oil filter element
Fuel filter
Shockers front
Replacement of rubber bush
Wheel Bearing outer
Wheel Bearing inner
Leaf spring 2nd No
Leaf Spring 4th No
Leaf Spring clump
Nuts and Bolts with washer
Centre Bolts
Main leaf spring
U- Bolts
Shockers rear
Wheel show cover
Transmission shaft with Yoke & Teeth complete.
UJ Cross
Dismantling of four wheels by greasing of four wheels including replacement of oil seal and reassembling complete.
Alignment of wheel completely by computerized machine.
Dismantling the load springs and refitting after repair and giving suitable tensioning complete all as directed.
Denting and painting of complete vehicle body with approved colour of MES, including welding wherever required.
Carpet matting to vehicle after removing complete seat and assembly
Mud flap (Set of 4)
Stearing cover
Foot Matting
Dismantling and disconnecting of U/S parts of Royal enfield (Model of 2005). Reinstalling after repair/replacement of U/S parts complete to entire satisfaction of Engr-in-Charge. NOTE: Spare parts required to be replaced shall be measured and paid separately as mentioned here-in-below.
Engine oil
Chain and chain sprocket.
Spark plug
Gear oil
rear light assy
Brake leather
Dismantling and disconnecting of unserviceable parts of EICHER ( Model of 2005,2009) and Eicher Pro (Model of 2017) and re-installing after repair/replacement of unserviceable parts complete to entire satisfaction of Engr-in-Charge.NOTE: Spare parts required to be replaced shall be measured and paid separately as mentioned here-in-below.
Engine Oil
Oil filter element
Fuel filter element (set of two)
Hydraulic Oil
Door Handle with lock assembly
Door Handle
Coolant
Front Indicating light assly with bulb
Wheel bearing
Wheel cylinder assy
Break leather
Side view mirror
Head light assy complete with bulb (Halogen type)
Bumper corner
Door strip set
Self Starter Assy
Mirror Rolling Machine
Window glass with beading
Alternator carbon bush
Rectifier assy.
Alternator bearing
Back light assy. complete
Indicator assy.
Cutout 12 volts
Flasher
Main leaf spring
Leaf spring 2nd No
Leaf Spring 4th No
Leaf Spring clump
Nuts and Bolts with washer
Centre Bolts
U- Bolts
Wiper Arm & Blade
Ignition cum lock switch
Cluch cylinder assy upper
Cluch cylinder assy lower
Master cylinder assy
Cluch Plate
Pressure plate assy
Cluch release bearing
Water Body Assy.
Tie rod end
Diesel pipe
UJ cross
Transmission shaft with Yoke & teeth complete
Counter shaft
Top Gear
Gear Bearing
Synchronizing Ring
Fuel tank cleaning
Gear oil
Gear oil seal
Gear Joint Kit
Main Gear shaft
1st gear shaft
2nd gear shaft
3rd gear shaft
Draglink rod
Repair of self starter by replacing of self bendex, carbon bush set, solenoid switch etc complete.
Dismantling the load springs and refitting after repair and giving suitable tensioning complete all as directed.
Repair to FIP pump by over hauling the FIP and replacing all the spares of the FIP with the new spares and testing complete on machine.
Dismantling of four wheels complete by greasing of four wheels including replacement of oil seal and re-assembling complete.
Setting of wheel alignment and setting of brake system including filling of brake fluid in master cylinder kit.
Repair of seat complete including replacement of best quality Rexign, U foam & spring complete all as directed.
Denting and painting of complete vehicle body with approved colour of MES, including welding wherever required.
Overhauling, greasing of King pin including replacement of oil seal complete.
Carpet matting to vehicle after removing complete seat and assembly
Mud flap (Set of 4)
Stearing cover
Foot Matting
Dismantling and disconnecting of unserviceable parts of Suzuki Dzire ( Model of 2020) and re-installing after repair/replacement of unserviceable parts complete to entire satisfaction of Engr-in-Charge.
Engine Oil
Oil filter element
Fuel filter element
Coolant
Note for Srl item No. 1.00 to 6.04:- (i) Make of matreial to be provided should be as per existing make and modal. (ii) Enge-in-charge will order a BOO for carringout the unserviceablelity of parts and accrodingly parts will be changes
Supply and fixing in replacement of maintenance free battery 12 volt 92 Ah including battery leads and initial charging of battery. Make:- Exide/ Amron.
Supply and fixing in replacement of maintenance free battery 12 volt 60 Ah including battery leads and initial charging of battery. Make:- Exide/ Amron.
Distilled water for battery
Supply, installation, testing and commisioning of Current transformer (CT) with ratio 100/5 or 200/5 Amp suitable for relay of APFC panel and including taking down of current transformer complete all as specified and directed by engineer in charge make- ALPHA/EESMA/AE
Supply, installation, testing and commisioning programming of APFC relay with LCD display, 6 to 10 step, 440V ,5 A in replacement to APFC panel including all connecting material and mounting arrangement in existing panel and including taking down of APFC relay with LCD display complete all as specified and directed by engineer in charge make-L&T/ schnider/EPCOS/Neptune/
Supply, installation, testing and commisioning programming of APFC relay with LCD display, 12 step, 440V ,5 A in replacement to APFC panel including all connecting material and mounting arrangement in existing panel and including taking down of APFC relay with LCD display complete all as specified and directed by engineer in charge make-L&T/ schnider/EPCOS/Neptune/
Supply, installation, testing and commisioning programming of APFC relay with LCD display, 14 step, 440V ,5 A in replacement to APFC panel including all connecting material and mounting arrangement in existing panel complete and including taking down of APFC relay with LCD display all as specified and directed by engineer in charge make-L&T/ schnider/EPCOS/Neptune/
Material and labour for Rewiring of APFC panel, dressing/insulating exposed busbars & cables, tightening of all nut bolts of bus bars connecting point etc and including taking down wiring of APSC panel complete all as specified and directed
Supply and fixing of (can) cylindrical type 440V capacitors to APFC panel and taking down capacitors complete all as specified and directed by engineer in charge KVAR rating are as below
1 KVAR . make- MEHVCSDY010A44 in Schneider or equivalent in HPL/L&T /Havells/ C&S /ABB/ EPCOS
2 KVAR .make- MEHVCSDY020A44 in Schneider or equivalent in HPL/L&T /Havells/ C&S/ ABB/ EPCOS
5 KVAR . make- MEHVCSDY050A44 in Schneider or equivalent in HPL/L&T /Havells/ C&S/ ABB/ EPCOS
10 KVAR .make- MEHVCSDY100A44 in Schneider or equivalent in HPL/L&T / Havells/ C&S ABB/ EPCOS
Supply and fixing in replacement 3 pole power contactor with AC 3 rating 6 Amp AC 1 rating 20 Amp MX type for APFC panel including taking down old unsv contactor complete all as specified and directed. make- ABB /Schneider/L&T
Supply and fixing in replacement 3 pole power contactor with AC 3 rating 18 Amp AC 1 rating 32 Amp MDX type for APFC panel including taking down old unsv contactor complete all as specified and directed. make- ABB /Schneider/L&T
Supply and fixing in replacement 3 pole power contactor with AC 3 rating 25 Amp AC 1 rating 32 Amp MDX type for APFC panel including taking down old unsv contactor complete all as specified and directed. make- ABB /Schneider/L&T
Supply and fixing in replacement 3 pole power contactor with AC 3 rating 32 Amp AC 1 rating 40 Amp ML type for APFC panel including taking down old unsv contactor complete all as specified and directed make- ABB /Schneider/L&T
Supply and fixing in replacement TP MCB 6 to 32 Amp C curve breaking capacity 10KA complete all as specified and directed make- ABB /Schneider/L&T
Supply and fixing in replacement TP MCB 40 to 63 Amp C curve breaking capacity 10KA complete all as specified and directed make- ABB /Schneider/L&T
Supply and fixing in replacement phase indicator LED lamp complete all as specified and directed.
Supply and fixing in replacement digital function meter 3 line seven segment display 3 phase 3 or 4 wire CT operated of class 0.5 accuracy with RS485 and THD for V&I . Size 96x96 sqmm flush mounted including taking down old unsv complete all as specified and directed.
Material and labour for painting of APFC Panel with one coat of synthetic enamel paint of approved color, writing letter on APFC panel(by using appropriate colour,size/ font stencil) complete all as specified and as directed by Engineer-in-Charge
Material and labour for welding/ brazing for door/ hinges/lock etc for APFC panel complete all as specified and directed.
M&L for earthing in replacemet complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mmx4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 40 mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & tested complete. Note 1. Following items deemed to be included in quoted rates (a) Earth electrode (b) Main earth lead from earth electrode to test point and further to equipment to be earthed upto 7.5 mtr. ( c) M&L for connecting earth electrode and earth lead as specified (d) adequate qty of charcoal ,dust and commom salt as per direction (e) All labour involved incl testing of earth network (f) Excavation and earth work or drilling hole for electrode in any type of soil/strata (G) PCC pit and CI Cover (h) Funnel with watering pipe, wiremesh and copper lugsetc. as specified (j) GI protection pipe of size as specified for protection of earth lead from mechanical injury or tempring Note 2. On testing after completion if the desired earth resistence is not obtained the earthing will be re carried out at no extra cost
M &L in repalcement of 25X4mm galvanised iron strip for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.as complete all as specified and directed.
Labour for Internal Cleaning of APFC panel for dust/spider web complete all as specified and directed.
Surface Dressing / Cleaning of Surrounding Area of Two Pole / Four Pole / Sub Stn structure including removing of tree brances, small trees plants bushes etc complete all as directed by Engr-in-Charge
Supply and fixing in replacement of moulded case circuit breaker, 415 Volts, 4 pole,Ics=100%Icu, adjustable overload setting 0.8-1.0 x In and short circuit setting 6-10 x In with thermal magnetic settings including spreader terminal and connecting items Confirming to IS/IEC 60947-2 having following capacities :-
MCCB 250 Amps 36 KA
MCCB 200 Amps 36 KA
MCCB 160 Amps 36 KA
Supply and fixing in replacement of moulded case circuit breaker, 415 Volts, 4 pole,Ics=100%Icu, adjustable overload setting 0.8-1.0 x In and short circuit setting 6-10 x In with thermal magnetic settings including spreader terminal and connecting items Confirming to IS/IEC 60947-2 having following capacities :-
MCCB 125 Amps 36 KA
MCCB 25-100 Amps 36 KA
Supply & Laying, Jointing and testing underground armoured cable LT XLPE insulated cable 1100 Volts PVC bedded galvanised steel strip or wire armoured electric LT UG cable heavy duty with multi stranded aluminium conductor laid in trenches / walls/ ducts passing through pipe cable of following size complete including taking down old unsv cable all as specified:-
95 Sqmm 3.5 core
50 Sqmm 3.5 core
25 Sqmm 4 core
16 Sqmm 2 core
10 Sqmm 2 core
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 mtr depth for laying of cable and getting out in any type of soil complete all as specified and directed.
Removing of excavated surplus soil not exc 50m and posited where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm thick complete all as specified and directed.
Providing dry tibba sand in trenches as sand cushioning to U/G cable including pinning down of sand in layer all as specified (Note :- Punned thickness shall only be measured ans paid).
S & L stone patti quarry faced jodhpur type 4 to 5 cm thick and 25 to 30 cm wide putting on cable abutting to each other for cable protection all as directed.
laying of old serviceable stone patti quarry faces jodhpur type 4 to 5 cm thick and 25 to 30 cm wide (retrived during excavation for cable ) putting on cable abutting to ech other for cable protection all as directed.
Devi Engineeing
National Rewinding Works
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .