Replacement of old OH LT Lines alongwith UG Cables and Control Panels at ARSU

Supply and fix replacement of LT OH lines on existing poles with ACSR conductors size 4 of 1x2.11mm (Squirrel).

Supply and fix replacement of LT OH lines on existing poles with ACSR conductors size 3 of 6/1x2.59mm (Weasel), 1 of 6/1x2.11mm (Squirrel)

Supply and fix replacement of LT OH lines on existing poles with ACSR conductors size 2 of 6/1x2.11mm (Squirrel).

Supplying and erection replacement of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Supplying and erection of 75 mm X 90 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required

Supplying and erection of 100 mm X 65 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply, install , test & commissioning of LT panel board, outdoor cubical type, floor/wall mounted on MS angle iron frame of size 50 x 50 x 6 mm thick, made out of 3.15 mm thick CRCA sheet powder coated for load bearing members for double doors both side openable and covers, Suitable for 3 phase 4 wire 50 cycle 500 Volts system weather and vermin proof, including internal wiring with suitable size copper cable, heat shrinkable sleeves, chromium plated brass cable glands, lugs, 300Amps Busbar and necessary excavation earth work, PCC grouting etc.. to comprising of the following, with and including taking down old unserviceable burned out/damaged panel, incl removing of old cable connection after installation of LT Panel with reconnection of old cable complete all as directed by Engineer -in- Charge . a) MCCB 250 Amp, 4 Pole, 35 KA, 415V, 50Hz (Main Incomming ) 01 No b) MCCB 100Amps , 3 Pole, 16 KA, 415V, 50 Hz (Outgoing) 02 No c) MCCB 63Amps 3 Pole, 16 kA 415V, 50Hz (Outgoing) 04 Nos d) Volt meter, Ampere meter, Indicator Lamp complete - 01 Set

Supply, install , test & commissioning of LT panel board, outdoor cubical type, floor/wall mounted on MS angle iron frame of size 50 x 50 x 6 mm thick, made out of 3.15 mm thick CRCA sheet powder coated for load bearing members for double doors both side openable and covers, Suitable for 3 phase 4 wire 50 cycle 500 Volts system weather and vermin proof, including internal wiring with suitable size copper cable, heat shrinkable sleeves, chromium plated brass cable glands, lugs, 250Amps Busbar and necessary excavation earth work, PCC grouting etc.. to comprising of the following, with and including taking down old unserviceable burned out/damaged panel, incl removing of old cable connection after installation of LT Panel with reconnection of old cable complete all as directed by Engineer -in- Charge . a) MCCB 160 Amp, 4 Pole, 35 KA, 415V, 50Hz (Main Incomming ) 01 No b) MCCB 100Amps , 3 Pole, 16 KA, 415V, 50 Hz (Outgoing) 01 No c) MCCB 63Amps 3 Pole, 16 kA 415V, 50Hz (Outgoing) 02 Nos d) Volt meter, Ampere meter, Indicator Lamp complete - 01 Set

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 35Sqmm and upto 120Sqmm

Supply and replacement of LT Ug Cable PVC Shethed XLPE Cable 50Sqmm 3.5Core

Supply and replacement of LT Ug Cable PVC Shethed XLPE Cable 70Sqmm 3.5Core

Supply and replacement of LT Ug Cable PVC Shethed XLPE Cable 95Sqmm 3.5Core

Supply and replacement of LT Ug Cable PVC Shethed XLPE Cable 120Sqmm 3.5Core

Supply and replacement of Alluminium Thimbale of size 120/150/185/240/300/400 Sq mm complete all as spd and directed.

S G Enterprises

M/s Pradip Bajaj