RequiredOEM Authorization Certificate Bid to RA enabled Yes Digital Multimeter ( 2 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) FEATURES Type Hand Held Hand Held
RequiredBenchtop Display (Digits) 4.5 3.5
Required4.5
Required6.5 Measurement Type True RMS Average
RequiredTrue RMS Counts 50000 4000
Required6000
Required50000
Required200000 Or higher MEASUREMENTS DC Voltage Range 1000 600
Required1000 DC Voltage Accuracy 0.5 0.005
Required0.05
Required0.1
Required0.5
Required1 DC Voltage resolution 0.01 0.001
Required0.01
Required0.1
Required1
Required10
Required100 1/5 AC Voltage Range 1000 600
Required1000 AC Voltage Accuracy 0.5 0.08
Required0.1
Required0.5
Required1 AC Voltage resolution 1 0.001
Required0.01
Required0.1
Required1
Required10
Required100 DC Current Range 10 3
Required10 DC Current Accuracy 0.05 0.005
Required0.05
Required1
Required1.5 DC Current resolution 0.1 0.001
Required0.01
Required0.1
Required1
Required10
Required100 AC Current Range 10 3
Required10 AC Current Accuracy 0.5 0.5
Required1
Required1.5 AC Current resolution 0.1 0.001
Required0.01
Required0.1
Required1
Required10
Required100 Resistance Range 500 40
Required50
Required60
Required100
Required500 Resistance Accuracy 0.08 0.08
Required1
Required1.5
Required2
Required2.5
Required3
Required3.5 Resistance resolution 0.1 0.001
Required0.01
Required0.1
Required1
Required10
Required100 Capacitance Range ( Micro farad ) 1 to 100 1 to 100
Required1 to 200
Required.01 to 1000
RequiredNA Capacitance Accuracy ( % ) 1.5 1.5
Required2.5
Required3.5
Required5
RequiredNA Capacitance resolution ( nF ) 1 0.001
Required0.01
Required0.1
Required1
Required10
Required100
RequiredNA Frequency Range ( KHz ) 300 50
Required100
Required200
Required300
RequiredNA Frequency Accuracy ( % ) 0.1 0.1
Required1
RequiredNA Frequency resolution ( Hz ) 0.1 0.001
Required0.01
Required0.1
Required1
Required10
Required100
RequiredNA Temperature Range ( Degree C ) -50 to 1000 -40 to 400
Required-50 to 1000
RequiredNA Temperature Accuracy ( % ) 1.5 1.5
Required2
RequiredNA Temperature resolution ( Degree C ) 1 0.001
Required0.01
Required0.1
Required1
Required10
Required100
RequiredNA OTHER FEATURES Continuity test and Diode test Available * Data logging Available * If Data Logging Feature is Available
RequiredInternal Memory min. 5000 points/200 readings * Computer Interface along with software Not Available * 2/5 Dimensions ( mm X mm X mm ) - * Weight 870.9 * Other Features - * SAFETY Safety Rating Category IV 600 V of IEC 61010 Category II 600 V of IEC 61010.
RequiredCategory II 1000 V of IEC 61010.
RequiredCategory III 600 V of IEC 61010.
RequiredCategory III 1000 V of IEC 61010.
RequiredCategory IV 600 V of IEC 61010
RequiredCategory IV 1000 V of IEC 61010 Safety Certification UL
RequiredCE
RequiredCSA
RequiredTUV * POWER REQUIREMENTS Power Requirements Battery Operated * if Battery Operated
Requiredthen Type of Battery Non- Rechargeable (Alkaline) * if rechargeable
Requiredthen chemistry of the battery lithium ion * if Non-rechargeable
Requiredthen size of the battery cell AA * number of non- rechargeable the battery/cell NA * Voltage of rechargeable Battery 9 * capacity of rechargeable battery(milli Ampere Hour) 100 * Suitable charger adaptor provided NA * ACCESSORIES Standard Accessories Supplied with the Equipment - * WARRANTY Warranty 3 1
Required2
Required3
Required5 OPERATING CONDITION Minimum Operating Temperature -20 * Maximum Operating Condition 55 * Operating Humidity (RH) 90 * TEST REPORT DETAILS The equipment supplied with calibration certificate YES * 3/5 conformity to Dry Heat for 16 hrs at a specified maximum temp in accordance with IS:900 0/part-3/section-5/1977 latest No * conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:900 0/part-2/section-4/1977 latest No * conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 hrs each at a temp of 40 degree C & 95% RH No * Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification Yes * Test Report Number and date for the specification test - * Name and address of the Lab for the specification test - * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer. Additional Specification Documents
