REPAIR / MAINT TO CEILING, WALL PANELLING, FLOORING AND HERITAGE FINISH AT CHQ, TRG WINGS FOR HC, SC, JC STUDENT OFFICER AND ASSOCIATED AREA UNDER GE(AWC) MHOW.

Amount

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

S & F Anodised aluminium sanp grid 605 x 605 mm frame work for false ceiling, complete all as specified and directed

S & F hangers 6 mm dia G.I.(upto 1200mm lenth) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. falt 40x3mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long and expansion hold fasteners 12.5 mm dia. 40mm long complete all as specified and directed

M & L exposed metal frame ceiling with 8 mm th calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600 mm grid complete all as specified and directed. (Note :- Frame work for ceiling shall be measured and paid seprately)

S & F 8mm thick Calciume silicate perforated boards for insulation and accoustic purposes 595 mm x 595 mm in size fixed to timber frame work or with staples on snap grid on wall/ceiling surface complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet including PVC sheet fillet of width 35 mm fixing on to wall to make PVC frame for fixing of wall paneling with solvent cement etc. complete all as specified and directed.

Taking Down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each incl removal from site all as specified

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 sqm but n.exc 4 sqm each and removal from site ,all as specified and directed

Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be following specification complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos.

S & F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick. (e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality makae and type as approved by Engr-In-Charge/GE openable both from inside & out side -01 Nos per shutter.

S & F 35mm th flush shutters, solid core construction, with particle board core with both faces are covered with decorative face veneer with lipping/frame to match, complete all as specified and as directed

S&F aluminium handles, size 150 mm cast type, anodised complete all as specified and directed.

S & F aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed.

S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and directed.

S & F in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed to frame, complete all as specified and directed.

Dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L vitrified ceramic tiles mat finished light shade 09 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed

Description same as per Item No. 18.00 but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, complete all as specified and directed

Description same as per Item No. 20.00 but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, complete all as specified and directed

M&L Glazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4, complete all as specified and directed.

M & L brushing neat cement slurry with 3.0 kg of cement per sq. metre complete all as specified and directed.

M & L 25mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) As in leveling coarse in floor including demolition of PCC complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in CM 1:4 all as specified

M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified & directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & directed.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railing upto 60 cm in height, coping, kneelers, apex stones bed plates, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary use and waste of form work complete.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 15 mm thick in cement mortar 1:4 in two layers, 10 mm thick plaster in first coat with WPC and second coat of 5 mm thick with WPC as per manufactures instruction, surfaces, surfaces finished even and smooth without using extra cement , complete all as specified and as directed. (WPC will be measured and paid separately)

Supply only liquid water proofing compound all as specified and directed

Complete removal of exisiting wall treatment on old plaster or concrete surface by scraping tin plate, leaned of all laitance , loose material, oil grease by mechanical means such as wire brushing & shot blasting , finally vacum cleaning of all loose solid particals complete all as specified and directed.

M&L for applying 1 mm thick wall care putty on wall on internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed.

M&L preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of priming coat complete all as specified & directed.

M & L heritage regular flakes finish which is made from china clay, pigments homo polymer emulsion and bonding agent Acrylic emulsion top(glossy/ matt )finished based on solvent based polymer 0.8mm to 1.2mm th single coat as per approved shade, as per manufactures instructions and applying on plaster/unplaster surfaces of walls, columns, soffits and chajja etc complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fitting ,heads,shoes,bends,swan-necks,etc including removal from site all as specified.

S & F PVC pipes 160 mm bore single socketed in any length with rubber ring joint and fixed to walls incluidng clamping complete all as specified and directed.

S & F PVC bends 160 mm bore any radius with solvent cement joints, fixed complete all as specified and directed.

M & L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, surface finished even and fair without using extra cement incl necessary use and waste of form work complete, & incl demolition of PCC complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, framed work in any position complete all as specified & directed.

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified & directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified & directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Fibre glass reinforced translucentbcorrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

M & L Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Bharadwaj Builders

M/S UnitedConstruction

yash enterprises

Jamna Constructions

PREMCHAND BHAWANI SAHAI

ram prashad chotelal batham

KAILASH CHANDRA KHANDELWAL

Goyal Construction