REPAIR MAINT TO FLOORING PLASTERING PLINTH PROTECTION CHAJJAS JOINERY AND ALLIED WORKS IN SINGLE SC AND JC ACCN AT AWC UNDER GE (AWC) MHOW

Amount

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, at any description and height etc. and removing of the rubbish complete all as specified .

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth complete.

M & L 10 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair complete.

Complete removal of existing treatment from plastered wall surfaces complete all as specified

M&L1mm thick wall care putty on internal/external wall complete all as per manufracturer instructions all as specified

M & L for applying two coats of oil bound distemper over a coat of primer on old prepared of wall surfaces of internal wall all as per specified and directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared newly plastered surfaces of internal wall all as per specified and directed.

M&L preparation of new plastered / unplastered surfaces of walls and applying two coats of cement base paint , white or tinted including and washing floors, etc. , of drops and splashes complete all as specified .

M&L two coats of exterior emulsion paint ( Apex or weather coat) with 1mm thick exterior putty , white or tinted on old/new surfaces of walls including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

M&L Rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters ; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290( Gde-E-165) complete all as specified.

S & F Framed work as in grills for balcony, of MS tube for top rail and MS square bars for as guard bars, or rolled section as in sunshade, side supports or any situation of work etc, revited or forged in to spikes and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.

Dismantling Plain or corrugated Asbestos sheet, steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings

S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated/plain sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa, and finished with resin coat on both surfaces as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws complete all as specified.

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.

Demolition of un-reinforced cement concrete in ground floors and pavigns not exc.15 cm thickness. (Below or abve ground level).

M&L 75mm thick PCC type C-2 (1:3:6) (using40 mm graded crushed stone aggregate as in plinth protection laid in panels, finished even and smooth without using extra cement.

Dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match also in patches over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed.

Material and labour Non-skid coloured Ceramic tiles 7 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in on vertical surfaces as in dados,skirting etc, set & jointed in neat cement slury over and including 10 mm thick bedding layer of cement (1:4) pointed with white/coloured cement to match .

M&L glazed ceramic Coloured tiles, 300mmx200mmx6.5mm/300x450x7mm thick, on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match also in patches complete over & including 10mm thick screeding in CM 1:4 all as specified.

M&L Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4

M&L Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces as in dados,skirting etc, set & jointed in neat cement slury over and including 10 mm thick bedding layer of cement (1:4) pointed with white/coloured cement to match .

Dismantling of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons etc. complete all as specified and directed.

M&L 18-20 mm thick Granite stone slab of approved colour ( of any type) work ( table rubbed and polished to mirror finish ) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

M&L Machine cut kota slab flooring 20-25 mm thick over & including 15 mm thick screed bed of CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L Machine cut kota slab flooring 20-25 mm thick in riser of steps, skirting, dado and piller laid over & including rendering of CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for bullnosing / rounding to exposed edges of stone slab ( any type) and polishing to match the adjoining surfaces complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) complete all as specified.

S&F Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S&F 2nd class HW rail and style ,35 mm thick Factory made plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS: 1003 ( Part I) complete all as specified.

M&L 35 mm thick factory made door shutters made out of second Class hard Wood , Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/gauze complete all as specified.

M&L preparation of new wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Supply & fixed in repair galvanised mild steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Supply only galvanised mild steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S & F powder coated aluminium sliding glazed windows with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos

S&F butt Hinges, medium weight, cold rolled mild steel, 100 mm size, ISI marked complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt, ISI marked complete all as specified.

S&F Aluminium handles, cast type anodised 'D' shaped , 150mm long ISI marked all as specified.

S & F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed.

S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed.

S & F in repair aluminium(extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F 3 layer Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 250 ltr but not exc 500 ltr complete all as specified and directed.

S&F 3 layer Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 500 ltr but not exc 1000 ltr, complete all as specified and directed.

Supplu only 500/1000ltr PVC water tank cover of any description complete.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 25mm-455 gms.) complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

S & F Anodised aluminium sanp grid 605 x 605 mm frame work for false ceiling, complete all as specified and directed

S & F hangers 6 mm dia G.I.(upto 1200mm lenth) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. falt 40x3mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete all as specified and directed

M & L exposed metal frame ceiling with 6 mm th calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm grid complete all as specified and directed. (Note :- Frame work for ceiling shall be measured and paid seprately)

S & F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyingP VC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door shutter 30mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyingP VC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardan and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F in repairs powder coated steel peg set having 06 Nos pegs fixed to wall with CP Mild steel screws and PVC rawl plugs complete all a specified.

S&F ( in repairs) Stainless steel sink with draining board , made out of 1.00 mm thick sheet (ISI Marked) for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx 330mmx160mm complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., and fixing of seat cover complete fixed in repairs complete all as specified.

S&F PVC connection 15mm bore 600mm long with PTMT nuts at both ends complete all as specified and directed.

S&F in repair low dencity polyethelene waste pipe 32mm bore and 1 mtr long complete .

S&F ( in repairs) Low level flushing cistern, moulded from virgin poly propylene Make Parry ware Brand Slimline Single flush including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including CI cantilever brackets, 32 mm dia brass Chromium plated waste fittings with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified.

S&F in repair Pillar taps,with long thread fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified.

S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified.

S&F ( in repairs )15mm bore Cast copper alloy Chromium plated Angle stop cock( one way) long thread with wall flange , screwed down , high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified .

S&F ( in repairs) CP Angle stop cock( two way) CAT No. EC-0599 of Plumber, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed C complete all as specified .

S&F ( in repairs) Bidet spray ( Health faucet) with 1 metre extendable metal tube and holder completed Make: Plumber Cat No. IT-1904 or equivalent of other Make Specified .

S & F in repair brass chromium plated shower rose with shower arms with swivel joints including fixing to steel pipe or union, complete all as specified and directed. Make ;Plumber SB-0102 or equivalent in Marc

S&F in repair Chromium plated fancy long body Bib taps , cast copper alloy , screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified of Make Plumber Cat No. EC-0203 or equivalent of other make specified.

S&F in repair 15 mm bore dia cp bib tapswith long thread cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe .

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.

S&F in repair factory made PVC side laminated shelf /partition of required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC Sheet of density 600 Kg/Cum manufactured by ISO 9001 - 2015 Cerfified campany , using solvent cement etc.complete as direction of Engr-in-Charge manufacturers specification and drawings.

M & L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete, foundation and any other location etc. and including demolition of PCC, complete all as specified and directed. Note : Sand cushioning shall be measured seperately.

M & L machine pressed precast concrete 60 mm thick glossy interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape as approved, complete all as specified and directed. (Note : Sand cushioning shall be measured separately) .

S&F in repair machine pressed precast concrete 60 mm thick glossy except interlocking paver block M-35 Grade to IS 15658-2006, with grey cement and no pigment laid over dry sand cushioning, filling of joints with sand including demolition of stone slabs and tiles of any description or thickness etc. colour and shape as approved, complete all as specified and directed. (Note : Sand cushioning shall be measured separately) .

M & L sand filling under floors or interlocking tile or in foundation including watering and consolidation complete all as specified and directed

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F Outer dia 16mm CPVC brass elbow

S&F Outer dia 20mm CPVC brass elbow

S&F Outer dia 16mm CPVC brass Tee

S&F Outer dia 20mm CPVC brass Tee

Taking up or down 15mm steel/CPVC tubing and connections, including cleaning for re fixing or removal to store complete all as specified.

Taking up or down 20mm steel/CPVC tubing and connections, including cleaning for re fixing or removal to store complete all as specified.

supply only brass spandle for 15mm bore CP pillar tap, bib tap,wall mixer, basin mixer and any type of plumbing fitting complete all as spesified and directed.

Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.

S&F 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with oil putty at any height in portion (part) complete all as specified.

S&F 3 mm thick figured glass, pin head type in squares not exceeding 0.50 sq.m. in each pane , fixed with oil putty at any height in portion (part) complete all as specified.

S&F in repairs Door seal of superior quality made out of aluminium anodised ( 20mmx1.5mm strips) materials and fixed to door shutters and CP MS screws 25 mm long complete all as specified.

S&F in repairs corner glass shelf 250mm (10'') long complete as per sample approved by AGE B/R-III complete all as specified.

S & F in repair shelf in long size fixed with and including chromium plated brass screws and wooden/plastic cleats.( Min wt 300gms) Make :Prayag or equivalent

S&F (in repairs) 25 mm dia chromium plated fancy type drapery curtain rod with a pair of brackets and finial and fixed complete all as specified.

M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm mm complete all as specified and directed.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

S & F in repair brass spandle for any type of bib cock/ pillar tap/mixer/angle cock/stop cock complete all as specified and directed.

M & L for Roughening / taking down existing roof treatment surfaces including plaster over old concrete roof by picking, sweeping clean and washing down with water to remove dust etc. all as specified and directed.

M & L Brushing neat cement slurry with 3 Kg of cement per Sqm for bonding of old concrete surface to new concrete/plaster surfaces complete.

M & L Cutting out cracks to 6 mm wide 'V' section in existing roofs or terrace (if cracks > 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD,, water and cement in the proportion of (1:4:7) by weight mix or as per manufacturers instructions all as specified and directed complete.

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

M & L 10 mm thick rendering in CM (1:3) mixed with integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified.Note:- Liquid WPC shall be measured and paid separately.

Supply only liquid water proofing compound.Make:- SUPER LATEX or DR. FIXIT of PIDILITE INDUSTRIES LTD and PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or equivalent make as approved by GE.

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete. (i) cleaning of new rendered surfaces properly and drying the surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm (iii) Laying 3 mm thick APP modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by 'torchon' method. (iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats .Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd /STP Ltd all as specified and as manufacturer instruction complete. as per manufacturers instruction.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provider for.

M&L for mass cement concrete type E2 1:5:10 as in suken floor

M & L for applying one prime coat acrylic polymer modified water proofing coating(Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed by engineer-in-charge.Make:- Fosroc,Sika,Dr fixit Note :-1 . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. 2. A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. 3.The rate quoted by the contractor shall include all the provision mention in this item including notes. 4. Applying 15-20mm thick protection plaster 1:3(Cement : Sand) ration on vertical and horizonal areas admixed with Dr.Fixit Pidiproof LW Plus(Conforming IS 2645 2003) @200ml per bag of cement.

RK CONSTRUCTION

PREMCHAND BHAWANI SAHAI

yash enterprises

Jamna Constructions

J B CONSTRUCTION AND DEVLOPERS