Construction of Inspection House and boundary wall on Departmental Land situated in Rampur in District Jaunpur under Sharda Sahayak Khand-39, Prayagraj. Lot 2

Amount

Jungle clearence of Behya/Sarpat/Gondi and other weeds and its disposal including all labour, material T&P etc complete. As per direction of Engineer in charge.

Earth work in filling in all type of soil including all lead-lift, labour and T&P etc. complete. As per direction of Engineer in charge.

Earth work in excavation of foundation, in all type of soil with all lead and lift and proper disposal/back filling of excavated earth including cost of labour and T&P etc. complete. As per direction of Engineer-in-charge.

Brick Work M-150 grade in 1:4 CM with cement and yamuna coarse sand (F.M more than 2.0) including cost of all materials, labour and T & P etc. complete. As per direction of Engineer- in- charge.

Construction of granular sub-base by providing coarse graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density complete. As per direction of Engineer- in- charge.

Supplying and laying 80mm thick I - shaped Mechanically compresses inter locking cement concrete paver blocks over 15cm thick compacted granular sub base material manufactured by high pressure & controlled vibration machine having plan dimension 200 × (160+120mm) with minimum 5mm thick topping of D.P. cement mixed with 25% marble powder. The compressive strength of concrete paver block shall not be less than 30 MPa & kg/no.

Providing and fixing vitrified tiles 600x600 mm, 9mm thick(dark) shade Somany/Kajaria/Jonhson/Orient make fixing with 1:3 C.M. including cost of all materials , labour and T&P etc. complete as per direction of Engineer- in- charge.

Centering & Shuttering for R.C.C & P.C.C work including cost of all materials , labour and T&P etc. required for proper completion of work.

Cutting, bending, binding and placing in position of reinforcement in boundary wall including cost of all labour ,binding wire reinforcement steel and T&P etc. complete. As per direction of Engineer in charge.

Mixing & Laying R.C.C. 1:1.5:3 with cement ,coarse sand and stone ballast 10 to 20mm in beam, column,slab etc. including cost of all material, labour and T&P etc. complete. As per direction of Engineer in charge.

Mixing & Laying P.C.C.1:3:6 with cement ,coarse sand and stone ballast 10 to 20 mm in boundary wall including cost of all material,labour, T&P etc. complete . As per direction of Engineer in charge.

Plastering 1:4 C.M with cement and yamuna coarse sand ( F.M > 2.0) on wall including cost of all materials, labour and T & P etc. required for proper completion of work as per direction of Engineer- in- charge.

White washing three coat on new surface including cost of all material, labour and T&P etc . required for proper completion of work as per direction of Engineer- in- charge.

Painting two coat water proofing cement paint of approved make such as snowcem,durocem and supercem on new wall surface including cost of all material , labour and T&P etc. required for proper completion of work. As per direction of Engineer- in- charge.

Providing and fixing in position angle iron section including cutting ,drilling etc. including cost of all material, labour and T&P etc. required for proper completion of work.As per direction of Engineer- in- charge.

Providing and fixing stretching G.I barbed wire per R.M of 12 gauge X 12 gauge in proper position in post including cost of all materials, labour and T&P etc. required for proper completion of work. As per direction of Engineer- in- charge.

Fabrication and fixing of mild steel iron work in gate, including cutting, driling , welding , reweting and fixing hinges where necessary with fixing in position including cost of all material , labour and T&P etc. required for proper completion of work with one coat of red oxide primer.

Painting two coat of synthetic enamel paint on new surface (excluding cost of primer ) superior quality such as luxol higloss, apcolite, superiac and dulux including cost of all material, labour and T&P etc. required for proper completion of work.

Supplying and fixing of Door and windows including painting as directed by Engineer in charge. Door D-1 (1.20x2.10M)

Supplying and fixing of Door and windows including painting as directed by Engineer in charge. Door D-2 (0.75x2.10 M)

Supplying and fixing of Door and windows including painting as directed by Engineer in charge. Window W-1 (1.35x1.50 M)

Supplying and fixing of Door and windows including painting as directed by Engineer in charge. Window W-2 (1.00x1.35 M)

Supplying and fixing of Door and windows including painting as directed by Engineer in charge. Ventilator size (0.30x0.60 M)

Providing and fixing European type white glazed earthen ware 1st quality lSI marked W/C pan bakelite sheet cover and lid with C.P. Brass sand including cost of all materials, As per direction of Engineer-in-charge.

Providing and Fixing 10 Its. Low revel P.V.C cistern of standard approved make complete with all accessories and fittings. As per direction of Engineer-in-charge.

Providing and Fixing white vitreous chine flate back urinol size 500X380X350 mm with slip , pvc flushing cistern on M.S. Braced with C.P. Brass fitting flush pipe including cost of all material .As per direction of Engineer-in-charge.

Providing and Fixing mirror of size 600x450 mm including cost of all material, labor T&P etc,As per direction of Engineer-in-charge.

Providing and Fixing brass towel rail 750X20 mm including cost of all material, labor T&P etc. As per direction of Engineer-in-charge.

Providing and Fixing wash hand basin 550x400 mm size vetrious china including cutting hole & complete in all respect. As per direction of Engineer-in-charge.

Providing and Fixing stainless steel kitchen sink 410x200x80 mm with all fittings.As per direction of Engineer-in-charge.

Providing and Fixing PVC over head tank 0.5KL Tank capacity in any approved brand such as sintex including all cost of material and manpower. As per direction of Engineer-in-charge

Providing and Fixing G.I Pipe 25 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete including cost of material. As per direction of Engineer-in-charge

Providing and Fixing G.I Pipe 15 mm dia pipe complete with fitting & clamps, including cutting and making grooves the walls etc. complete including cost of material.As per direction of Engineer-in-charge

Providing and Fixing G.I.Tee 25 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge

Providing and Fixing G.I. Elbow 25 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge

Providing and Fixing G.I.Socket 25 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge

Providing and Fixing G.I. Reducing Tee 25X25X15 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge.

Providing and Fixing G.I. Cross Tee 25 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge.

Providing and Fixing G.I.Tee 15 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge.

Providing and Fixing G.I. Elbow 15 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge

Providing and Fixing G.I.Socket 15 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge

Providing and Fixing G.I. Cross Tee 15 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge

Providing and Fixing Brass ferrule 15 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge

Providing and Fixing 15 mm dia angle cock ISI marked including cost of all material.As per direction of Engineer-in-charge.

Providing and Fixing nahani trap with jali including cost of all material.As per direction of Engineer-in-charge.

Providing and Fixing C.I. bib cock with brass rod 15 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge.

Providing and Fixing Stop cock 25 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge.

Providing and Fixing Stop cock 15 mm dia ISI marked including cost of all material.As per direction of Engineer-in-charge.

Providing and Fixing G.I. nipple 50 mm long 15 mm dia ISI marked including cost of all material. As per direction of Engineer-in-charge.

Providing and Fixing C.P. brass Shower with isi mark including cost of all material. As per direction of Engineer-in-charge.

Providing and Fixing PVC pipe for drain and septic tank and W.C. including cost of all material. As per direction of Engineer-in-charge.

Wiring point for light with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire in side the conduit and piano type switch etc. Complete in all respect . As per direction of Engineer-in-charge.

Wiring point for fan with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire in side the conduit and piano type switch etc. Complete in all respect . As per direction of Engineer-in-charge.

Wiring point for Plug with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire in side the conduit and piano type switch & socket itc. Complete in all respect . As per direction of Engineer-in-charge.

Wiring point for power Plug/H-P.M.V./Sodium vapour lamp with 2.5 sq. mm. FR PVC insulated multistrand copper conductor cable or earth wire in side the conduit and piano type switch itc. Complete in all respect . As per direction of Engineer-in-charge.

Supply and fixing of 32 Amp. 240 V metal Clad Rewirable type switch fuse unit on M.D.F.E.G teak wood frame complete in all respect complete in all respect. As per direction of Engineer-in-charge.

Supply and burying earth electrode for lighting conductor of 900 mm × 900 mm × 6 mm G.I. plate vertically for earthing with its top at least 3M. below ground level complete with 20 mm dia G.I. pipe for watering funnel, 30 cm. square Cl, frame with hinged cover, masonry housing, alternate layers ofcoke/charcoal and salt at least. As per direction of Engineer-in-charge.

Supply and Fixing factory wired H.P.F cut off type street light lantern complete with moulded arcylic cover internal control gear , 250 W H.P.MV-lamp and G.I pipe bracket etc. complete in all respect of Philips/Bajaj/Havells/Cromp. As per direction of Engineer-in-charge.

Supply and laying of Aluminum conductor PVC insulated amoured sheathed cable 1100 volts, in open and along the ground, grout with MS clamps of suitable size as directed by Enginner - in - Charge, complete in all respect, Armouring. (10 sq mm cable laying in open ,along the ground) as per S.O.R. CH. NO.XXII-13-7(b) As per direction of Engineer-in-charge.

Supply and laying of Aluminum conductor PVC insulated amoured sheathed cable 1100 volts, in open and along the ground, grout with MS clamps of suitable size as directed by Enginner - in - Charge, complete in all respect.As per direction of Engineer-in-charge.

Supply, Installation, Testing and Commissioning of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019),THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. As per direction of Engineer-in-charge.

Supply and fixing of factory wired H.P.F. box type fluorescent tube light fitting suitable for 1 ×40 watt fluorescent tube complete including tubes etc. on surface, complete in all respect As per direction of Engineer-in-charge.

Transportation of RIG Machine And its T & P with Loading Unloading and manual sifting of clamp and eqipapages at site and return back after completion of work.As per direction of Engineer-in-charge.

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay. (i) 0 to 10 m . As per direction of Engineer-in-charge.

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay. (ii) 11 to 20 m . As per direction of Engineer-in-charge.

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay. (iii) 21 to 30 m. As per direction of Engineer-in-charge.

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay. (iii) 31 to 40 m. As per direction of Engineer-in-charge.

Boring and drilling with RIG machine, boring 15 cm dia up to 40 m depth in average type strata containing sand, medium dry clay. (iv) 41 to 50 m. As per direction of Engineer-in-charge.

Supply and lowering of 150mm dia PVC casing pipe with ISI mark incluiding all cost of material and Labour etc. As per direction of Engineer-in-charge.

Supply and lowering of 150mm dia PVC casing slotted pipe with ISI mark incluiding all cost of material and Labour etc. As per direction of Engineer-in-charge.

Supply stone grid (4.75 mm to 10mm) including filling surrounding in bore well. As per direction of Engineer-in-charge.

Development of bore by air compressor.As per direction of Engineer-in-charge.

Supply and installation 32 mm dia PVC column pipe 10 Kg/cm2. As per direction of Engineer-in-charge.

Supply and installation of 1 HP water filled submersible Pump set Approved make complete with starter panel etc. As per direction of Engineer-in-charge.

Supply and fixing of 32 mm dia 1 pair Iron Clamp.As per direction of Engineer in charge.

Supply and fixing of Submersible Cable 2.00 sq mm Finolex make.As per direction of Engineer in charge.

Supply and fixing of Elbow 32 mm dia As per direction of Engineer in charge.

Supply and fixing of Nipple.As per direction of Engineer in charge.

Supply and fixing of Bore end Cap 100 mm.As per direction of Engineer in charge.

Supply and fixing of Bore Cap 100 mm. As per direction of Engineer in charge.

Supply and fixing of Gate valve.As per direction of Engineer in charge.

Supply and fixing of Nilon mesh and dori.As per direction of Engineer in charge.

Supply and fixing of high tensile steel Supporting wire.As per direction of Engineer in charge.

M/s Mishra Construction Company Pro. Ratnesh Kumar Mishra (BID ID -4723941)