PROVN OF TOILET BLOCK AT FORT AREA NAGPUR UNDER GE KAMPTEE

Surface excavation in soft /loose soil n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches n exc 1.5m in deepth and 1.5m in width and getting out in hard dense soil complete all as specified and as directed.

M&L for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) in foundation, mass concrete and filiings complete all as specified and directed.

M&L for Form work to side of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and simillar work complete all as specified and as directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in footing, foundation,beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L Form work to side of columns and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in columns and pillars etc complete all as specified and directed.

M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs floor slabs, landings and similar work n.exc 200mm thick. (horizontal or sloping) complete all as specifed and directed.

M&L for providing reinforcement cement concrete type A1 1:1.5:3 (Nominal Mix) 20mm stone Aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L Form work to chullah hoods, chajjas, troughs and similar items including edges and simillar work complete all as specified and directed.

M&L for providing RCC 1:1 1/2:3 type A-1 (nominal mix) as in chajja etc complete all as specified and directed.

S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

S&F milt steel TMT bars 6 to 8 mm dia of bar , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

S&F mild steel TMT bars 8 to 10 mm dia a as in stirrups, spacers and binders complete all as specified and as directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 17 here-in-above but half brick wall in CM 1:4 complete all as specified and as directed.

M&L for Rendering 10mm thick in cement mortar 1:6 , finished even and smooth without using extra cement complete all as directed.

M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM ( 1:3 ) finished even and smooth (without using extra lime or cement) on Ceiling complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC finished even and smooth without using extra cement complete all as specifed and directed. (Note : WPC will be measured & paid separately).

Supply only Liquid water proofing compound of approved quality complete all as specified and as directed.

M&L for preparation of new surface of wall and applying two coats of oil bound distemper over a two coat of birla white care putty complete all as specified and directed

Material and labour for applying two coats of oil bound distemper on ceiling over a coat priming paint including preparation of new surfaces complete all as specified.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for Anti - termite treatment to the under plinth protection, top surface of filled earth, bottom and sides of excavation at rate of 5 ltr of emulsion per square meter of surface area complete all as specified and as directed.

M&L for ATT to treating the backfill in contact with foundation at the rate of 7.5 ltr of emulsion per square meter of verticle surface complete all as specified and directed

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and as directed.

M&L for non skid colour ceramic tiles 7 -8 mm thick area of each tiles exc 0.06 sqm but nexc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick sceed bed in CM 1:6 complete all as specified and directed.

M&L coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 10 mm thick (square or rectangular) polished, dark shed area of each tile exc 0.42 but not exceeding 1.0 sqm in floors etc set and jointed in neat cement slurry and pointed in site or colored cement to match over 15mm cement screed bed in cement mortar 1:6 complete all as specified and as directed.

M & L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, suppling and fixing in opening complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 100mm long medium weight stainless steel butt hinges complete all as specifed and as directed.

S&F Extruded Aluminium alloy handles, fabricated type anodised of 150mm long complete all as specifed and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed of 150mm long complete all as specifed and as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specifed and as directed.

S&F powder coated aluminium frame (powder coated ) for doors,window,ventilator with one or more rebates including arrange ments of lovers joining cleat for fixing etc complete all as specified and as directed.

S &F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F Towel ring square fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including 6 mm dia 50 mm long fixing Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut) with Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless, syphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets fixed in repairs with 32 mm PTMT Flush pipes to pedestal pan, including all joints complete all as specified and as directed.

S&F 32mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in any position complete all as specifed and directed.

S&F Vitreous China urinals, full stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F 15 mm bore Urinal spreader of CP for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed.

S&F PVC connection 15mm size, 600mm long with PTMP nuts both side complete all as specifed and directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed of 1000 litres capacity.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia complete all as specifed and directed.

S&F Soap dish (polycarbide) fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F in repairs single lever Basin Mixer without popup waste with 450mm Long braided hoses complete all as specified and as directed.

S&F two way bib cock wall flange complete all as specified and as directed.

S&F Angle cock complete all as specified and as directed.

S&F hand shower (health faucet) (ABS Body) with 1 mtr long easy flex Tube in chrome finish and wall hook complete all as specidied and directed.

M&L for pre- polished granite slab machine cut of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing(Granite finish) with suitable grinding stones complete all as 'specified and as directed.

M & L for machine cut cudappa stone slab 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

S&F Vitrous china wash basin, size 505x405x185mm, under counter basin type fixed in granite or table complete all as specified and directed.

M&L for 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F bottle trap 7''/12'' as required complete all as specidied and directed.

M&L for 3.2mm dia Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm'laid in trenches complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and as directed.

M&L 15mm GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor complete all as specifed and directed.

M&L 20mm GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor complete all as specifed and directed.

S&F GI water tubes of bore 25 mm dia tubes medium grade with all fittings and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F powder coated aluminium frame for window, ventilator with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated aluminium ventilator shutter, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screw etc complete all as specified.

S&F 4mm thick figured glass and glazing with rubber beading and aluminium glazing bar in each panel but nexc 0.5 sqm each complete all as specified and directed

M&L for laying 150 mm dia Salt glazed stone ware drain pipes of grade ‘A’ and jointed in cement mortar and tested on completion all as specified and as directed.

M&L concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested. of 150mm bore complete all as specifed and directed.

S&F grating dome 100mm dia of PTMT (Min weight 25 gms) complete all as specified and as directed.

S&F Cast iron floor trap 100 mm dia , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F 8 mm thick PVC flooring Glory Series+ 8mm thickness PVC VINYL sports flooring FIBA certified manufacturer with premium quality 100% recyclable product.material should be free from shoes mark problem and making the flooring easy to clean and maintain, and weight 4.95 Kg/m2 shock absorption 36% , ware layer 1.5mm. PVC weding bar of matchng colour using hot air gun line marking incl fixing with suitable material as per manugacturing instructions included using adhesive/other suitable material to maint tolerance up to 5mm even and smooth for exisitng sufrace (where as required) complete all as specified and as directed.

S&F turbo ventilator 21" throat, high grade aluminum 36-42 rolled formed blades , permantely lubricated and sealed weight approx 5 to 8 Kg , wind driven and corrosion proof, all as fixing manufacture instructions complete all as specified and directed

S&F PVC (SWR) bends any radius of 110 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) 'S/P' trap 110/110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 110mm bore complete all as specified and as directed.

M&L for loose filling with aggregate of gauge 80 to 150mm of broken bricks complete all as specified and as directed.

M&L for glazed Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade laid over a layer of fine river sand, watering and consolidating complete all as specified and as directed. (Note: Sand will be measured paid for seperately under respective item supplied only).

Supply only river bed fine sand for screed bed for paving flooring complete all as specified and as directed.

M&L for PCC (1:2:4) type B0 using 20 mm graded agg as in coping etc inclduing necessary form work complete all as specified and as directed.

M&L for PCC (1:2:4)) type B1 using 40 mm graded agg as in benching etc complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and as directed.

All as item per No. 87.00 above but add or deduct for each 25mm girth or part thereof over or under 30 cm complete all as specified and as directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil/water based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick plaster in CM 1:3 and aluminium paint over membrane complete all as specified and directed.

Supply only liquid water proofing admixture of make-pidilite or equivalent complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel 91/1 round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as orginal formation complete all as specified and as directed.

M&L precast cement concrete 1:2:4 type B1 (using 20mm graded aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 . (reinforcement measured and paid sepratly) complete all as specifed and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified for one light/fan point controlled by one, one way switch, complete all as specifed and as directed. Note :- Cost of 2.5 sqmm copper cable of size 2.5 sqmm provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate.

All as per item Sl No 93 above but One 3 pin 6 amp socket outlet point on the same board with other switches, complete all as specified and directed.

S&F for switch modular type single pole one way 6 amp 230 volts grade on top covers suitable for modular switch boxes complete all as specified and directed.

S&F for socket outlet 3 pin 6 amp flush mounting modular type, 230 volts grade on top covers complete all as specified and directed.

Supplying & fixing for ceiling rose PVC Polycarbonate isolated body, three terminals, complete all as specified & directed.

Supplying and fixing LED tube light fitting 20 watt, 4 feet (cool/warm white), surface / wall mounted with polycarbonate housing, high optically efficient polycarbonate diffuser, CRI ≥ 80, PF ≥ 0.95, lumen output ≥ 1900 Lm, Colour temp 3000/6500K, luminous efficiency > 100 Lm/watt, electrical insulation class 1, operating voltage 140-270, THD <20%, Surge protection 2.5 KV, 50000 burning hrs (min), complete all as specified and directed.

S&F surface mounted mirror light of capacity 5 watt, , 230 volts with CRCA housing with and intregrated electronic driver with luminous efficacy not less than 120 lumen/watt connector block etc, complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor with flexible conduit of suitable size complete all as specified and as directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including connecting with 3 core 1 sqmm copper conductor cableincluding mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed.

Supply and fixing Exhaust Fan high quality engineering plastic of size 250 mm sweep (copper wound), power consumption 35 watt, 1200 RPM, Air delivery 860 cum/min, 230 V-240V, 50 HZ, noise level not more than 50 dB with approved colour and with louver shutter complete including aluminium wire net frame on the exhaust side (outer surface of wall) including electrically connecting from ceiling rose to fan connector with 0.75 sqmm flexible copper conductor three core with suitable size flexible PVC conduit complete all as specified and directed.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 08 way with 200 Amp rated bus bar flush /surface mounting double door.

Supply and fix MCB singlele pole & neutral 240 volt 6 to 40 amps 10 KA, C series complete all as specified and directed.

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, C Series complete all as specified and directed.

Earthing Complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.5 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using GI wire 4 mm by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron medium grade pipe 40mm bore in wall/floor/and GI Pipe 20 mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009 ( Part-I). Notes : (a) The unit rate shall include for GI protection pipe, GI watering pipe, wire mesh, funnel and excavation, RCC pit cover, test point, galvanised iron strip from top of earth plate upto 7.5 metres above ground level and if GI protection pipe is less than 7.5 metres, no price adjustment shall be made. (b) PCC pit shall be provided at least 50cm away from the earth pit and not just on the earth pit and extra cost of additional length of water pipes and fittings, junction, elbow etc shall be deemed to be included in the unit rate. (c) If the testing result of earthing work is not found satisfactory then the contractor shall do another earthing work at his own cost and nothing shall be permissible on this account.

Supply and fix Double wall corrugated High Density Polymer Ethyl(HDPE) pipe for laying of electric cable of size 50 mm outer diameter and 38 mm inner diameter with IS 14930 (part 2) 2001 and 6mm thickness laid in trenches(Including cutting of roads or any others hard surfaces and making good disturbed surfaces) , wall, poles including bends, sockets and other connected accessories complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ISI marked confirming to IS 7098 Part-I of size 10 sq mm 4 core and laid in trenches/ducts/pipe or on poles, complete all as specified and directed.