CO Emergency Response Support System -112 in Existing Parking Complex Tutikandi at Shimla SH Providing E.I in First Floor Level 59.00M therein

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Providing & fixing IO switch with plate and cat-6 connector with pvc box as required complete in all respects.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole. Cat-A.

Supplying and fixing Higher Rating (80 to 125A) 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

MCB DP 50/63 A 'C' curve

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way , Double door

Supplying and fixing of following ways surface/ recess mounting, 7 Segment 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, with provision to mount MCCB incomer, 4 module sub-incomer in each phase and SP MCBs as outgoing (but without MCB ’s and incomer), complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachable gland plate, cable interconnections, including earthing etc. as required:- (Note: 7 Segment 415 volts, TPDB is normally used for 3 phase final distribution outlets are required.)

Double door-6 way (MCCB+12+18),7-segment

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Exhaust Fan, Heavy duty, 300 mm sweep

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make

LED Batten Light 20W

LED Batten Light 10W

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make

Square/round LED Panel Light 6/7W Surface

Square/round LED Panel Light 10/12W Surface

Square/round LED Panel Light 15W Surface

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.

Armoured cable 25 sq. mm (3.5 core)

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying and fixing electrical switch board, having 3 No. of 5 amp. modular switches and socket on suitable size of modular G.I box of 205mm X78 mm X 50 mm deep ( nominal size) on surface or in recess with suitable size modular sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp modular socket outlet and 5/6 amp modular switch, connection, painting etc.as req. (For light plugs)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 9" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:-

Instant Geyser 6 Ltrs.

L.T. Panel with Meter BOX

Incomer :

Outgoing - Busbar

Fabrication/Painting & Assembly

Fabrication charges of cubical type,Indoor type, Single door, Wall mounted, fixed type, free standing single front, dust proof & compartmentalized Distribution Board made out of M.S. CRC Sheet 16G, duly painted with Siemens Grey Powder Coated Paint as per specification

Assembly Charges of 100A 4Strip Aluminium Busbar (Horizontal/ Vertical) & Earth strud (current density of Aluminium Busbar shall be 1mmx1mm=1.00 Amp.) Aluminium shall be Electric Grade , Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.

Assembly Charges of Aluminium solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables

Control Wiring with Copper flexible Wire (size of control wire shall be 2.5 sq. mm Copper flexible for C.T. Circuit & 1.0 sq. mm for Control & 1.0sq. mm for Scada Wiring) with thimbles printed sleeves, tie & belt etc.

Assembly Charges of Accessories like Gasket, Doorlocks, Total Above Job Mention Copper flexible door earth, legend plates etc.

yash pal