Additional improvement works to the kitchen building and smart class at model school at subramaniyam road in ward no.72 of west zone.

Amount

Removing the damaged old cement sheet

Removing the exisiting damaged window

Shifiting of Lathe machine from the smart classroom by the direction of departmental officers

Dismantling the damaged brick work in cm

Dismantling the damaged CC flooring in cm

Scrapping the damaged plastering in cm

Plain Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard blue granite metal by volume for levelling course in foundation trenches manholes inspection chambers etc., including charges for scaffolding , shoring , strutting, bailing out water if necessary ramming , consolidating cuing etc., cost and conveyance of all materials complete in all respects complying with relevant standard specifications at all leads &lifts inside the building

Brick work in cement mortor 1:5 mix (one cement,five sand) using II class table moulded bricks to a size of 9"x4 3/8"x2 3/4" including cost and conveyance of all materials and labour charges for mixing the mortor, constructing, curing to required period and wherever the masonry projection is necessary for elevation shall be done with out extra cost etc complete as per std spn.

Plastering with cement mortor 1:3 mix (1 part cement and 3 part sand) of 20mm thick including scaffolding etc complete

Providing flooring with double charge MAT finish Vertified tiles in cm 1:3 mix of approved brand and colour including pointing with colour cement etc complete

Flooring with Vitrified Tiles of size 600x600x6mm thick in CM 1:3 Mix 20mm thk. of approved brand and colour including pointing with epoxy grouting etc complete

Providing Walls skirting in cm 1:3 mix ( one part cement three sand ) including pointing with coloured cement etc complete

Flooring with Ceramic tiles in CM 1:3 Mix 20mm thk. of approved brand and colour including pointing with coloured cement etc complete

Daddoing the walls with first quality approved colour glazed tiles with printed design of 30x30x6mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete

Supply and Fixing of caddappa slab of approved quality andColour of size all floors over 20mm thick cement mortar 1:3 (One cement and three Sand) base above the Existing bed Concrete and Pointed with same colour cement added

Supply and fixing of 3mm MS sheet design cutting with CNC laser

Supply and fixing of MS Pipe including cast and conveyance of the material and labour charges for cutting,bending,welding and fixing etc complete

Supply and fixing of steel grill using L angle and weld mesh using 10 Gauge steel wire including cost and conveyance of the materials and labour charges for cutting welding and fixing in position etc

Supply and laying of Galvolume sheet roofing of 0.45 mm thick cost including laying using steel screws with necessary washers and labour charges

Brick work in cement mortor 1:3 mix (one cement,three sand) using II class table moulded bricks to a size of 9"x4 3/8"x2 3/4" including cost and conveyance of all materials and labour charges for mixing the mortor, constructing, curing to required period and wherever the masonry projection is necessary for elevation shall be done with out extra cost etc complete as per std spn.

Plastering with cement mortor 1:5 mix (1 part cement and 5 part sand) using 12mm thick

Providing the Grid ceiling of size 600x600mm and aluminium channel and angel including cast and conveyance of the materials and labour charges for cutting with fixing in position with all other require materials like screw , using driller etc complete

Supply and fixing of false ceilling with zip board of size 1.8m x 1.2m x 12mm and aluminium channel and angel including cast and conveyance of the materials and labour charges for cutting with fixing in position with all other require materials like screw , using driller etc complete

Supply of U-Pvc Casement Window with Netlon at site by using with U-Pvc Profile JP 017 (58mm x 60mm 1.00 kg/m) for the outer frame .Total breadth is being divided equally in to two three or four openings (as per drawing).By using U-Pvc Profile JP 015 (78mm x 60mm 1.15 kg/m) for the shutters and the Mullion use U-Pvc Profile JP 019 (72mm x 60mm 1.20kg/m) and completed by fusion welding. All the shutters are fitted with 5mm clear glass with suitable U-Pvc glass bead. The windows are properly fitted with imported quality handles,SS 304 grade steel friction hings & Espengnett. use EPDM Material as gasket. All the profile are Reinforcement with 1.2mm GI Steel. Imported Anchor Fastners are being used to fix in the wall and fill with imported White sealant.

Medium dencity fibre (MDF) Board - Exterior grade both sides pre laminated including externallipping with kiln dried soft wood 35mm thick

Stainless steel (Salem Stainless steel) door frame (Box section using stainless steel plate of 1mm thick) of size 100X60mm with a rebate of 30/35 mm X 15mm on one side of the frame including supplying and fixing dovetail splayed and tainless steel hold fast etc.,

Supply and Apply of wall putty of approved brand and quality including cost and conveyance of the material and labour charges for applying three coats of wall putty and gentle rubbing with the emery sheet to make the surface smooth and clean etc Complete

Painting with plastic emulsion paint two coats along with base coat of approved quality (ISI Standard) paint as per the standard specification. (The paint to be used should be got approved by the Executive engineer before use on work)

PAINTING new IRON WORKS for doors, windows and Ventilators, Iron bars Weld mesh, wire mesh, screen, steel bars, flats and other similar works etc., with TWO COATS of approved first quality of synthetic enamel paint over a base coat of red oxide primer in all floors. The rate is inclusive of cost of all materials and labour, brushes and scaffolding charges etc., complete complying with standard specification. The paint to be used should be got approved by the Executive engineer before use on work.

Supply and Fixing of MCB Box of approved brand and quality

6way MCB Box

26way MCB Box

Supply and Fixing of MCB of approved brand and quality

63A 4 pole MCB

40A double pole MCB

20A Single pole MCB

Supply and run off 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour

Supply and run off 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed CU conductor of 1100V grade in rigid PVC pipe concealed in wall and ceilling with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A.F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour PVC concealed light or fan point

Wiring with 2x15 Sq.mm (22/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 5A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC plug point

Wiring with 2x4 Sq.mm (56/0.3) PVC Insulated SC unsheathed CU conductor of 1100V grade in Suitable PVC rigid pipe concealed in wall and ceilling with PVC accessories in flush with wall with 150mm x100mmx113mm TW switch box with 3mm thick hylum sheet cover for 15A.3PIn non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of concealed portion with suitable colour for concealed PVC Power plug point

Supply and Fixing of 4' 20W LED tube light fitting of approved brand including labour charges for fixing in wal and ceiling with necessaey accessories like clips,screw etc., complete

Supply and fixing of 36 Watts LED Fancy Type Streetlight Fitting of approved quality and brand including cost and conveyance of the materials and labour charges for making holes and fixing in position with bentup 25mm GI pipe 'B' Class and all other required materials like clamp, screw, bolt and nuts etc complete

Supply and fixing of 1200mm (48") AC ceilling fan complete with energy saving fan of 28 watts, regulator with 0.3 meter down rod on the existing clamp of approved brand and quality etc., complete

Supply and fixing of 300mm sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and Fixing of Surface light of size 600x600mm of approved colour and brand etc complete

Supply and Fixing of Wall mounting fan of approved colour and brand etc complete

Supply and providing of 1000 litres capacity priming tank made up pf PVC make : SINTEX / EQUIVALENT

Conveyance of debries from 0 to 15KMs lead

A.P.R CONSRTUCTION

K MANI

AMMAN BUILDERS