REPAIRS TO DOORS WINDOWS, VENTILATORS, WARDROBE, CUPBOARD , WALL CLADDING AND FALSE CEILING AT ZONE-I UNDER GE BRICHGUNJ , SRI VIJAYA PURAM

Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutters from the frames) including cutting holes to facilitate the taking down and making good the surfaces etc complete all as specified and as directed.

All as per Item No.1.00 above but exc. 1.5 Sqm and n. exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description n.exc 1.00 Square metre each complete all as specified and as directed.

Taking down shutters of any description exc 1.00 Square metre and n.exc 2.00 Square metre each complete all as specified and as directed.

Taking down shutters of any description exc 2.0 Square metre each complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/ Chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900N (Edge), min compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

All as per Item No.7.00 above but 35mm thick for skeleton shutter complete all as specified and as directed.

S&F Factory made uPVC Frames 60mm x 58mm white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and as directed.(Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.)

S&F Factory made uPVC white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with mitlti chamber, frame 60mm x 58mm, sash 60mm x 78mm. T profile (One vertical length in between two shutters) 60mm x 74mm. Glazing bead 35mm x 20mm will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame 28mm x 21.5mm, sash 31mm x 27mm, T profile 27mm x 17mm to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle (02 Nos), tower bolts (02 Nos), sliding bolt (01 No), Hinges (03 Nos) made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass complete all as specified and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)