SPL REPARS TO BLDG NO P-209 and P-210 (OFFR MESS STAFF ACCN) OF IDSR (AREN) AND SPL REPAIRS and ROOF TREATMENT OF BLDG NO P-181, P-184, P-185 OF FD HOSPITAL UNDER GE DIPATOLI

Amount

M&L providing, cement concrete as in roof kerbs or mud stops, filling around hold fast etc. to rounded or chamfered on edges of 1:2:4 Type B 1 (using 20 mm graded aggregate), complete all as specified and directed.

M&L for preparation of concrete roof surfaces and applying 10mm thick plaster in CM 1:4 and finished the surface even and smooth without using extra cement with water proofing compound as per manufactures instructions or as directed . Note : water proofing compound will be measured and paid for sepratelly

M&L for applying 2 coats aluminium paint over bituminous surface of membrane, complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surface, finished even and smooth with water proofing compound as per manufacture instructions, complete all as specified and directed.Note water proofing compound will be measured and paid for sepratelly

M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate to roof , floor, chajja, RCC shelves etc at water retaning surfaces, base of water tank etc with WPC and make proper good slope, complete all as specified and directed.(Note-wpc will be measured and paid seprately)

Demolition of cement concrete in any description and in any position not otherwise specifically provided , complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:6 on wall of brick work or concrete surface, finished fair and even all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surface, finished fair and even all as specified and directed.

Supply only liquid water proofing compound, complete all as specified and directed.

M&L for applying 3mm thick wall care putty including rubbing with smooth finish on old or new wall or ceiling plastered surfaces , complete all as specified and directed.

M&L for preparing new plastered surfaces or old untreated wall surfaces and applying two coats of distember oil emulsion white or tinted over one coat chalk whiting on wall surfaces complete all as specified and directed.

M&L for complete removal existing decorated wall treatment surfaces of any type and in any conditions and applying two coats oil emulsion distember white or tinted complete all as specified and directed.

Material and labour for preparation and treating ends of posts, back of chowkats etc area of tarred exceeding 0.10 Sqm but not exceeding 0.50 Sqm complete all as specified and as directed.

Material and labour for preparation and treating small articles, area tarred not exceeding 0.10 Sqm each such as hold fasts end of posts, back of chowkhats complete all as specified and as directed.

M&L for preparing the new plastered surfaces of wall and applying Two coat of cement based paint after one coat of white primer complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast exc half brick but n.exc one brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all as specified and directed.

M&L for applying two coat of weather proof exterior emulsion paint (1st quality)/plastic emulsion paint over weather coat primer on walls, chajjas,facia by mechanical applicator of any height of bldigs etc , including preparing of newly plastered wall surfaces complete all as specified and as directed .(Weather coat shall be of Asian paint, Apex ,ultima or equivalent as approved by GE)

M&L for preparation of new or old untreated ceiling surface and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old treated ceiling surface and applying two coats OBD white or tinted complete all as specified and directed.

M&L for complete removal existing decorated ceiling treatment surface and applying two coat white wash complete all as specified and directed.

S&F 4mm thick Figured glass, pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pane, complete all as specified and directed.

S/F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or descriptio) from steel frames, wooden frames or stone, concrete etcsurrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&Fix in repairs stainless steel steel wire cloth , 0.36mm nominal dia of wire and average with of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&Fix 12mm size of mesh wire netting of stainless steel steel wire 1.40mm dia of wire fixed to alum frame with tinned tacks of stainless steel wire staples, complete all as specified and directed.

Dismantling mildsteel or rough iron work of any description not otherwise provided for window or door shutters taken as under by cutting of rivets etc complete all as specified and directed

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified.

M&L for preparing the old painted steel surface of any description not otherwise described over 10 cm width or girth and applying two one coats of synthetic enamel paint complete all as specified and directed.

M/L for preparing the new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

M&L for applying two coats of synthetic enameled paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Disconnecting existing water tanks exc 250 but n.exc 500 ltrs capacity, setting aside (lowering if required ) for repairs, cleaning etc and reconnecting or re-fixing in any position completed all as spd and directed

Disconnecting existing water tanks exc 500 but n.exc 1000 ltrs capacity, setting aside (lowering if required ) for repairs, cleaning etc and reconnecting or re-fixing in any position completed all as spd and directed

Taking down GI tubing and connection including removing to store of 15mm dia complete aall as secified and directed

Taking down GI tubing and connection including removing to store of 20mm dia complete aall as secified and directed

Supplied and fixed GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed

Re-fixing GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed

Supplied and fixed GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed

Re-fixing GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed

S&F in repair Gun-metal, globe or gate valves 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Taking down chowkhat with shutter without taking off shutter from chowkhat exceeding 1.5 Sqm but n.exc 4sqm each complete all as specified and as directed

Re-fixing shutters of same opening exc 1 but n exc 2 sq.m each complete all as specified and directed.

Material and labour for refixing existing shutter of any description not exceeding 1 sq.m each in the same opening complete all as specified and as directed.

M/L 2nd class H/wood chowkhats, plain, solid, straight, wrought, framed, rebate on the solid,rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F Plain framed, panelled shutter (two panel) factory made 35 mm thick of 2nd class HW rail and stylewith lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), Kiln seasoned and chemically pressure treated,. complete all as specified and directed.

Supply and fix 30mm thick, 2nd class hard wood, glazed and skeleton window shutters, open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt 125mm long, complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolt of size 250mm with hasp and staple and fixing clips of sheet, complete all as specified and directed.

Supply and fix 100mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed, type B-21 complete all as specified and directed, complete all as specified and directed.

S&F Aluminium alloy,anodised handle cast type of size 125mm, complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any ize or patterns) including all heads,shoes,bends,swan-necks etc, complete all as specified and directed.

S&F PVC(SWR) pipe 110 mm dia single socketed in any length with rubber ring joints, fixed to wall with and including stack and clamp, complete all as specified and directed.

M&L PVC (SWR) bend of radius 110mm dia , complete all as specified and directed.

M&L PVC(SWR) Tee of radius 110mm dia , complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.

S&F 75mm PVC (SWR) Bends any radius, complete all as specified and directed.

S&F 75mm PVC (SWR) branch piece, single T equal or unequal , complete all as specified and directed.

Complete removal of all existing roof treatment from RCC roof including old hussion felt, tiles etc and preparation of surface with bire brush and cleaning with water complete all as specified and directed.

Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate).

Supply only liquid water proofing compound, complete all as specified and directed.

Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

M&L for applying a coat of bitumen primer @ 0.3L/sqm on roof surfaces, complete all as specified and directed.

M&L for applying 3mm thick APP modified polymeric membrane over the bitumen coat surface weight not less than 3kg/sqm and over lap 100mm and sealed by torch application as per manufacture insteructions complte all as specified and directed

M&L 22 mm thick machine pressed & polished‘ cement concrete tiles with grey cement without pigment of size 250 mm x 250 mm laid in neat cement slurry over and including 15 mm thick bed screed in CM 1:4 mixed with chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD 200 milli - litre mixed with 50 Kg of cement or STP No 1 (LIQUID) of STP LTD in proportion 200 milli litre per 50 Kg cement,as per manufactures instructions and tiles properly laid with 3 mm wide joints filled with FEVIMATE TG of DR FIXIT of PIDILITE INDUSTRIES LTD or TILE GLUE of STP LTD as per manufactures instructions complete all as specified and directed by Engr- in - charge.

Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply and fix in repair PVC bends 110 mm bore, any radius complete all as specified & directed.

Taking down Shutters of any description n exc 1 sq. m each, complete all as specified and directed.

Taking down Shutters of any description n exc 2 sq. m each, complete all as specified and directed.

Taking down Shutters of any description exc 2 sq. m each, complete all as specified and directed.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each, complete all as specified and directed.

S&F 2nd class hardwood factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

M&L Glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of OLD steel surface of any descripion over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed..

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening , complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified

Supply & fixing 125 mm Aluminium handles, cast type, anodised fixed complete all as specified.

S&F Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

M & L for Prelaminated particle board, 18/19mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

M&L mild steel works as in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc , complete all as specified and as directed.

Supply & fix in repair vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with, integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed.

Supply & fix in repair PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

S&F in repair Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

Supply & fix in reapir PVC connections of 900mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fix in reapir angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Supply & fix in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Towel rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms), complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with aluminium alloy brackets and guard rail, complete all as specified and directed.

Taking down GI tubing and connection including removing to store of 15mm dia complete aall as secified and directed

Taking down GI tubing and connection including removing to store of 20mm dia complete aall as secified and directed

Supply, fix in repair 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down old existing GI pipe wherever required and including testing complete all as specified & directed.

Supply, fix in repair 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking down old existing GI pipe wherever required and including testing complete all as specified & directed.

Supply & fixing in repair steel C.P. grating 100/125 mm dia as reqd at site complete all as directed.

S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.

Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed.

Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings complete all as specified & directed.

Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

S & F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description.

Material & labour 15mm thick rendering in CM 1:4 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified

Material & labour 5mm thick rendering in CM 1:3 on ceiling or concrete surfaces finished even and fair complete all as specified

M&L for repair and rendering 10mm thick in cm 1 :3 on chajjas, facia, roof projection, column sides, beam bottom and sides including throating after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed .

Material and labour for preparation of OLD plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

Material and labour for preparation of NEW plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

Materials & labour for prepration of NEW plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

Materials & labour for prepration of OLD plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

M & L Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Cement concrete 1:2:4 type B0 using 12.5mm graded agg 25 mm thick for laying of floor etc complete all as specified and directed

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement screed bed or bedding layer in CM 1:6 , complete all as specified and directed.

M&L Non - Skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement screed bed or bedding layer in CM 1:6 , complete all as specified and directed.

M & L Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 , complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over incl 20mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl screed bed of CM 1:6 complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl CM 1:4 complete all as specified and directed.

Demolition of brick work built in cement morter including all quoins, arches, pillars etc, , complete all as specified and directed.

Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

M/L for 75 mm thick cement concrete1:3:6 type C2,using 40 mm stone aggregate finished even & smooth without using extra cement as in plinth protection etc. complete all as specified.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

M & L for Reinforced concrete pipes, class NP2, bore dia 300mm laid and jointed complete with collars complete all as specified.

M & L for Concrete bed to drain pipes including packing underwith Cement concrete of 1:3:6 type C-2, and haunching against the sides of pipes after they are laid and tested; in, complete all as specified and directed.

S & F Chequered cement concrete tiles 20cmx20cmx25mm thick, set,jointed and pointed in neat cement slurry in floors including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishesCM 1:4, complete all as specified and directed.

S&F 60 mm thick Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and no pigment complete all as specified and directed.

M/L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 Mm thick in each layer complete all as directed

M&L providing pre-cast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover slabs, set in cm 1:4 including necessary form work complete all as specified and directed

M&Lfor form work to the edge of concrete flat n. exc 200 mm thick complete all as specified and directed. .

Supply & fix mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down old/unserviceable MCB DB SPN/TPN any capacity by disconnection of electric connection including MCBs,Isolators,etc and making good to disturbed surface complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLS cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 140 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 140 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 140 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed at site.

M&L for lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed at site.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.

M&L for submain complete with 2x1.5 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLS cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 1.5 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

All as per ser item No-151 here-in-before but 2X2.5 Sqmm and 1X 2.5 Sqmm for Earth wire

All as per ser item No-151 here-in-before but 2X4 Sqmm and 1X 4.0 Sqmm for Earth wire, complete all as specified and directed.

All as per ser item No-151 here-in-before but 2X 6 Sqmm and 1X 6.0 Sqmm for Earth wire, complete all as specified and directed.

Supply and fix MCB DB SPN 8 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix MCCB DB TPN 4 way with metal door suitable for Provision of incommer as MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed at site.

S&F MCB SP( 6 to 32) Amp 240 volt 'C' curve complete all as directed and specified by Engineer in charge.

S & F in replacement of 240V, 10KA MCB SPN 40 Amps "C" Series fixing in DBs, connecting with bottle type copper thimbles complete all as specified and as directed by Engineer in charge.

S&F LED tube light fitting 20 watt 230 Volt ultra slim linear LED Lighting with aluminium housing & integrated electronic driver, including all internally pre-wired and inncluding connecting with flexible copper conductor cable with suitable size complete all as specified and directed at site.

S & F for Highly efficient LED Bulbs, 9 W, used as a ready replacement for existing Old UNSV bulb lamp complete all as specified and directed by Engineer in charge

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed.

S&F steel body ventilating air fan single phase 300 mm sweep complete with louver shutter and including making of hole suitable size fan base after cutting of brick/stone wall /suitable size of water proof ply wood complete all as specified and directed.

M&L for rewinding repair and greshing of ceiling fan of any size sweep single phase. Ceiling fan of any size opening from any height or any locations, fan opening from hook, clamp & refixing the same after cleaning and greshing with required necessary cutting/welding/granding job or required store such as nuts, bolts, washer and suitable length mild steel/ down rod duly making holes etc complete as specified and directed.

Supply, Laying on replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 35 sqmm 3 1/2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables, poles/stays and struts etc and getting out including trimming sides and forming bottom surface complete, all as specified.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Returning & filling in including spearing, leveling watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement.

Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed

M &L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed .Note :- i) Earthing test must be carried out in presence of Engr-in-Charge. ii) The earthing result not more than 2 Ohms or disered earth resistance value. iii) Megger required for testing will be be provided at site by the contractor. iv) Contractor shall submit earth resistance testing report before submission of bill.

M/S ABHAY KUMAR AND BROTHERS

M/S OMANIA ENTERPRISES

M/S.R.S.Chauhan and Sons

ashiyana electrical company

M/S AMOD KUMAR PANDEY