Karnataka

Active

Works

Buildings

Repairs to GHS Urdu Boys RMSA Annigeri in Navalgund Taluk of Dharwad Distict

Rural Development and Panchayat Raj Department

RDPR Division Office Daharwad | Karnataka

Amount: ₹2.5 LCloses: 31 Jul 20267d left

Timeline

Published20 Jul 2026
Closes31 Jul 2026

Tender Value

₹2.5 L

EMD Value

₹6,400

Closing Date

31 Jul 2026, 9:30 pm7d left

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

SHRISHAIL MALLIKARJUN HONAKERI

Office Number

08362749018

Work Description

Repairs to GHS Urdu Boys RMSA Annigeri in Navalgund Taluk of Dharwad Distict

Tender Information

Tender ID

RDPR/2026-27/BD/WORK_INDENT27861

Reference Number

RDPR/2026-27/BD/WORK_INDENT27861

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Daharwad

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredContractor should upload KPWD renewal registration copy.

RequiredTo qualify for award of this contract each tenderer in his name should have in the last five years period ie 2021-22 to 2025-26 Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover in all classes of civil Engineering construction works only Rs.2,53,243.71 with usually not less than the estimated cost under this contract with UDIN Number.

RequiredIn last five years That is 2021-22 to 2025-26 Satisfactorily completed as A prime contractor for at least one similar nature of work done work 50 Percent of the cost of the work that is not less than the amount Rs.1.27 Lakhs Certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

RequiredLiquid assets and or availability of credit facilities of not less than Rs.0.76 Lakhs i.e., 30 percent of amount put to tender. Credit lines, letter of credit, certificates from Nationalized banks for meeting the fund requirement etc. for particularly this work only. Unconditional in given format.

RequiredThe contractor should scan the GST Certificate

RequiredThe contractor should scan the PAN card& Contact Details

RequiredCalculation sheet of Bidder Capacity AxNX2.5-B

RequiredTenderer should upload address and contact number.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

As per Karnataka State Government order No.LD 300 LET 2006 Bangalore Dated 01/01/2007 and Government Letter No.PW 134 BMS 2007 Dated 27/7/2007 a sum amounting to 1 percent of the bill amount will be deducted towards Construction Labour Welfare fund.

The bidder shall bear all costs associated with the preparation and submission of each tender and the employer will in no case be responsible and liable for those costs. The department is not responsible for any delay in accessing e-procurement portal

The tenderer should quote his rates with all lead and lifts, loading and unloading including cost of labour, hire charges of machinaries and other incidental charges etc complete as per specification and directions of the Engineer incharge of the work.

Contractors should have to upload the scanned copy of all necessary qualification documents, and submit the original documents certificates after opening the tender for evalution and verification.

Conditional Tenders will not be accepted.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders The departments shall not be responsible for non accessibility of KPPP portal due to internet connectivity issues and technical glitches at bidders end.

All materials required for the work shall be procured by the tenderer himself and should be got tested by the quality control authorities at his own cost before use on work.

Within 20 days of receipt of Letter of Acceptance, the successful Tenderer shall deliver to the employer a Security Deposit in the form of NSC/DD/ FDR in favor of the Executive Engineer, P.R.E. Division,Dharwad, for an amount equivalent to 5 percent of the Contract price plus additional security for unbalanced tenders in accordance with the conditions of contract.

Successful Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) when bills are raised using Contract Management Module.

Self declaration of machineries are not accepted.

Third party inspection is mandatory for all the works in this programme.

The Employer reserves the right to reject any or all tenders without assigning reason.

Tenderer must submit his present accurate postal address and phone / cell phone number.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer is final.

The Furnished E.M.D. will be released only after successful execution of the Tender Agreement by the successful Tenderer or bid validity days from the date of submission of Tender whichever is earlier.

The successful tenderer shall maintain the work during the defect liability period of 1 year from the date of completion of the work.

The Tenderer at his own responsibility and risk is encouraged to visit and examine the Site of Works and its surroundings and obtain all information that may be necessary for preparing the Tender and entering into a contract for construction of the Works. The cost of visiting the Site shall be at the Tenderers own expense.

All other conditions and requirements has to be fulfilled as per the KW Standard Bid Document.

It is to be noted that any false documentation found to be uploaded, action may attract punitive measures such as Blacklisting, Cancellation of Registration etc.

The GST will be paid separately to the Contractors as per the Guidelines of the Government.

The work shall be inspected by the Third Party and the bill shall be admitted only after the satisfactory quality reports from the Third Party.

All safety precautions, warnings, signs, deployment of security guards have to be ensured so that no untoward incident happens on account of negligence or any project activity.

All materials required for the work, shall be procured by the tenderer himself and should be got tested by the Department quality control authorities at his own cost before use for the work. If employer wishes to engage third party inspecting agency for the said work, apart from the quality control authorities, then the contractor should cooperate with the third party for test

In the case of death of the contractor after executing the agreement/ commencement of the work, his legal heir, if is an eligible registered contractor and is willing, can execute and complete the work at the accepted tender rates in the same terms and conditions of the contractor of the work

Corrigendum/Modifications/Corrections if any will be published in the KPPP website only.

The work should be executed as per the KTPP Act.

The work should be completed within the stipulated time period from the date of issue of work order including Rainy Season.

Contractor should obey with the above conditions in addition to the KW-1.

To qualify for award of this contract each tenderer in his name should have in the last five years period (i.e., 2021-22 to 2025-26) Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover (in all classes of civil Engineering construction works only) of Rs.2,53,243.71 usually not less than the estimated cost under this contract.

In last five years (i.e., 2021-22 to 2025-26) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs.1.27 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

Liquid assets and /or availability of credit facilities of not less than Rs. 0.76 Lakhs(30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format

Department of Mines and Geosciences Dated: 25-03-2013 Contractor Should get the Mineral Dispatch permit letter and submit it at the time of bill payment. In case of Non-submission of Mineral Dispatch permit action will be taken to impose a penalty of 5 times the Royalty.

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC at the time of aggrement (NSC should be fledge in the name of Executive Engineer)

The Increase in GST shall not be paid in the extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extention of time.

Assessed available tender capacity - (AxNx2.5 - B) Where A is Maximum value of civil engineering works executed in any one year during the last five years That is 2021-22 to 2025-26 year taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which Tenders are invited. B is Value, at price level, of existing commitments and on-going works to be completed during the next years.

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹6,400

Important Dates

Last Activity

20 Jul 2026

Published

20 Jul 2026

Download Ends

30 Jul 2026

BOQ Preview

•

Repairs to GHS Urdu Boys RMSA Annigeri in Navalgund Taluk of Dharwad Distict

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

•

Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Supplying of Structural steel such as tees, angles channels and R.S. joists

•

Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...

•

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on...

•

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

•

Engaging of Literate Labourer Highly Skilled

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...

•

Providing and fixing PTMT stop cock of approved quality and colour 20 mm nominal bore, 89 mm long, weighing not less than 88 g

•

Providing and fixing gun metal non- return valve of approved quality (screwed end) : 25 mm nominal bore Horizontal

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

27861.pdf

Others - Detail estimate • 7.15 MB

27861.doc

Tender Document • 0.18 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].