Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹82.7 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹1.1 Cr+₹25.1 L (30.4%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | Rejected-Technical NEW DELHI | - | Rejected-Technical Not Qualified |
| Sl No | Description | Qty | Unit | bhagwan engineering works L1 | MS EASTERN OFFSHORE ENGINEERS L2 |
|---|---|---|---|---|---|
| 1.00Dry Docking Repair of Pantoon Barge (25M X 6M) | |||||
| 2.00 | To quote for docking,undocking & placing of the barge on the blocks inexisting the dry dock/slip-way of PPA. | 35,737 | Days | 20 ₹7,14,740 Lowest | 28 ₹10,00,636 |
| 3.00 | Gauging to be done by IRS certified firm (minimum 100 points) | 100 | Nos. | 120 ₹12,000 | 25 ₹2,500 Lowest |
| 4.00 | To scrap, power clean the side plates, floors and ceiling of all tanks to remove rusts,dirts and old paints for inspection of bare steel surface and paint with 2 coats of primer, 2 coats of finish tank guard DW paint. | 685 | Sq. Mtr. | 220 ₹1,50,700 Lowest | 400 ₹2,74,000 |
| 5.00 | Scrapping, power cleaning and grit blasting of entire hull, ship side and main deck plating to show bare steel surface with standard of SA 2.5 (copper grits). | 488 | Sq. Mtr. | 450 ₹2,19,600 Lowest | 650 ₹3,17,200 |
| 6.00 | Painting of underwater portion of the hull with 6coats of Epoxy Paint by airless spray on rust free surface. (2Coats primmer+2coats sealer+2 coats Anti fouling/Finish | 172 | Sq. Mtr. | 250 ₹43,000 Lowest | 300 ₹51,600 |
| 7.00 | Painting of above water level portions and main deck plates with 6coats of Epoxy Paint by airless spray on rust free surface (2 Coats primmer+2 coats sealer+2 coats deck finish) | 276 | Sq. Mtr. | 220 ₹60,720 Lowest | 300 ₹82,800 |
| 8.00 | To qoute for Steel Renewal:-
Steel Plates along with frames, beams, brackets and all the required fittings shall be renewed at following locations as per the normal practice of ship construction / IRS Construction Rules:
(a) Hull Plates (Under Water & Above Water)
(b) Main Deck Plates
(c) Under Deck Bulk Heads
(d) Steel Fender all around the ship side.
(g) Steel structure as required by PPT
Firm to Quote above steel renewal including cost of Steel Plates per Ton Basis. M.S. Plates and angles of 10mm/ 8 MM/6MM thickness will be used for renewal of plates. The M.S. Plates are to be of approved type for Ship Construction ( No.IS 2062). IACS approved welding rod to be used strictly and use of no other welding rods shall be accepted. Before starting any plate renewal, certificate from manufacture to be submitted and physical inspection of plates to be done. Pressure/DP test to be done in presence of authorized person of PPA as required. | 12 | Tons | 1,10,000 ₹13,20,000 Lowest | 1,25,000 ₹15,00,000 |
| 9.00 | To quote for renewal of hatch cover on deck (610mm x 1270mm x 6mm),(900mm x 900mm x 6mm) with SS nuts and bolts. | 2 | Nos. | 1,500 ₹3,000 Lowest | 8,000 ₹16,000 |
| 10.00 | Removal of old fenders from ship side and fabrication and fitting of 3 rows of new D-Type steel fenders at ship side. Specification:- (1/2 circle, steel fenders of size:- Height from ship side-350mm, width- 175mm, plate thickness-12mm. Firm to quote with materials. | 168 | Mtr. | 5,500 ₹9,24,000 Lowest | 8,400 ₹14,11,200 |
Tender Value
₹93.5 L
EMD Value
₹1.9 L
Closing Date
3 Sept 2025, 5:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HM,PPA
Marine Department Paradip Port Authority pin-754142 ph-06722-296106
Dry Docking Repairs of Pantoon Barge (25M X 6M) and Pantoon Barge (20M X 8M).
2025_MoS_873198_1
MD/ACCTS/WK/R-15/2025/1040
Open Tender
Marine Works
Works
40 days
paradip
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,770
Yes
As per eTCN and TD
₹1.9 L
Yes
15 Oct 2025
13 Aug 2025
4 Sept 2025
13 Aug 2025
3 Sept 2025
13 Aug 2025
Amount
Dry Docking Repair of Pantoon Barge (25M X 6M)
To quote for docking,undocking & placing of the barge on the blocks inexisting the dry dock/slip-way of PPA.
Gauging to be done by IRS certified firm (minimum 100 points)
To scrap, power clean the side plates, floors and ceiling of all tanks to remove rusts,dirts and old paints for inspection of bare steel surface and paint with 2 coats of primer, 2 coats of finish tank guard DW paint.
Scrapping, power cleaning and grit blasting of entire hull, ship side and main deck plating to show bare steel surface with standard of SA 2.5 (copper grits).
Painting of underwater portion of the hull with 6coats of Epoxy Paint by airless spray on rust free surface. (2Coats primmer+2coats sealer+2 coats Anti fouling/Finish
Painting of above water level portions and main deck plates with 6coats of Epoxy Paint by airless spray on rust free surface (2 Coats primmer+2 coats sealer+2 coats deck finish)
To qoute for Steel Renewal:- Steel Plates along with frames, beams, brackets and all the required fittings shall be renewed at following locations as per the normal practice of ship construction / IRS Construction Rules: (a) Hull Plates (Under Water & Above Water) (b) Main Deck Plates (c) Under Deck Bulk Heads (d) Steel Fender all around the ship side. (g) Steel structure as required by PPT Firm to Quote above steel renewal including cost of Steel Plates per Ton Basis. M.S. Plates and angles of 10mm/ 8 MM/6MM thickness will be used for renewal of plates. The M.S. Plates are to be of approved type for Ship Construction ( No.IS 2062). IACS approved welding rod to be used strictly and use of no other welding rods shall be accepted. Before starting any plate renewal, certificate from manufacture to be submitted and physical inspection of plates to be done. Pressure/DP test to be done in presence of authorized person of PPA as required.
To quote for renewal of hatch cover on deck (610mm x 1270mm x 6mm),(900mm x 900mm x 6mm) with SS nuts and bolts.
Removal of old fenders from ship side and fabrication and fitting of 3 rows of new D-Type steel fenders at ship side. Specification:- (1/2 circle, steel fenders of size:- Height from ship side-350mm, width- 175mm, plate thickness-12mm. Firm to quote with materials.
Fabrication and fitting of 12 nos of new man-hole cover with 20 nos new SS nuts and bolts each. Firm to quote with materials.
Fabrication and fitting of new vents on deck with flaps and butter fly nuts (SS).(D-2", H-1.5').
To remove of old Anodes. To supply and fitting of new Zinc Anodes fitted with MS welding arm (5.5 Kgs each) approx. with quality test certificates. Make- SARGAM. To submit quality certificate.
Fixing of new hooks on deck for tyre fenders. Firm to quote with materials.
To quote & supply following LLPS paints of RDSO / Lloyds'S Register approved for under water marine application.
Penguard epoxy primer
Intershild 300 Anti Corrosive
Safe Guard Universal ES Tie Coat
Sea Quantum Ultra Antifouling (Dark Red)
Top Coat Epoxy Green
Paint for FW Tank - (Two pack Solvent Free Epoxy coating Tank Guard DW)
Top coat paints (Grey-40 Ltrs, Black-80), ISI Mark.
Epoxy Thinner, ISI Mark.
Anti Fouling Thinner, ISI Mark
Dry Docking Repair of Pantoon Barge (20M X 8M)
To quote for docking,undocking & placing of the barge on the blocks inexisting the dry dock/slip-way of PPA.
Gauging to be done by IRS certified firm (minium 70 points).
To scrap, power clean the cellings,side plates, floors to remove rusts, dirts and old paints for inspection of all tanks and paint with 2 coats of primer, 2 coats of finish tank guard DW paints.
Scrapping, power cleaning and grit blasting of entire hull, ship side and main deck plating with standard of SA 2.5 copper grits to show bare steel surface.
Painting of underwater portion of the hull with 6coats of Epoxy Paint by airless spray. (2Coats primmer+2coats sealer+2 coats Anti fouling/Finish.
Painting of above water level portions and main deck plates with 6coats of Epoxy Paint by airless spray (2 Coats primmer+2 coats sealer+2 coats deck finish).
To qoute for Steel Renewal:- Steel Plates along with frames, beams, brackets and all the required fittings shall be renewed at following locations as per the normal practice of ship construction / IRS Construction Rules: (a) Hull Plates (Under Water & Above Water) (b) Main Deck Plates (c) Under Deck Bulk Heads (d) Steel Fender all around the ship side. (g) Steel structure as required by PPT Firm to Quote above steel renewal including cost of Steel Plates per Ton Basis. M.S. Plates and angles of 10mm/ 8 MM/6MM thickness will be used for renewal of plates. The M.S. Plates are to be of approved type for Ship Construction ( No.IS 2062). IACS approved welding rod to be used strictly and use of no other welding rods shall be accepted. Before starting any plate renewal, certificate from manufacture to be submitted and physical inspection of plates to be done. Pressure/DP test to be done in presence of authorized person of PPA as required.
Removal of old fenders from ship side and fabrication and fitting of 2 rows of new D-Type steel fenders at ship side. Specification:- (1/2 circle, steel fenders of size:- Height from ship side-350mm, width- 175mm, plate thickness-12mm. Firm to quote with materials.
Fabrication and fitting of 12 nos of new hatch cover with 20 nos new SS nuts and bolts each. Firm to quote with materials.
Fabrication and fitting of new vents on deck with flaps and butter fly nuts.(Dia-2",H-1.5')
Removal of old Anodes. To supply and fitting of new Zinc Anodes fitted with MS welding arm (5.5 Kgs each) approx. with quality test certificates. Make- SARGAM
Fixing of new hooks on deck for tyre fenders. Firm to quote with materials.
To quote & supply following LLPS paints of RDSO / Lloyds'S Register approved for under water marine application.
Penguard epoxy primer
Intershild 300 Anti Corrosive
Safe Guard Universal ES Tie Coat
Sea Quantum Ultra Antifouling (Dark Red)
Top Coat Epoxy Black
Top coat paints Grey, ISI Mark.
Paint for FW Tank - (Two pack Solvent Free Epoxy coating Tank Guard DW)
Epoxy Thinner, ISI Mark.
Anti Fouling Thinner, ISI Mark
MS EASTERN OFFSHORE ENGINEERS (BID ID -3277131)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .