Overhauling, Repairing and Re-erection of 20M High masts at Sri Sakthi theatre Junction in Tiruppur city Municipal corporation

Amount

Dismantling and refixing of the 20-meter high mast lamp pole from the pedestal basement will be performed using hydraulic cranes to ensure the safe lifting and handling of all components, including the pole, LED fittings, wheel guide, gearbox, motors, and high mast lantern gauge assembly. The total cost covers fuel, crane operator labor and transport vehicle is designated to carry the dismantled components to a safe location, ensuring it can accommodate the mast's length and weight.This operation will be conducted under the supervision of department officials to prevent any physical damage to the pole and associated equipment.

Repairing , Servicing and Painting : The servicing the gearbox should be for lubrication or replacement of worn components performed to maintain efficient torque conversion. The 3Ph motor should be tested for electrical integrity, including checks on voltage, power output, and connections, along with lubrication of moving parts to prevent overheating and 20-meter mast should undergo a thorough cleaning and repainting process, using high-quality weather-resistant epoxy paint to protect against corrosion and enhance visibility.The wheel guide assembly repairs should be made to ensure that the mast can be raised and lowered effortlessly. This servicing not only ensures the reliability of the lighting system but also extends the lifespan of all components involved.

Wiring charges for electrical system, cable connections will be connected to junction box with suitable PVC sheathed polythene armoured flexible electrolyte copper 1.1 kv grade flat 3 core cable as directed by the departmental officers

Pole Foundation forHigh Mast Making PCC for leveling coarse of size 1800mmx1800mmx200mm, PCC for leveling coarse 1:4:8 and Making RCC foundation of grade M20 (1 cement : 1.5 sand : 3 stone/brick aggregate) 1800mmx1800mmx 300mm shall be pedestal and 800mmx800mmx1300mm for Coulmn above ground level using steel reinforcement of grade RTS with 50mm clear cover to reinforcement and rings using 8mm dia steel reinforcement @ 190 C/C,using shuttering, along with supply & installation of 2 nos. of 40mm dia HDPE pipe for cable entry and cable exit. Suitable foundation bolts M30Size of 800-850mm Length shall be anchored in the foundation. It includes water curing as required and soil excavation & backfilling. It also includes supply of all material and labour including erection of foundation at Site.

Add GST @ 18%

Delve engineering Private limited (BID ID -1273384)