SPECIAL REPAIRS TO BLDG NO P-81 (08 QTRS) KHOJATOLI WEST OF 14 GRENADIERS AND NISHAN HUT AT BSO YARD AT KHOJATOLI POCKET OF RANCHI MIL STN UNDER GE RANCHI

Amount

M & L for complete removal of existing treatment of old plastered surface of wall applying two coats of acrylic distemper of any shade on walls surfaces over a coat of alkali resistant primer free from undulations, complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of acrylic distemper of any shade on walls surfaces over a coat of alkali resistant primer free from undulations, complete all as specified and directed.

M&L for complete removal of existing treatment from external surface of walls and aaplying two coats of weather proof paint (Exterior grade) over a coat of primer including preparation of surface, complete all as specified and directed. (Make : ICI Paints (Dulux Weather shield)/Asian paints Ultima (Apex),

M&L preparation of new plastered of external surface of walls and applying two coats of weather proof paint (Exterior grade) over a coat of primer including preparation of surface, complete all as spd and directed.(Make : ICI Paints (Dulux Weather shield)/Asian paints Ultima (Apex), complete all as specified and directed.

Preparation of old surfaces of ceilng but applying one coat of white wash on ceiling surface, complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted, complete all as specified and directed.

M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted, complete all as specified and directed. Make : Asian or equivalent

M&L preparation of new wooden or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying tow coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for prepration of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. Make : Asian or equivalent

Demolition of cement concrete of any description and any position and removing the rubbish from the work site, complete all as specified and directed.

M&L PCC 1:2:4 type B1 (20mm graded stone aggregate), 25 mm thick as in sub top layer of floor and finished rough to receive the floor toping, complete all as specified and directed.

M&L for coloured joints free non skid ceramic tiles, 6 to7 mm thick, edgeless , area of each tile exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles as directed at site, complete all as specified and directed.

M&L for 450x300x7 mm thick joints free glazed ceramic tiles colored as in dado/ skirting and vertical serfaces set & jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4, Shade, pattern, laying etc of tiles as directed at site, complete all as specified and directed.

M&L for 14 to 16 mm thick granite (of any type), as in cooking plateform etc set in CM 1:4 and grinding and polishing and rounding / moulding the edges, complete all as specified and directed.

Taking down cement plaster from brick/concrets surfaces including raking out joints, hacking for key and scrubbing down with water etc, complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces finished even by mixing WPC in the outer coat as per manufactures instruction, complete all as specified and directed. (Note : WPC shall be measured and paid for under separate items)

Supply only liquie water proofing compound as per manufacture instruction.

M&L rendering 10mm thick in cement plaster 1:3 on ceiling surface finished even and fair without using extra cement, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stone work and precast concrete articles, complete all as specified and directed.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilatiate demolition), complete all as specified and directed.

M&L RCC 1:1.5:3 type A1 using 20mm graded aggregate as in Precast cover slab , shelves and similar articles and setting in cement mortar 1:4 complete with joints to match, complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty in square but exc 0.50 sqm in each pane in.

Taking down steel water tubing and connections including cleaning for re-fixing or removal to store of 20mm bore pipe.

All as per item No 27 above but of 15mm bore pipe.

S&F tube medium grade galvanized with all fittings and fixed to walls or laid in floors of 15mm bore including cutting chasing in walls etc, complete all as specified and directed.

All as per item No 29 above but except pipes.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore.

All as per item No 31 above but except pipes

S&F stainless steel wire cloth, 0.36 mm noimnal dia or wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples, fixed as in repairs.

S&F Stainless steel wire cloth, 0.36 mm noimnal dia or wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples all as specified.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) and removing to or from store

Taking down chowkats or frames exc 1.5 sqm and n exc 4 sqm each with shutters (without taking off shutter from the frame).

S&F of 1.25 thick Pressed steel frames 165x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc, complete all as specified and directed.

M&L PCC type C-1 1:3:6 (20mm graded aggregate) as in filling of hollow portion of Pressed steel chowkat, complete all as specified and directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing (Rajshree brand or equivalent).

S&F 35 mm Factory made, Plain framed, panelled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated of 35 mm thick shutters.

S&F 2nd class hard wood 35 mm thick glazed and gauzed skelton door shutters of 10 panels, factory made, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) (larger size to be provided), complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm with steel inside with solvent cement for stiles and plain colour PVC sheet for top rails, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, fixing in the frame at site as per specification, drawing and as directed (Rajshree brand or equivalent).

M&L for welding in repairs to metal n exc 6 mm thick and length exc 2.5 cm and n exc 5 cm, complete all as specified and directed.

S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, and similar small conforming to Fe 410-0 or Fe 310-0.

M&L PCC 1:2:4 type B-1 ( using 20mm graded aggregate) as in bed blocks for hold fasts including necessary from work, PCC benching, copings etc, complete all as specified and directed.

S&F Butt hinges medium weight cold rolled stainless / Mild steel 100mm size, complete all as specified and directed.

S&F extruded aluminium anodised alloy handles, fabricated type, size of handle 150 mm.

S&F aluminium ,anodized 200mm long barrel tower bolts of extruded section.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixibng bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F Mild Steel 150mm, ordinary rat tail rod pattern springs,incl roller and roller plate, complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodized, with hand drawn steel spring fixed in door, overall length of cover plate 150 mm.

S&F continuos (Piano) hinges , mild steel, bright finish or electro galvanised of width 30mm fixed in repair.

S&F hasp and staple aluminium anodised, safety type including bolt to hinge plate and fixed with screw of 125mm size fixed in repair.

S&F extruded aluminium alloy handles,febricated type,anodised of 75mm size fixed in repair.

S&F aluminium, anodised, barrel tower bolts of extruded section and fixed of 75mm long fixed in repair.

S&F 12 mm thick veneered decorative plywood, grade I (BWR resin) decorative veneers on both sides, complete all as specified and directed.

S&F MS PVC coated brackets made in shape and size to hold curtain rods of 20 mm dia and size of bracket 150mm colour and Pattern as approved at site.

S&F in repairs MS Conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as a approved with bracket and fixed to wall, complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs Gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions. Make : Hindware

S&F in repairs 15mm bore angle cock, cast copper alloy CP, fancy type high presure with capstan head handle, screwed both ends for iron pipe of for unions, complete all as specified and directed.

S&F in repair 15mm bore bib tap long body cast copper alloy CP fancy type with capstan head handle,screwed down, screwed for brass ferrule and fixed.

S&F in repairs shower rose brass cromium plated with swivel joints of size 75 mm dia cast copper alloy CP, fancy type with CP neck 6" long made to shape, complete all as specified and directed.

S&F 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.

S&F 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe.

S&F PVC Connection 15mm size with PTMT nuts of length 450mm long.

S&F 32 mm dia waste coupling PTMT (half or full threaded) (minimum wt-45 gms) fixed in repairs, complete all as specified and directed.

S&F 32 mm dia PVC waste pipe fixed in repairs.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest 'P' or 'S' trap front or back intlet incl provision of PCC bedding and connection pipes (excluding flusihing cistern but including CP brass flushing pipe) (rate also including for taking out unhygienic old WC and its removal from the site)

S&F in repars vitreous china wash down water closet pan (pedestal pattern), white, complete all as specified and directed.

S&F Brass CP towel rail 20mm dia `D' type 60 cm long between flanges.

S&F Grating doom 125/100mm dia.(Min.weight 25gms) of PTMT fixed in repair.

S&F in repair PVC valve less, syphonic action type flushing cistern, low level with inlet, ball valve float and handle including brackets of capacity 10 ltrs incl PVC connection wih brass nut on both ends and CP Brass flush pipe.

S&F in repair Vitreous China wash basin white flat back size 550x400 mm including waste pipe of size 32mm bars, CP waste coupling 32mm, PVC connection pipe 450mm long with a pair of brass nuts & PVC washers on MS angle iron 25x25x3mm thick brackets.

S&F soap dish, 1mm thick stainless steel fancy type, fixed to plugs with chromium plated brass screws, complete all as specified and directed. ,

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 110mm dia

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints using solvent adhesives fixed to walls with brackets etc of 75 mm dia, complete all as specified and directed.

S&F PVC (SWR) bends/shoes any radius of 110mm dia

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia

S&F 75 mm bore PVC floor trap with 75mm dia grating including jointing to waste pipe, complete all as specified and directed.

S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes pipe including coupling of suitable size including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914 mm x 460mm bowl size 405mm x 354 mm x 203 mm, complete all as specified and directed. Make PRAYAG Cat Part No 1239D

S & F in repair kitchen plate rack made of stainless steel 787 x 605 x 254 mm size fixing with wooden plug with suitale size of screws, complete all as specified and directed. Make PRAYAG Cat Part No P340

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed.

S&F of 0.60 mm thick galvanized corrugated iron (CGI) sheeting with two corrugation side lap using grade ‘O’ sheets having zinc coating @ 120 gram per sqm inclusive of both sides, fixed with ‘L’ or ‘J’ type hooks or cranked hook / bolts and washers as in roof covering etc, complete all as specified and directed.

Removing of old paint by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats and any width or girth, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level), complete all as specified and directed.

M&L cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundations , filling and mass concrete etc, complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (20mm graded stone aggregate), 25 mm thick as in sub base of floor and finished rough, complete all as specified and directed.

M&L for 20-25 mm thick machine cut Kota stone slab as in flooring over 20 mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish, complete all as specified and directed.

M&L for 20-25 mm thick machine cut Kota stone slab as in risers of steps, skirting, dado and pillar over 10mm thick cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish, complete all as specified and directed.

Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment floor, complete all as specified and directed. MAKE : SWASTIK

M&L for sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

Dismantling of structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc , complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exculsive of steel, sheeting or other covring, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410-0 or Fe-310-0, complete all as specified and as directed.

PCC 1:2:4 type B-1 (using 20mm graded stone crushed aggregates) as in roof kerbs, benches and water troughs etc, including necessary moulding, complete all as specified & directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar, complete all as specified and directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for 50mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded stone crushed aggregate) finished even and smooth using extra cement as in plinth protection, complete all as specified and directed.

Supply only water proofing compound (Powder), complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for re use to be measured separetly including making good the disturbed portion/surface, complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm with casing caping of suitable size with fixing accessories, to be fixed , for one light /fan/bell point controlled by one switch withsunken box of suitable size incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly, complete all as specified and directed.

All as per item No 103 above but for one 3/5 pin socket 5 Amp on independent board.with 1.5 Sqmm wire with 1.5 Sqmm earth wire, complete all as specified and directed.

All as per item No 103 above but for one 3/5 pin socket 5 Amp on same board, with 1.5 Sqmm wire with 1.5sqmm earth wire, complete all as specified and directed.

All as per item No 103 above but for 3 pins socket outlet 15 Amps independent with 4 sqmm incl continous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sqmm, complete all as specified and directed.

S&F switch piano flush type/Bell push, 5 Amps, single pole one way Make : Anchor/Havells/ABB ( ISI marked)

S&F socket 5 pins, 6 Amp, flush type piano (multi purpose), Make : Anchor/Havells/ABB ( ISI marked)

S&F Socket 15 Amps flush type 230 Volts , AC, complete all as specified and directed. Make : Anchor/Havells/ABB ( ISI marked

S&F switch 15 Amps flush type 230 Volts , AC, complete all as specified and directed. Make : Anchor/Havells/ABB (ISI marked)

S&F ceiling rose, surface backlite, 65x50mm, three terminals, Make : Anchor ISI marked. (Make : Anchor/Havells/ABB ( ISI marked)

S&F LED street light 35W with IP 65 protection 240V contractor will avail warrenty of 2 Years. Make Havells/ Bajaj/Crompton

S&F LED Batten 20w with body made of extruded aluminium alloy housing and with extruded polycarbonate diffuser for optimum and Wide light distribution. Ingress Protection of Min IP 40 with Driver having inbuilt Protection against Short Circuit Miswiring, Over Voltage and Surge Protection of upto 6kV. THD < 5 %, CRI>80. PF>.95.System Efficacy of the Product should be >130lpw( Total System Lumens > 2600 lm). The Colour of the fixture should be in Grey finish. The Fixture and Driver should be of the same Brand only.Operating Voltage Between ( 140-270)V. The Avg Life of Product Should be 50,000 Burning Hours @L70. The Fixture and Driver should be BIS Approved. The Engineer in Charge can take any Random Sample from Lot and send it for testing from any Govt Approved NABL Lab . The Cost of the same have to be borne by the Contractor. In case the sample is rejected the Whole lot will be rejected by the Department.Contractor will avail warrenty of 2 Years Make- Havells/Bajaj/Crompton

Dismantling and taking down existing unserviceable cable of any size and making good to disturbed surfaces to match the existing surfaces.

Supply & laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 06 sq mm 2 core including taking down and laying with excavation, all laying mtrls, GI pipe, boring as per site requirment use for services connection as per specification, complete all as specified and directed. Make- Grandlay/Havells/Finolex

Taking down unservicable main switches MCB's DB's etc any type and capacity including making good the disturbed surfaces to match the existing.

S&F single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar, neutral link , earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 06 ways. Make:-Havells / Legrand / L&T .

S&F MCB SPN 32 to 63Amps 415V incl all termnials, fitting etc, complete all as specified and directed. Make:-Havells / Legrand / L&T.

S&F MCB SP 6 to 40 Amps 415V incl all termnials, fitting etc, complete all as specified and directed. Make:-Havells / Legrand / L&T.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion.

BHARATI ENTERPRISES

india trading company

Prativa Enterprises

M/S Manoj Kumar Sinha

M/s Dwarika Nath Singh

M/S DILIP KUMAR