Construction of Science Lab, Art Craft Room and Library Room at Govt. High School, Kund Khanyari, Zone Pouni, District Reasi

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 Osqm on plan, depth upto 1.5 mtr including disposal of excavates earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) Crushed

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centenng, shuterring, finishing and reinforcement- All work upto plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Crushed with 20% boulder

Centering and shuttering inclduing strutting~ propping etc and removal of form work for foundations footings. Bases of columns

Centering and shuttering including strutting~ propping etc and removal of form work for - Columns, piers, abutments, pillars, posts and struts

Centering and shuttering including strutting, propping etc. And removal of form for- Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting, propping etc and removal of form for- Lintels, beams, plinth beams, girders, bressumers and centilevers.

Centering and shuttering including strutting, propping etc and removal of form for- Edges of slabs and breaks in floors and walls. Under 20cm wide

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level (by manual means)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for seperately): Sal wood

Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. Presssed Butt hinges bright finished of required size with neccesary screws excluding panelling which will be paid for serparately, all complete as per direction of engineer- in charge. Second class deodar wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grovees or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Coir veneer board (conforming to IS 14842) 12mm thick.

Providing and fixing 35mm thick wire gauze shutters using galvanised M.S. Wire gauze of average width for aperature 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws: Second class deodar wood.

Providing and fixing 35mm glazed shutters for doors, windows and clerestory windows using 10 kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 50x12mm second class teak wood

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size).

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete: Size of tile 60x60cm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 em 1:3:6 mix ( 1 cement : 3 coarse sand : 6graded stone aggregate 20 mm nominal size )

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour orshade with necessary screws etc. complete : 150x10 mm

Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10mm

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 asper IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete: 125mm

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. Complete: 100mm

Finishing walls with water proofing cement paint of required shade. New work (two or more coats) applied @3.84 kg/10 sqm

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.

White washing with lime to give an even shade. New work (three or more coats)

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Electric wiring with 1.5 sqmm copper cable including 20mm dia 2mm thick PVC 5 amp with sunken box and connection to the main pole complete as directed by engineer-incharge.

Carriage of material by mechanical transport including loading unloading stacking complete lead of sand 65 km and manual labour 200 mtr

Carriage of stone aggregate mechanical transport including loading unloading stacking complete load upto 50 km and manual labour 200 mtr

Carriage of brick by mechanical transport including loading unloading stacking complete lead upto 90 km and 200 mtr manual labour

Carriage of cement by Mechanical Transport including loading, unloading stacking complete lead upto 20 km and manual labour 200 mtr .

Suresh Kumar

M/S KULDEEP RAJ PANDOH&SONS