SPL REPAIR TO BLDG NO. P-5 AND P-6 (SINGLE OFFRS ACCN) OF 5171 ASC BN UNDER GE (NORTH) UDHAMPUR.

Amount

Demolition of cement concrete (un-reinforced) as in roofs of existing water proofing treatment of any type and thickness, complete all as specified and directed.

M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc. for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed.

M&L for apply bituminous primer confirming to IS-3384 @ 0.40 Kg/Sqm on prepared surface on sunny day. After the primed surface has dried then apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS-702 @ 1.20 Kg/Sqm on the surfaces then provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm, minimum weight of membrance shall be 3 Kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150mm & side lap of 75mm bonded with hot blown bitumen, over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20 Kg/Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bitumen coat with two coats of aluminium paint, complete all as specified and directed. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

M&L for 15mm thick rendering in Cm 1:3 on fair faces of brick work or concrete surfaces or roof surfaces (Accessable roof / Non Accessable roof) with using water proofing compound, finishing the surface even and smooth w/o using extra cement, complete all as specified and directed.

Demolition of cement concrete (reinforced) of paradise, roofs, floors, beams, staircase, landing, chajjas and wall, by manually or mechanical means of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including grinding and polishing with rounding to edges of stone slabs one edg complete, laid/ fixed over and including 20mm thick screed be/ plaster CM 1:4, complete all as specified and directed.

Rounding off / moulding to edge (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in ground floor and paving, exe 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor / leveling course, complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry/ walls, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be shall be measured and paid separately under respective item.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and smoothening the surface with sand paper / mechanised sanding and applying two coats of oil bound distemper over and including 2-3mm thick wall care putty, complete all as specified and directed.

M&L for preparation of new or old surfaces of any description and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 Gram/litre and UV resistance as per IS-15489:2004, alkali & fungal resistance, dirt resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer @ 0.90 litre/10 Sqm over and including 2-3mm thick wall care putty, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work or cut holes for taking out hold fasts and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work or cut holes for taking out hold fasts and making good disturbed surface to match with existing surface, complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 (Nominal Mix) type A-1 as in slabs supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves etc, complete all as specified and directed.

Use and waste of formwork to edges of concrete (rough finished) flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work, exc 5cm but not exc 10cm wide, complete all as specified and directed.

Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc, complete all as specified and directed.

S&F powder coated (of approved colour) aluminium (minimum thickness of powder coated 50 micron) as in shutter of windows, ventilators, openable/ louvers, fixed/sliding type without sash bars, aluminium section not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws, rolling for smooth moving & locking arrangement etc. fixed to wall including preparation of disturbed portion both side (internal & external surfaces of wall) to match with existing surface and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed.

M&L for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading, screws etc. complete all as specified and directed.

M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections / appropriate 'Z' sections and other sections of approved, make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket, complete all as specified and directed.

S&F aluminium deco grill of 5 to 6mm dia size of mesh not exe 7.5cm in either direction including anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete as per site requirement and direction of Engineer-in-Charge.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

Dismantling of cast iron or reinforced concrete drain pipes, any size up to 100mm bore, jointed in cement mortor and taking out from trenches (if required), complete all as specified and directed.

S&F 150mm x 150mm size salt glazed stoneware gully traps, square or round mouthed, type ‘P’ and jointed, ISI marked, complete all as specified and directed.

S&F 100mm bore sand cast iron soil, waste and vent pipes in any length with or without ears with cement joints, fixed to wall with MS clamps of suitable size, complete all as specified and directed.

S&F in replacement of 100mm bore cast iron bends/ reducer (any radius), diminishing pieces or tapers (larger bore measured), complete all as specified and directed.

Fixing only 100mm bore cast iron bends (any radius), measured larger bore includiing dismantling old one, complete all as specified and directed.

S&F in replacement of 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with oval accessed door, complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in cover slabs (for manholes/ drain etc) and similar articles with plain faces as requied for drain cover, set in cement mortar 1:6, complete all as specified and directed.

M&L for 150mm reinforced cement concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

Cutting into existing manholes for connecting new drains of 150mm dia (internal bore) and making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate), smooth finished and reforming benching as required, complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes of 150mm dia (internal bore) including packing under and hunching against the sides of pipes after they are laid and tested, complete all as specified and directed.

Dismantling of 150mm bore cast iron or reinforced concrete drains pipes, jointed in cement mortar and taking out/down from trenches/ walls if required, complete all as specified and directed.

Excavation in trenches in any type of soil, not exc 1.5 mtr deep and not exc 1.5 mtr wide for foundation, shafts, cills, cesspits, mahnoles, laying of under ground cable, pipe, electric pole and getting out, complete all as specified and directed.

Returning, filling in including spreading, leveling and well ramming in layers not exc 25cm in thick, complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each) and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars, 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

Supply only water proofing compound.

S&F aluminium extruded section hydraulically door closer regulated, designation No.1 universal type, suitable for door shutter upto 700mm in width and of weight not more than 35 Kg, complete all as specified and directed.

S&F 75mm long mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section of size 200mm, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section of size 150mm, complete all as specified and directed.

S&F 100mm long alunminium handle, cast type, oval shape, complete all as specified and directed.

S&F 150mm long alunminium handle, cast type, oval shape, complete all as specified and directed.

S&F 150mm size door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening and fixed at site, complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style), consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site, complete all as specified and directed.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6, complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) as filling in hollow pressed steel frame, hold fasts and similars articles, complete all as specified and directed.

S&F factory made 2nd class hard wood 35mm thick flush door shutters, solid panel construction with both commercial type plywood face on both sides, exterior grade as per IS-22002 of 1983 (Part-I). Flush door shutters shall be internally lipped as per clause 8.21 of SSR Part-I (2009), complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo, dado and skirting etc. on brick, concrete or stone walls including racking out joints, hacking for key and scrubbing down and removing serviceable tiles to store and rubbish off the premises etc, complete all as specified and directed.

M&L for 10mm thick vitrified ceramic tiles, light shade (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 10mm thick vitrified ceramic tiles, light shade (square/ rectangular) polished, area of each tiles not exc 0.36 Sqm as on vertical surfaces such as skirting / dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:3, complete all as specified and directed.

M&L for 7-8mm thick non skid ceramic coloured tiles (square / rectangular), area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm as in floors with skirtings, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for glazed ceramic coloured tiles, size 450x350x7mm / 350x250x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

S&F in replacement stop valve, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends, fixed to 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement stop valve (concealed type), fancy type, chromium plated, cast copper alloy with long shank & cup etc, fixed to 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement chromium plated tubular towel rail, 'D' type, 600mm long between flanges, complete all as specified and directed.

S&F in replacement soap dish of stainless steel, size 160x160x90mm, fixed to wall with chromium plated brass screws, complete all as specified and directed.

S&F in replacement of 15mm dia bib tap, cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in replacement PVC connection of 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down, high pressure with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve, float and handle and 15mm dia PVC connection pipes of 450mm long, complete all as specified and directed.

Dismantling water tank and remove to store of capacity exc 500 ltrs but not exc 1000 Ltrs with all necessary fittings, complete all as specified and directed.

S&F 1000 ltrs capacity tripple layered rotational moulded polyethylene water storage tank, white colour (cylindrical vertical with closed top) with, hoisted and fixed in position including nipple inlet and outlet and conneting pipes, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 25mm dia stainless steel curtain rod with brackets/ wall brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories, complete all as specified and directed. Note :- The cost of brackets and knobs shall be deemed to include in the quoted rates. Nothing extra shall be paid on this account.

S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work including welding, conforming to Fe-290 Gde-E-165, complete all as specified and directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, exc half brick but not exc one brick thick wall, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 as in floors, sub base of floor etc, complete all as specified and directed.

M&L for factory made, glossy finish, coloured chequred cement concrete tile of size 30cm x 30cm x 25mm thick each, machine pressed as in floors, set and jointed in neat cement slurry and jointing with white/ grey cement & pigments to match with tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for machine pressed rubber moulded manufactured / compacted by vibrating table method precast concrete interlocking paver block of any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

M&L for 25mm thick sand cusioning / filling under floors or under paver blocks, complete all as specified and directed.

S&F in replacement of viterous china wash basin, pedestral type, white flat back, size 550x 400mm including CP waste couping of 32mm dia, chain and plug and porcelan stopper and CI brackets of iron 65x65x6mm, embedded in PCC block with PCC 1:2:4 type B-1 and including 450mm long PVC waste pipe, complete all as specified and directed.

S&F in replacement of vitreous china bowl urinal, flat back of size 465x355x265mm white (miniumum) with grating & union for discharge pipe (excluding flushing cistern) including waste fittings, complete all as specified and directed.

S&F in replacement of vitreous china wash down water closet pan `One Piece' EWC with duroplast slim soft close seat cover, size 650x345x720mm, Siphonic Jet Flushing Straight-line design, square bowl, concealed 'S' trap for better aesthetics, snow white - whiter than the whitest, complete.all as specified and directed.

S&F in replacement of health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed.

SF galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mm, complete all as specified and directed.

Dismantling wall and ceiling boards, fibre, pulp, insulation etc. or insulation boards / slabs / blankets, any thickness including cover fillets,complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement board ceiling, size of panel 605mm x 605mm each, designed ceiling as approved, conforming to IS-14862, type 'B', category three including snapgrid frame work, hold fasts, suspenders, complete all as specified and directed.

Dismantling of boarding of any description, fixed in any position with nails, complete all as specified and directed.

S&F solid PVC wall lining (Wall Paneling), consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame, complete all as specified and directed.

Taking down carefully the existing copper / aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc. by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturbed surface of walls, floors etc. to match with existing surfaces, complete all as specified and directed.

M&L for point wiring for one light, controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated and PVC unsheathed multistranded copper conductor cable FRLSH in and including concealed PVC conduit of 20mm dia medium duty ISI marked including sutiable new steel sunken boxes, modular frame and modular cover plate for fixing of modular switches as required point in the board, flush to surface including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting and chasing the surface and then making good the disturbed surface to match with existing surface, complete all as specified and directed.

All as per serial item No. 100.00 here-in-above but for one fan point, controlled by one way switch.

All as per serial item No. 100.00 here-in-above but for one bell / buzzer point, controlled by one other switch or independent one bell switch.

All as per serial item No. 100.00 here-in-above but for one 3/5 pin socket outlet, 5/6 Amps on independent board.

All as per serial item No. 100.00 here-in-above but for 3 pin socket outlet 5 Amps on same board.

All as per serial item No. 100.00 here-in-above but wire size 2.5 Sqmm to controlled the 3/5 Pin 5/15 Amps socket outlet (modular type) on independent board and providing earth continuity wire using PVC insulated, FRLSH 1100 volts grade unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm.

S&F modular switch, single pole, one way, 10 Amps, 1 module, complete all as specified and directed.

S&F modular switch, single pole, one way, 16 Amps, 1 module, complete all as specified and directed.

S&F modular socket 6 Amp 2/3 Pin combined, 2 module, complete all as specified and directed.

S&F bell push switch, 2 module with indicator, complete all as specified and directed.

S&F modular socket, 6/16 Amps, 2/3 Pin, flush type, 2 module, complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC / polycarbonet, isolated body, complete all as specified and direcetd.

S&F modular electronic fan regulator, two module, step type, 60 watt, 230 volt and making all necessary connections, complete all as specified and directed.

S&F bell, ding dong type, AC, 230 volts, single pole, complete all as specified and directed.

S&F rigid non metalic PVC conduit of 20mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. for telephone wiring, complete all as specified and directed.

S&F RJ 11 module telephone socket including modular plate, sunken box and necessary connection, complete all as specified and directed.

S&F 2 pair, 0.4mm PVC insulated, PVC sheathed annealed tinned copper conductor telephone wire, drawing in existing conduit, complete all as specified and directed.

S&F electric water heater, storage type, steel body with copper inner tank and heating element upto 2 KW, capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, Hot and Cold type water connection pipes etc, complete all as specified and directed.

S&F in replacement of LED bulk head (6500K) fitting of 10 Watt with CRI >, 80 efficacy : 120 Lm/W , IP-20, surface mounting type extruded aluminium body with diffuser, complete all as specified and directed.

S&F in replacement of 22 Watt LED light fitting, 230 Volts, high quality LED batten with aluminum extrusion housing with PC diffuser, CRI > 80, efficacy : 100 Lm/W, IP-20 complete including connecting up with flexible copper wire of suitable size from ceiling rose to LED, complete all as specified and directed.

S&F in replacement of LED light fitting mirror type with high out put diffuser, 2 feet, 10/12 Watt, 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, with CRI >, 80 efficacy : 100 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement of LED light fitting with high out put diffuser, 1 feet, 5 Watt, 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, with CRI >, 80 efficacy : 100 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement of building security LED light 35 Watt, 230 Volts AC (125 Ln/W), AC, enegry saving long life, made up pressure die cast aluminum housing with separate driver, compartment toughened glass having efficacy with IP-66 complete alongwith suitable size bracket, nuts, bolts and clamps, complete all as specified and directed.

M&L for submain wiring with two run single core 6.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit/ PVC casing & caping, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 6.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 6.0 Sqmm and one run 6.0 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

M&L for submain wiring with two run single core 4.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit/ PVC casing & caping, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 4.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 4.0 Sqmm and one run 4.0 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth plate with GI wire of 4mm dia by means of nuts, bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work, charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh all as shown in electrical plate No. 3 of SSR Part-I, connected to earthing test point terminal including testing on completion, complete all as specified and directed.

S&F 4mm dia GI wire as earth continuty conductor or main earth strip, fix to wall on batten or recess or chess or burrid in ground or any other indicated situation for loop earthing etc, complete all as specified and directed.

S&F PVC body air freshner fan, copper winded, AC, single phase, size 150mm sweep with louver including making necessary hole for fixing of fan, complete all as specified and directed.

S&F ceiling fan complete with blades, down rod with remote control opetated and accessories, 230 Volts, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current (BLDC) motor, complete all as specified and directed.

S&F in replacement SPN sheet metal steel powder coated distribution board for MCBs fitted with bus bar neutral link earth bar and din rail suitable for use on 240 Volts, 50Hz, double door, DB system, 8 way, complete all as specified and directed.

S&F MCB SPN 40-63 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed.

S&F MCB SP, 63 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed.

S&F sheet metal VTPN DB, suitable for 125 Amps MCCB, double door, 04 Way (optimum F1+12) with metal door, 415 Volts grade, IP-42 Protection Grade, fixed/ flush to wall and connections should be provide with necessary reducer lugs and making good disturbed surface to match with existing surfaces, complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volts, adjustable type, 125 Amps with breaking capacity, 16 KA, complete all as specified and directed.

S&F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volt, complete all as specified and directed.

Supply, laying/ fixing and testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 Core, as in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface and making good to the disturbed surface to match with existing surfaces and including taking out/ down existing cable, complete all as specified and directed.

Supply and laying 20 to 100mm dia DWC pipe (double wall corruguated) HDPE, PE-100, PN-4, confirming to IS:14930 (Part-II) alongwith necessary snap fit coupler for inter connection and size suitable protection for LT cable, complete all as specified and directed. Note :- Dia of DWC pipe shall be decided by EIC as per site requirement and cost for the same shall be deemed to include in the quoted rates.

S&F in replacement of Onload changeover switch, 4 Pole, 415 Volts, in sheet metal enclosure of capacity 100 Amps, complete all as specified and directed.

s l sharma and sons (BID ID -3491231)

TULSI RAINA AND SONS (BID ID -3491252)

M/S GURU DEV BUILDERS (BID ID -3497140)

RAMAN KUMAR (BID ID -3491311)