Construction of New 33 KV Underground Line and other Work

Amount

PART - A- MATERIAL

S.T. Pole – 11 Mtr. Long

33 KV ‘XLPE’ Cable 3x300mm²

33 KV ‘XLPE’ C/J Kit 3x300mm² Straight through

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

Barbed wire

Bolts, Nuts, & Washers

Top channel clamp with nut bolt for ST Pole 11 mtr with nut bolt by 50x8 mm MS flat Iron make

Stay Clamp for ST Pole 11mtr. with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay Rod 20x1800 mm

Stay wire 7/8 SWG

MS Earthing Rod 20x2500 mm

33 KV Polymer Disc Insulator 70 KN B&S Type

Disc fitting 70 KN B&S Type for DOG

P.G. Clamp for DOG

M.S. Angle Iron 65x65x6mm bracing.

33 KV M.S. bracing Angle Iron 65x65x6 mm clamp with nut bolt for 11 Mtr ST Pole (Top side) by 50x8 mm MS flat Iron make

33 KV M.S. bracing Angle Iron 65x65x6 mm clamp with nut bolt for 11 Mtr ST Pole (Bottom side) by 50x8 mm MS flat Iron make

33 KV. Top channel (125x65mmX3200 mm (10.7 Kg/m)

GI Wire 5 mm

Special Pipe for Cable earthing

PART - B- WORK

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) for each line by digging pit & making trench in Proper size (1.5M depth x1.5M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks / HDD Mathod can be used as per site required.

Laying of 33KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3m long Complete work (Include with Pipe).

Special GI Pipe Earthing Complete Work for 33 KV ‘XLPE’ C/J Kit.

Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, Alluminium paint, red oxide paint, barbed wire earthing, etc. complete.

Jointing charges of 33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

Jointing charges of 33 KV ‘XLPE Jointing Kit Straight through 3x300 mm².

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Digging existing Cable out of ground (4 No Cable) for jointing of new cable.

Dismentling charges of existing Single Pole 11 mtr. ST Pole.

Dismentling charges of existing Double Pole 11 mtr. ST Pole.

Dismentaling of old ACSR dog conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old and damaged 33 KV Line materials from work site to store centre Gorakhpur Distt. Gorakhpur.

Road destortion charges with HDPE Pipe.

Providing 33 KV Cable Route Marker & inserting in ground with proper grouting (Provided by Contractor & Cable Route Marker is made by stone Plate).

Making RCC cable duct (6ft x 6ft) and covering with RCC slab for safety purpose of U/G cable & C/J Straight through

Loading Unloading and Carriage of Dismentaled scrape, Damaged material from Work site to Electricity Store Centere Gorakhpur.

M/S SHUKLA ENTERPRISES