PROVN OF 02 X TOILET BLOCK ALONGWITH 01 X CHANGING ROOM AT 522 ASC BN, PROVN OF 02 X TOILET BLOCK BLDG NO P-20 AT 609 EME BN AND SPL REPAIR TO BLDG NO 20 AT ILP LOC OF 522 ASC BN UNDER AGE B/R-IV AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc or for shafts wells, cesspits, manholes,pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out loose/soft soil complete all as specified and directed.

M&L PCC 1:4:8 type D2 using 40mm graded aggregates as in foundation, filling and mass concrete complete all as specified and directed.

M & L brick work in fly ash bricks, straight or curved on plan exc 6 m mean radions built in modular brick with CM 1:6 complete all as specified and directed.

M&L removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point soil complete all as specified and directed.

M&L returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

M & L filling of earth under floors spreading and levelling in layers not exceeding 25 cm thick with well ramming including watering and consolidation complete all as specified and directed.

M & L hard core of with borken brick not exceeding 63 mm, deposited , spread and levelled in layer not exceeding 15 cm thick , watered and rammed to a true surface complete all as specified and directed.

M&L Plain cement concrete 1:4:8 type D2 using 40mm graded agg 75 mm thick as in sub base of floor etc complete all as specified and directed.

M & L Reinforced cement concrete (RCC) M-25 (Design mix) using 20mm graded stone aggregate as in foundation, footings, plinth beams, bases for column and mass concrete complete as specified and directed.

M & L RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in roofs, landings, balconies complete all as specified and directed.

M & L RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, posts complete all as spcified and directed.

M & L RCC M-25 (Design mix) using 20mm graded stone aggregate as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed.

Use and waste of formwork for fair finished surfaces of concrete, flat to side of concrete foundation, footing, base of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar works vertical or to batter etc complete all as specified and directed.

Use and waste of formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work vertical or batter etc complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams for fair finished surfaces of concrete etc complete all as specified and directed.

Use and waste of formwork to sides of columns for fair finished surfaces of concrete etc complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, RCC/PCC bands in walls for flat fair finished surfaces of concrete width exc 10cm but not exc. 20cm complete all speciifed and directed.

M&L TMT Bars 10mm dia and over cut to length bent to shape required inculding cranking bending spirally hooking for columns etc and binding with MS wire ennealed less than 0.9mm dia complete all as specified and directed.

All as item No 19.00 here-in-before but 6 mm to 8mm for stirrups.

Material & labour 20mm thick rendering in CM 1:4 as on roof surfaces finished even & fair mixed with liquid water proofing admixture (WPC) @ 3% of weight of cement or as per manufacturer's instructions complete all as specified and directed. (WPC shall be measured and paid seperately)

Supply only integral water proofing admixture complete all as specified and directed.

Material & labour for cleaning of concrete surfaces and applying priming coat using with 3mm thick bituminous primer @ 0.30kg per Sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3.60 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed.

M&L for 5mm thick rendering on concrete surface as in ceiling, chajjas, facia etc in cement mortar 1:3, surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L for 15mm thick rendering on fair faces of brick wall or concrete surface in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L for 15mm thick rendering on other than fair faces of brick wall or concrete surface in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified & directed.

M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggragate) as in plinth protection, path etc finished the surface even & fair complete all as specified and directed.

M&L Plain cement concrete 1:2:4 type B0 using 12.5mm graded agg 25 mm thick for laying of floor etc complete all as specified and directed

M & L coloured shade Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick screed bed in CM (1:4) complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 15mm thick rendering in CM 1:4, complete all as specified and directed.

M&L precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in cover slab, cub shelves, Lintels etc set in cement mortar 1:4 complete all as specifed and directed

S&F 15mm bore GI tubing medium grade with all fittings and fixed to walls or laid on floor complete all as specified and directed.

All as item No 32.00 here-in-before but for 20 mm bore. complete all as specified and directed.

S & F 15mm dia Stop valves, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 15mm dia Stop valves, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15 mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F 15 mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F fancy type pillars taps, cast copper alloy with capstan heads CP fancy type screwed down high pressure with or without "Hot or Cold" with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

Supply & fix vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor complete all as specified and directed.

Supply & fix vitreous china wash down water closet pan (Pedestal pattern) white, with 'P' or 'S' trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor, fixed as in repair complete all as specified and directed.

Supply & fix PVC dual flushing cistern with double flush button Cat Part No. - C-002 Pearl/ CAT Part No B 1020101 Cera in 10 Ltrs as approved by GE/ Engineer-in charge.

S&F vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste but incluing brackets, CP waste couping , PVC Waste pipe 32mm dia etc complete all as specified and directed .

S&F tublar towel rail brass chromium plated , 20mm dia, D type 60cm between the fanges complete all as specified and directed.

S&F in repair tublar towel rail brass chromium plated , 20mm dia, D type 60cm between the fanges complete all as specified and directed.

Cutting chases, priming in making good to facing when required and pointing in CM 1:3 to ends of n. exc 10 cm girth in brick wall complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) 500 litres capacity hoisted and fixed in position with all fittings complete all as specified and directed.

Supply & fixing ball valve of 20mm dia, high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F cast iron floor/nahani trap with CP grating including jointing to waste pipe 100 mm dia fixed in cement concrete type B-1 (1:2:4) mix complete all as specified and directed.

M&L preparation of newly plaster surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L PCC 1:4:8 type C2 ,40mm graded agg., as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid & tested for 150 mm bore complete all as specified and directed.

M/L salt glazed stone ware drain pipes 150 mm dia (internal) laid in trenches and jointed complete all as specified and directed.

M&L preparation of newly plaster surface of wall and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plaster surface of ceiling and applying three coats of white wash complete all as specified and directed.

S&F 20mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and fix 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with mild steel clamps complete all as specified and directed.

Supply and fix in repair 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with mild steel clamps complete all as specified and directed.

Supply and fix 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with mild steel clamps complete all as specified and directed.

Supply and fix in repair 75mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall with mild steel clamps complete all as specified and directed.

Supply and fix in repair PVC (SWR) bend 110 mm dia complete all as specified and directed.

S&F in repair 75 mm PVC (SWR) bends fixed to wall/floor complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) vent cowl complete all as specified and directed.

Material & labour for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing.

Material & labour for factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togathers with solvent cement supplying & fixing the frame at site complete all as specified & directed.

Supply & fix butt hinges 100mm long medium weight cold rolled mild steel and fixed complete all as specified & directed.

Supply & fix 100mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

S&F aluminium handles 125mm size, cast type, anodised incl necessary screws complete all as specified and directed.

Supply & fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply & fix in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified and directed.

M&L for Sand cusioning filling under paver block / floors including watering & consolidation complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, With grey cement and no pigment, complete all as specified and directed.

S&F Providing and laying at or near ground level factory made kerb stone of nominal mix (1:2:4) cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

Taking down wooden chowkhats or frame not exceeding 1.5 Sqm each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F powdered coated aluminum window sliding type glazed or gauged of stainless steel wire cloth nominal dia of wire 0.56 mm and average width of aperture 1.18 mm along with aluminum grill 15 micron type DG-117 of make : Hindalco/Indalco/Jindal size of frame 125 mm x 44.5 mm of 18 gauge aluminum section with 15 micron anodizing size of shutter top bottom and side rail 44.5mm x 44.5 mm x 18 guage & 4.8 mm thick plain sheet glass to be fixed in glazed portion and stainless steel hooks & eye to be provided as stay of shutter etc complete including necessary jointing cleats glazing clips rubber packing anodized aluminum snap beading screws anodized aluminum fittings such as peg stay 150 mm long (01 No for each leaf) hinges type B-21 100 mm long (02 Nos for each leaf) suitable handle (01 No for each leaf ) and 100 mm aluminum tower bolt (2 Nos in each leaf ) complete all as specified and directed

S&F powder coated anodised aluminium Ventilators fixed type with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) including stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick tinted pin headed glass complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&f 2nd class hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors and frames/ chowkats; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe-410 or Fe-310 complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs Harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced) complete all as per specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate) as in sub base floor etc complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed in CM(1:6) complete all as specified and directed.

All as item No 89.00 here-in-before but herein over and including 10mm thick rendering in CM 1:4, as in skirting/dado complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded aggregate) as in bed block, copings, kneelers, apex stones, bed plates, water troughs and the like including cutting into bricks of stone wall as reqd for inserting hold fasts complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection, path including finished surfaces even and smooth without using extra cement complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed.

Supply and fix false ceiling with 4mm thick E board white prelaminated, set embossed reinforced designer ceiling board of oceanic texture fixed over and including GI grid frame work of size not more than 600x600 mm having 25mm wide t-section runner made of 0.33mm GI sheet and angle made 0.45mm thick GI sheet suspended with and including 4mm dia GI wire and leveling clips including two coat of oil distemper complete all as specified and directed. Note: All exposed surface of grid shall be powdered coated white.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on bricks or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

All as item No 97.00 here-in-before but herein except bricks

Dismantling of Asbestos cement / Fiber (corrugated,semicorrugated, etc.) sheet any description as in roof covering incl ridge and removing from site complete all as specified and directed.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F MS flat iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

S & F MS work as in framed work for roof trusses purlin rafter fastning distance pieces cleats etc (including fixing independently vertical post) complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying wall putty and two coat of oil bound distemper (OBD) over one coat of suitable primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying wall care putty and after applying two coats of Cement base paint over a coat of alkali resistence primer in any colour complete all as specified and directed.

M&L for preparation of new or previously untreated steel & iron surfaces of any description, not otherwise described over 10 cm width or girth and apply two coat of synthetic enamel paint over over a coat of red oxide primer complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 15mm thick with grey pigment cement and pigmnet , set, jointed and pointed in neat cement slurry in floors screed bed 15 mm thick CM 1:4, complete all as specified and directed.

Dismantling unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore pipe and removing from site complete all as specified and directed.

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete all as specified and directed.

S&F PVC Bath cabinet with mirror 18"x22"x4.25" complete all as specified and directed.

S&F in repairs, chromium plated towel rack of size 24" complete all as specified and directed.

S & F in repair for CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe Cat Part No.CERA F8030301. complete all as specified and directed.

S & F in repair Toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed.

S&F in repair 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and as directed.

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

Supply and fixing PVC Heavy Duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in repair 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level,white with inlet ball valve, float and handle including brackets and 32mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & fix PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F in repair CP brass soap dish complete all as specified and directed.

S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repair 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110mm PVC (SWR) 'S' trap complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair) complete all as specified and directed.

S&F Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F Stainless steel butt hinges 150 mm in size heavy weight, cold rolled mild steel, fixed with screws or with welding to existing frames, ISI marked, complete all as specified and directed.

Material & labour for point wiring with FRLSH- FLEXIBLE WIRING CABLE CONFORMING TO IS : 694-1990 PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in and including PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for one Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps.

All as item No 134.00 here-in-before but One ceiling fan/exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as item No 134.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as item No 134.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

All as item No 134.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed.

Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed.

Supply and fix decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified and directed.

Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt complete all as specified and directed.

Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body complete all as specified & directed.

Supply and fixing exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers complete all as specified and directed.

Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator compatible for BLDC fans and ccessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC) complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8way, with 100 Amps rated complete all as specified and directed.

All as item No 149.00 here-in-before but 100 Amps rated

Supply & fixing MCB SPN, AC, 240 volts of 40 to 63 Amps, C curve, 10 kA, complete all as specified and directed.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, complete all as specified and directed.

Supply and fixing LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including making connections complete with bracket fitting made out of GI pipe medium grade including clampsand nuts and bolts complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty complete all as specified and directed.

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling and hard punning complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site complete all as specified and directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 125 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc complete all as specified and directed.

Supply and fixing Isolator 4 pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed .

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLSH- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length.

Supply, laying commissioning, testing of XLPE LT cable 1100 volts grade of size 10 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty complete all as specified and directed.

M&L for Ceiling fan hook made from steel structural, bracing support bend into shape for hanging of ceiling fan complete all as directed at site.

Please Enable Macros to View BoQ information