Execution of civil works for development of educational infrastructure in 19 schools under PM SHRI Scheme. SH Construction of 2 Nos.Toilets,special repair of building fixing chainlinked fencing in the play ground of at GSS School Salogra, Distt. S

Cutting/Excavation in earth work by mechanical means (Hydraulic Excavator/manual means in all heights and depth in all kind of soil such as kankar,moorum, shingle and decomposed of soft or hard rock their intermiate classification of soils and chiseling / wedging out of rock where blasting is probihited including dewatering wherever required, setting out to required lines, levels as shown shown on the drawing as directed by the engineer in charge at site, according to the HPPWD specification of 1990 vol-1 as sorting out use full and unuseful material and stacking the same in all lead and lift and leveling of excavated earth on dumping sites (to be arranged by the contractor at his own risk and cost including payment of prescribed dumping charges of municipal committee/local body if any) through all modes of transportation including head load animal load and mechanical to maximum possible extends in all leads means along with levelling fine dressing and all labour, machinery, materials, tools equipments and safty measure and incidentels necessary to complete the work by mechanized means and labour (if any required). All useful materials such as stone, shingles, aggregate and slates shall be sorted along road site and lift through all modes of transportation and used/removed as direction of the engineer in charge. Any loss to the private and public property during the course execution will be restored by the contractor whatsoever the nature of the same may be the usable agrregate/ boulder /cutstone shall be taken in MAS Account anf further will be issued to the contractor as per issue rate mentioned under clause-43.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains in all depth, all kind of soil including saturated soil comprising of pick wok, jumper work where blasting is prohited in soft and hard rock and their intermiate classification of soils including dewatering wherever required, setting out to required lines, levels as shown shown on the drawing as directed by the engineer in charge at site, according to the HPPWD specification of 1990 vol-1 as sorting out use full and unuseful material and stacking the same in all lead and lift and leveling of excavated earth on dumping sites (to be arranged by the contractor at his own risk and cost including payment of prescribed dumping charges of municipal committee/local body if any) through all modes of transportation including head load animal load and mechanical to maximum possible extends in all leads means along with levelling fine dressing and all labour, machinery, materials, tools equipments and safty measure and incidentels necessary to complete the work by mechanized means and labour (if any required). All useful materials such as stone, shingles, aggregate and slates shall be sorted along road site and lift through all modes of transportation and used/removed as direction of the engineer in charge. Any loss to the private and public property during the course execution will be restored by the contractor whatsoever the nature of the same may be the usable agrregate/ boulder /cutstone shall be taken in MAS Account anf further will be issued to the contractor as per issue rate mentioned under clause-43.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas upto all depth and width including getting out and disposal of excavated earth including all lead and lift as directed by Engineer-incharge., when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing off all surplus excavated earth as directed by the Engineer-in- charge. Ordinary Rock

Excavating trenches of required width for pipes, cables,etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including onsolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, with all lead and lift

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including carriage of material in all leads & lifts.

Stone soling properly handpacked filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labour)including carriage of material in all leads & lifts.

Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 6 : 12 (1 cement : 6 sand :12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of material in all leads & lifts.

Providing and laying cement concrete 1 : 8 : 16 (1 cement:8 sand:16 graded stone aggregate 20 mm nominal size) and curing complete on slab & floor excluding cost of form work screed laid under floor including carriage of materialin all leads and lifts.

Providing and laying cement concrete 1 : 8 : 16 (1 cement : 8 sand :16 graded stone aggregate 40 mm nominal size) and curing complete under depressed portion including carriage of material in all leads & lifts.

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including carriage of material in all leads and lifts.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including carriage of material in all leads and lifts.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge including carriage of material in all leads and lifts. All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer- in-charge including carriage of material in all leads and lifts. . All works above plinth level

Centering and shuttering including strutting, propping etc. and removal of form including carriage of material in all leads and lifts.

Foundations, footings, bases of columns,etc. for mass concrete

Suspended floors, roofs, landings, balconies and access platform

Lintels, beams, plinth beams, girders,bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Edges of slabs and breaks in floors and walls

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level / above plinth level including carriage of materialin all leads and lifts.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Applying cement slurry on R.C.C . slab or cement concrete work using 2.75 kg of cement per sqm. of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of material in all leads and lifts.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of material in all leads and lifts.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including carriage of material in all leads and lifts.

Providing & Fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including carriage of material in all leads & lifts. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws all complete as per the direction of Engineer-In-charge including carriage of material in all leads and lifts.

Providing & fixing 35mm thick single/double leaf fully glazed window shutters made of 1st class ivory coast teak wood having styles & top rail & bottom rail 75mm width and chamferred edged beading 20x12mm for glass panes complete including bright finished/black enamelled iron butt hinges with necessary screws all complete as per the direction of Engineer-In-charge including carriage of material in all leads and lifts.

Providing and Fixing 35mm thick Ivory coast teak Wood wire guage shutters using galvanised M.S guage of I.S.guage designation 85 G with wire of dia 0.56mm for doors, windows & clerestory windows including bright finished black enamelled iron butt hinges with necessary screws etc I/c chamfered edged beading 20x12.5mm size.complete including carriage of material in all leads and lifts. (a) 1st class ivory coast wood.

Providing and Fixing stainless steel sliding door bolt transparent or dyed to required colour and shade with bolts, nuts and screws etc. complete including carriage of material in all leads & lifts. 250x16mm

Providing and fixing stainless steel tower bolt (barrel type) annodized transparent or dyed to required shade and colour with screws etc. complete including carriage of material in all leads & lifts.

Providing and Fixing stainless steel handles annodized transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of material in all leads & lifts.

Providing and Fixing Stainless steel hook & eyes with necessary screws or welding to chowakat including carriage of material in all leads and lifts.150mm.

Providing and fixing 10 mm thick anti skid, acid or alkali resistant vertified tiles of any size & any colour of approved make acid and/or alkali resisting mortar bedding, and joints filled with epoxy grouting with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge including carriage of material in all leads & lifts. In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Anti skid,Acid and alkali resistant tile

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, In flooring over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete i/c cutting the tiles wherever required including carriage of material in all leads &lifts.

Providing and laying 8mm thick Vitrified tiles of appproved make of any colour and any size ( with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints with epoxy i/c cost for cutting the tiles whwrever required, including carriage of material in all leads & lifts.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts.

In stringers, treads, landings etc. of stair cases, including use of chequered plate , gratings, frames, guard bar, ladder, railings, brackets, gates and similar workswherever required, all complete

6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand) including carriage of material in all leads and lifts.

15 mm cement plaster on the fair side of internal or external wall of mix 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts.

20 mm cement plaster on the rough side of internal or external wall of mix 1:6 (1 cement: 6 fine sand) including carriage of material in all leads & lifts.

Providing and applying white cement based putty of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete in all respect as per specifiaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Painting with ppremium acrylic emulsion paint on interior grade, of approved brand and manufacture, two or more coat including applying additional coats wherever required to achieve even shade and colourcomplete in all respect as per specifiaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

On Wall

On Ceiling.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete in all respect as per specifiaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications including carriage of material in all leads & lifts. Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete in all respect as per specifiaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Removing white wash or colour wash by steel wire brushing and/or scrapping sand papering and preparing the wall surface smooth including necessary repairs to scratches complete in all respect as per specifiaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Demolishing cement concrete manually/ by mechanical means including disposal of material in all respect a including carriage of material in all leads and lifts.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade complete in all respect as per specifiaction and direction of Engineer-in-charge including carriage of material in all leads and lifts.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, including 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including carriage of material in leads and lifts.

Providing and fixing wash basin with pedstal, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps including carriage of material in leads and lifts.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of material in leads and lifts.32 mm dia

Providning and Fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap i/c carriage of material in all leads & lifts.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 450x350 mm (outer dimensions)including carriage of material in leads and lifts

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete including carriage of material in leads and lifts

Providing and fixing toilet paper holder including carriage of material in leads and lifts

Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in charge.including carriage of material in all leads and lifts.INTERNAL WORK - EXPOSED ON WALL 1620 (20 mm OD) pipe

Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube ittings (earth work in trenches to be measured and paid separately including carriage of material in all leads and lifts.15 mm dia nominal bore

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete including carriage of material in all leads and lifts.25 to 40 mm nominal bore

Providing and Fixing uplasticised PVC connection pipe with brass unions 45 cm length including carriage of material in all leads and lifts 15 mm nominal bore

Providing and fixing G.I./M.I Union of following sizes (Where not included in the items.Including carriage of material in all leads and lifts.15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all leads and lifts 1000 litres net capacity storage tank of ISI marked sintex make with double.layer including MS Stays for water storage tank.

Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipe ISI marked i/c fixing with approved adhensive (i/c PVC clips where ever required) including carriage of material in leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and fixing PVC Plain bend ISI marked complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

P/F PVC Single equal branch ISI marked of required degree with oval access door insertion rubber washer 3mm thick bolts and nuts complete i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts

90mm nominal size.

110mm nominal size.

Providing and fixing (ISI marked) PVC cowl i/c fixing with approved adhensive etc complete including carriage of material in all leads and lifts.

90mm nominal size.

110mm nominal size.

Providing and Fixing C.P. Brass towel ring fixed with Plastic Gitti, drilling hole, C.P. brass screws etc complete in all respects including carriage of material in all leads and lifts.

Providning and Fixing C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 690 gms..15mm dia

Short Body

Providng and Fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of material in all leads and lifts. 15mm nominal bore

Providing and Fixing brass full way valve with wheel Including carriage of material in all leads and lifts.15mm nominal bore

Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1 cement: 6 sand) per CMs depth of cutting (i) Holes upto and including 400 sqcm in area including carriage of material in all leads and lifts

Providing chases 75mm wide 50mm deep (average size) in walls for conduit pipes and filling the same with cement concrete 1:3:6 (1 Cement : 3 Sand : 6 Graded stone aggregate 20 mm and down gauge) after the conduit pipe is laid (excluding the cost of conduit pipe) including carriage of materialin all leads and lifts.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: including carriage of material in all leads and lifts. 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design including carriage of material in all leads & lifts. Inside size 90x80 cm and 45 cm deep including S.F.R.C. manhole frame and cover (medium duty) 560 mm internal diameter, total weight of cover and frame to be not less than 173 kg (weight of cover 70 kg and weight of frame 103 kg) with 230mm thick walls of common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of material in all leads & lifts. H D - 20 Circular shape 560 mm internal diameter

Please Enable Macros to View BoQ information