Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | Single ten₹65.0 LAccepted-AOC | Single ten | Accepted-AOC Single negotiated tender |
Tender Value
₹69.1 L
EMD Value
₹1.4 L
Closing Date
4 Aug 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Office of the Executive Engineer, BRS, PWD, Puducherry
Strengthening the diaphgram a wall including providing U shaped hook and Mooring ring in the existing Quay of the Fishing Harbour at Thengaithittu, Puducherry.
2022_PWDC1_10751_1
No.02 /PW/SEI/ BRS/ 2022-23
Open Tender
Civil Works - Others
Item Rate
90 days
Puducherry
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,050
₹1.4 L
27 Oct 2022
27 Jul 2022
5 Aug 2022
27 Jul 2022
4 Aug 2022
27 Jul 2022
90 days
Amount
Chipping of unsound / weak concrete material from slabs , beams , columns etc. with manual Chisel and / or by standard power driven percussion type or of approved make including tapering of all edges , making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete - 25 mm average thickness
Applying a polymer based anticorrosive coating material of CERA / SIKA / FOSROC / Mc Bauchmie / DON / BASF OR EQUIVALENT make certified and tested by accredited institutions mixing machanically until it is homogeneous and applying the same as one rich coat on prepared steel surface with brush with all lead and lift etc., complete and as directed by the Engineer-in-charge (Measurement as per the total area of treatment).
Providing , mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and complete in all respect - Epoxy bonding adhesive having coverage 2.20 sqm /kg of approved make
Providing high strength Non shrink free flow micro concrete of CERA / SIKA / FOSROC / Mc Bauchmie / DON / BASF OF EQUIVALENT make certified and tested by accredited institutions like IIT /SERC / NTH or so( confirming to ASTM C109 7cm cube for compressive strength 45-50 MPa, Physical properties: Tensile Strength - 2.0 N/Sqm @ 28 days (BS 4551-80), Flexural Strength - 5.0N/Sqm @ 28 days ) over the Epoxy bonding agent applied area on columns, slabs, beams etc., upto floor five level (aggregate of 6mm to 12mm chips may be added) (Measurement has to be taken considering 15mm thickness of repaired surface). For this treatment precise quantity of water ie 0.15 W/P ratio will be maintained for good mortar consistency as per the manufactures specification with all lead and lift etc., complete and as directed by the Engineer-in-charge. including cement plaster.
Providing, mixing and applying SBR polymer (of approved make ) modified Cement mortar in proportion of 1:4 (1 cement : 4 graded coarse sand with polymer minimum 2% by wt.of cement used) as per specifications . Note: Measurement and Payment : The Pre-meaurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding /tapping with a blunt metal instrument and /or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N / Sqmm) - 12mm average thickness
Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1:2 (1cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)
Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level – Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more
Centering and shuttering including strutting , propping etc and removal of form for - Walls (any thickness ) including attached pilasters , butteresses , plinth and string courses etc.
Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story height made with 40 mm dia .M.S.tube 1.5m centre to centre , horizontal & vertical tubes joining with cup & lock system with M.S.tubes, M.S.tube challies, M.S.clamps and M.S.staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as approved. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (Note: This item to be used for maintenance work judicically, necessary deduction for scaffolding in the existing item to be done.)
Extra for providing and mixing of plasticizer (Super flow special) as admixture for concrete works @ 3 litres for one cubic metre as directed by Engineer-in-charge
Providing and fixing vertical anchorage bar with 16mm dia. MS Threaded rod of length of 40cm holes of 20mm dia. and 150mm deep drilled at necessary places as directed by the Engineer-in-charge including drilling, cleaning the drilled holes with air blower to remove all dust and fixing the rod in the filled holes with a two component polyester resin Anchor grout of CERA / SIKA / FOSROC / DON / PRIMA DON or Equivalent make as per manufactures specification and welding the anchorage bar to the beam reinforcement as directed by the Engineer-in-charge.
Supplying and fixing in position 'U' shaped hook with 2 Nos. of mooring ring. Both 'U' shaped hook and mooring ring shall be made of 32mm diameter stainless steel grade AISI 316. The height of U hook shall be 820mm and inner clear spacing between the legs 135mm. Each mooring ring shall be of inner diameter 160mm with single welded joint. Both 'U' shaped hook and mooring ring shall be bent up only with cold forming method (Hydraulic bending). The 'U'shaped hook shall be fixed in position in the existing diaphragm wall by drilling 2 Nos. of 50mm diameter holes by core cutting method for a depth of 300mm. The 'U' shaped hook shall be fixed by using Epoxy bonding agent (FOSROC LOKFIX E55) after cleaning with necessary air nozzle and wire brush as specified by the manufacturer. The 'U' shaped hook shall be welded with 2 Nos. of 12mm diameter MS rod (TMT/TISCO/ VISAG/ IISCO/SAIL/JSW) anchorage bar of length 500mm as shown in the sketch.. The rate for the 'U' shaped hook with 2 Nos. of mooring ring and 2 Nos. of anchorage bar shall include cost of material, transportation, loading, unloading, cost of bonding agent, fixing charge, drilling charge, machinery charges, welding charges, contractor profit, testing charges and includes all taxes etc., complete as per drawing and as directed by the Engineer-in-charge. (Note: Original purchase bill, test report for the material should be produced for verification)
Supplying and fixing in position 'U' shaped hook made of 32mm diameter stainless steel grade AISI 316. The height of U hook shall be 820mm and inner clear spacing between the legs 135mm. 'U' shaped hook shall be bent up only with cold forming method (Hydraulic bending). The 'U' shaped hook shall be fixed in position in the existing diaphragm wall by drilling 2 Nos. of 50mm diameter. Holes by core cutting method for a depth of 300mm. The 'U' shaped hook shall be fixed by using Epoxy bonding agent (FOSROC LOKFIX E55) after cleaning with necessary air nozzle and wire brush as specified by the manufacturer. The 'U' shaped hook shall be welded with 2 Nos. of 12mm diameter MS rod (TMT/ TISCO/ VISAG/ IISCO/ SAIL/JSW) anchorage bar of length 500mm as shown in the sketch. The rate for the 'U' shaped hook and 2 Nos. of anchorage bar shall include cost of material, transportation, loading, unloading, cost of bonding agent, fixing charge, drilling charge. machinery charges, welding charges, contractor profit, testing charges and includes all taxes etc., complete as per drawing and as directed by the Engineer-in-charge. (Note: Original purchase bill, test report for the material should be produced for verification)
Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .